160 manufacturers · 18,987 products

The Sure-Lites INVM Series are a single phase, compact design mini inverter systems that provide 175VA to 1100VA emergency power to LED, fluourescent, incandescent and HID lighting loads. PWM/MOSFET technology provides pure sine wave emergency power (clean power) within 8ms to 24ms of transfer time. Field selectable 120/120 or 277/277VAC input/output allow easier installation. The INVM series are UL 924-listed and provide 90 minutes of emergency power for egress lighting. Small cabinet footprints and multiple mounting means including grid ceiling, recessed wall or standard wall mounted for the 175VA units and floor or wall mounting for the 350VA through 1100VA units allow flexibility for building space limitations.

The Sure-Lites INV-I-S Single Phase inverter is an interruptible, PWM inverter type utilizing IGBT technology with 50ms transfer time. Should utility power fail, the Sure-Lites INV-I-S Single Phase inverter takes over and provides output power to the critical load. Its sealed lead calcium batteries will power emergency lighting circuits for 90 minutes (UL 924). Other run times and voltages are available; please contact your Cooper Lighting Solutions representative.

The Sure-Lites INVSM-S Series is a single phase, compact design inverter that provides 1.0kVA to 2.8kVA of emergency power to HID, LED and all lighting loads. This pulse-width modulated (PWM) inverter utilizes IGBT technology to provide a perfect sine wave (clean power) of emergency AC power with two milliseconds of transfer time. The unit's operating efficiency is 98 percent, which is well above a typical fast transfer inverter. The INVSM-S series is UL 924-listed and provides 90 minutes of emergency power for egress lighting. Standard input / output voltages are 120 VAC or 277 VAC. Other run times and voltages are available; please consult your Cooper Lighting Solutions representative.

The Sure-Lites INV-T Three Phase Series represents the highest performance in uninterruptible technology while the transistorized inverter is providing power protection. Ready for virtually any emergency with this stand by power system, this pulse-width modulated inverter has a two millisecond transfer time. The AC in to AC out operating efficiency is typically 98 percent, well above a typical fast transfer inverter. The internal construction of each cabinet consists of an AC-to-DC battery charger and a DC-to-AC inverter.

The Sure-Lites INV-U-S Series is a single phase inverter that provides uninterrupted power. This pulse-width modulated inverter utilizes IGBT technology and has a two millisecond transfer time. The unit's operating efficiency is 98 percent, which is well above a typical fast transfer inverter. The C Series inverter is UL 924-listed and meets NFPA 101 requirements by providing 90 minutes of illumination for emergency egress lighting. Other run times and voltages are available; please consult your Cooper Lighting Solutions representative.

The Sure-Lites INV series is a UL Listed stand-alone modified sine wave output inverter designed to provide power to designated emergency lighting fixtures. In a power loss situation, the unit will supply 20/35/55/110/220/375/600 Watts of power from the onboard battery supply. It works in conjunction with incandescent, LED, and fluorescent lamps and fixture types and will automatically run switched, normally-on, or normally-off designated emergency fixtures. The INV series is ideal for applications requiring an emergency source for lighting arrangements that utilize multiple lamp and fixture types. Installation options include surface mount, recessed or T-grid. The series has a self-diagnostics option and comes with a three-year product warranty and seven-year pro-rated battery warranty.

The Westwood 903 and 903-2 are ultra-compact MR16 line voltage fixtures with integral 12-volt step-down transformers. Each mounts directly over any standard 4-inch wall-mounted J-box. Various lenses, louvers, and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects.

Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.

Steps 347V line voltage down to 120V fixture operating voltage. 75VA max. For use with Non-IC housings.

Power-Trac Transformer. Allows use of Linea track fixtures and pendants on Halo Power-Trac or Lazer Track Finishes.

Instead of pulling line-voltage to low-voltage transformers installed every few feet, bring line voltage to the DLVP power module and pull pre-terminated, low-voltage cable to every fixture, sensor, control, and receptacle control in a space. Available in 2 power levels (300 and 600W), UL924 listed, and pre-assembled, DLVP delivers out-of-the-box, “plug and play” code compliance.

The External Power Supply is a system accessory for the Greengate Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed.

This remote electronic transformer converts standard 120 volt line-voltage to 12 volts, providing the necessary voltage for powering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system.

WallStation 120-230VAC Input in White

6 CHs ~ 350mA, 2-21 VDC, 44.1W Remote Power Supply

Small Electronic Transformer Enclosure

Remote Enclosed Power Supply 100-277VAC Input 24VDC Output 60 Watt

Enclosed Electronic Transformer 120V Input 12V Output 100 Watt

Electronic Class 2 Transformer 120V Input 12V Output 60 Watt

Remote Enclosed Electronic Transformer for Line and Straight Edge 120V Input 24V Output 96 Watt

60W 120-277VAC INPUT 24VDC Power Supply

Large Electronic Transformer Enclosure

Plug-in Electronic Transformer with Open Splice 120V Input 24V Output 60 Watt

Remote Power Supply 100-277VAC Input 24VDC Output 96 Watt

1 CH ~ 600mA, 9-23VDC, 13.8W Remote Power Supply

Remote Enclosed Electronic Transformer for InvisiLED® Tape Light 120V Input 24V Output 96 Watt

6 CHs ~ 600mA, 2-21 VDC, 75.6W Remote Power Supply

Plug-in Power Supply 120-240V Input 24V Output 20 Watt

12in Lead Wire for InvisiLED® 24V Transformer to Tape Light

Remote Enclosed Power Supply 120-277VAC Input 24VDC Output 96 Watt

Remote Enclosed Power Supply 100-277VAC Input 24VDC Output 96 Watt

Electronic Class 2 Transformer 120V Input 24V Output 100 Watt

60W 120-277VAC INPUT 24VDC Power Supply

Enclosed Electronic Class 2 Transformer 120V Input 12V Output 2 x 60W = 120W

Remote Enclosed Power Supply 120-277VAC Input 24VDC Output 96 Watt

Electronic Class 2 Transformer 120V Input 24V Output 60 Watt

Electronic Class 2 Transformer 120V Input 24VDC Output 60 Watt

Electronic Class 2 Transformer 120V Input 24VDC Output 96 Watt

1 CH ~ 350mA, 9-23VDC, 8.05W Remote Power Supply

Remote Enclosed Power Supply 100-277VAC Input 24VDC Output 60 Watt

96W 120-277VAC INPUT 24VDC Power Supply

Plug-in Electronic Transformer for InvisLED Tape Light 120V Input 24V Output 100 Watt

Plug-in Electronic Transformer for Line and Straight Edge 120V Input 24V Output 96 Watt

Plug-in Electronic Transformer 120V Input 12V Output 60 Watt in Black

Portable Power Supply 100-277VAC Input 24VDC 60 Watt

Electronic Transformer 120V Input 12V Output 100 Watt

Remote Power Supply 100-277VAC Input 24VDC Output 300 Watt

Remote Enclosed Power Supply 100-277VAC Input 24VDC Output 60 Watt

H Track Quick Connect™ Low Voltage Transformer in Black

2.5in Under Cabinet Remodel Non-IC Housing for Remote Transformer

Remote Enclosed Electronic Transformer 120V Input 24V DC Output 60 Watt

Magnitude'sM60L24DC-ARis the most compact LED driver on the market with a magnetic transformer core. It is equipped with two auto-reset breakers, one on the input and one on the output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs, one on each side, to enable easy installation that complies with electrical code requirements.Class 2 magnetic dimming Connect a compatible TRIAC dimmer and dim up to 60W of 24VDC LED products Dual protection/div>Primary and secondary auto-reset circuit breakers Low profile One of the most compact housings for a fully magnetic transformer core

Magnitude'sM150L24DC-ARis the most compact LED driver on the market with a magnetic transformer core. It is equipped with two auto-reset breakers, one on the input and one on the output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to enable easy installation that complies with electrical code requirements.Magnetic dimming Connect a compatible TRIAC dimmer and dim up to 150W of 24VDC LED products Dual protection/div>Primary and secondary auto-reset circuit breakers Low profile One of the most compact housings for a fully magnetic transformer core

Magnitude'sM96L24DC-ARis the most compact LED driver on the market with a magnetic transformer core. It is equipped with two auto-reset breakers, one on the input and one on the output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs, one on each side, to enable easy installation that complies with electrical code requirements.Class 2 magnetic dimming Connect a compatible TRIAC dimmer and dim up to 96W of 24VDC LED products Dual protection/div>Primary and secondary auto-reset circuit breakers Low profile One of the most compact housings for a fully magnetic transformer core

Magnitude’sM300L24DCis the most compact LED driver on the market with a magnetic transformer core. It is equipped with two push-to-reset circuit breakers on the input and output, which protect both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to enable easy installation that complies with electrical code requirements.Magnetic dimming Connect a compatible TRIAC dimmer and dim up to 300W of 24VDC LED products Dual protection/div>Primary and secondary auto-reset circuit breakers Low profile One of the most compact housings for a fully magnetic transformer core

Dyna Accent Miniis a compact, high power, LED floodlight designed to fit in the tightest of spaces. It features an internal100-240VAC power supply, onboard DMX+RDM driver, and each unit carries Acclaim’s Aria wireless DMX technology inside. Dyna Accent Mini can be mounted in three ways, via the junction box mount, surface mount, or stake mount for landscape applications. It comes with a narrow 7º or 12º beam standard, with optional quick-change spread lenses for wider applications. It’s low profile and high output make it the perfect solution for outdoor commercial and landscape flood projects. Expand your palette Spectrum Technology gives you more usable colors, including pastels, dedicated whites, and dynamic white options, all in the same system Over the air Every Dyna Accent Mini features a direct connetion to Acclaim's Aria Wireless DMX system Ready for the elements IP66 (wet location), IK07 impact protection, and 3G rated for high vibration and bridge applications

Remote 277V 300W Class II Magnetic Transformer. Up to 6x50W connections, dimmable with any incandescent dimmer. 15′ wire max. each.

Remote 120V 50W Magnetic Transformer. Reset breaker on primary, dimmable with low voltage magnetic dimmers (i.e. Lutron Diva).

Remote 120V Magnetic Transformer. Dimmable with Magnetic Low Voltage Dimmers ( i.e. Lutron Diva ); Suitable for use with 9 Watt Max, LED type MR16’s.

Remote 277V 300W Magnetic Transformer. Reset breaker on primary, dimmable with low voltage magnetic dimmers (i.e. Lutron Diva).