Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
14,306 products
BrandAll▾
SortRelevance▾
Round straight aluminum pole, comes in 3 diameter sizes: 4", 5", 6" and 6.625". Height range from 8ft - 30ft maximum. 7 or 11 gauge wall thickness. 10" - 13" bolt circle. Drill mount or tenon mount with optional tenon adapters. Slotted base plate. Aluminum base plate cover and pole cap. Extruded 6063 alloy shaft, heat treated to a T6 temper. Cast aluminum gusseted base plate, A-356 aluminum, heat treated to a t6 temper. Continuous circumferential welding of shaft and base plate (both inside bottom and outside top). Reinforced hand hole. Polyester powdercoat standard. Anodized shaft option.
Surface mounted wet location low level floodlight with a shallow depth of only 4″. Their unique Regress Lens design is advantageous in that it cuts out pixilation and glare often seen with flat lenses and is more difficult to vandalize. Indirect LED lamps combined with the high purity aluminum reflector system provides high light levels with low energy usage.
The IW LED Series provides a powerful, high angle, asymmetric wash of smooth even lighting. The totally indirect optical design shields the LEDs from any viewing angle. Ideal for lighting presenters in Video Conferencing applications.
The AK LED Series provides a powerful, high-performance asymmetric wash of smooth, even lighting. In addition to being an exceptional wall wash luminaire, it is shallow enough to recess into a standard stud wall to light the ceiling or floor. LED’s are totally indirect.
The DW LED Series of wall washer/grazer fixtures are designed for placement against or close to the wall (8-12″). When the application requires a wall wash fixture close to the wall, this fixture’s strong vertical throw of light smooths the brightness at the top of the wall to provide even, unscalloped illumination.
The HITW LED Series is a unique variety of LED cast GRG (Glass fiber Reinforced Gypsum) fixtures that provide an asymmetric throw of light and integrate into the structure. The GRG castings are available in many sizes from 4×6″ to 8×54″ for the aperture.
Wet location low level floodlights. Shallow recess depth (4″) allows easy incorporation into exterior walls. They are provided standard with a unique Regress Lens. The lens design is advantageous in that it cuts out pixilation and glare often seen with flat lenses and is more difficult to vandalize. Indirect LED lamps combined with the high purity aluminum reflector system provides high light levels with low energy usage.
LS LED Series low level steplight provides a soft asymmetric wash of light. The indirect optical design shields the LEDs at any viewing angle. Offered in Trimless, Trimmed and Back to Back models.
The VT LED Series is the leading Video/Tele Conference fixture sold worldwide. The unique indirect LED fixtures comfortably provide vertical illumination on participants, minimizing facial shadowing, while keeping direct light/glare off of the monitor and camera.
Video/Tele Conference fixtures. Unique, indirect 2´ x 2´ LED fixtures provide even vertical illumination in three directions. They comfortably illuminate participants with minimal facial shadowing while keeping direct light/glare off of the monitor and camera.
From programmable light levels to multiple dimming options, our highly configurable luminaire packs in all the options you need. The new BW165 balances visual comfort, performance and tunable white light ranging from 6500K down to 2700K in an easy to specify platform that’s perfectly positioned for today’s competitive marketplace.
Wall Wash/Wal Graze Architectural
Small Profile 1.65” Recessed Linear Flush BW165RF The BW165 by Birchwood Lighting sets a new standard in linear architectural illumination with its intuitive specification, improved installation, and ease of service, all within a 1.65” wide platform. This specification-friendly, no compromise solution is ideal for recessed straight runs, shapes, walls, and wet location covered canopy applications.
4 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
2 Zone ON/OFF Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
"Outdoor Sensor with Dual Lampholders. Wall or Soffit. Low-rise residential exterior locations including entryways, carports, patios and balconies. The STEINEL FL 300 Outdoor Sensor with dual PAR Lampholders convenient configuration enhances security and energy savings for outdoor lighting. The FL 300 is passive infrared and esponds to moving persons or other heat-emitting objects (such as vehicles). Using a multi-segmented lens to view the controlled area, the sensors switch lighting ON pon occupancy and OFF after a period of time where no motion has been detected." Low-rise residential exterior locations including entryways, carports, patios and balconies
PIR Occupancy Sensor. Ceiling Mount Recessed. IP65. Required by planners and architects, made by STEINEL. The IR Quattro MICRO fulfills many wishes. Its small size and the low profile design make it perfect for applications where disturbing installations on the ceiling are to be avoided. The micro-precision lens measures just 15 x 15 mm. Its performance is nevertheless stunning. The 360° infrared presence detector detects 36 m². And the IP65 classification lets you install it in rooms that are subject to moisture. The IR Quattro MICRO – our smallest unit with huge potential.
DCS Controller. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new Digital Control Solution answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, it is the Smarter Digital Control Solution.
Photo Sensor. Open Loop or Closed Loop Photo Sensor. Ceiling Mount. The PS WL, Photo Sensor, is a low voltage photocell used for controlling lighting circuits based on natural daylight. It works with the STEINEL DCS by signalling a change in light levels to the controller. Designed for an outdoor wet location mounting that is safe for sunlight exposure or indoor location.
Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 100 is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. These are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.
DCS Connect with BACnet. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new DCS Connect answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, this model has BACnet allowing a building intelligence and managment control integration.
6 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Super Duty Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 200 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 200 is a Class 2 Output Power Supply, suitable for parallel interconnection. Wires: All wires have UL Style 1659, 250°C, 600V insulation: • 18 AWG: Black for Line and White for Neutral • 12 AWG: two Red wires for normally closed dry contact from the 20A relay • 22 AWG: 5 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Brown (Communication Link), Gray (Switch Input)
Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150 is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devides. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.
Super Duty Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 250 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 250 contains force on and force off inputs for use with a building management system and an isolated normally open and normally closed relay for signaling a BMS, HVAC controls or other low voltage devices. The TR 250 is a Class 2 Output Power Supplies, suitable for parallel interconnection.
Universal Smart Remote Commissioning Tool. iOS and Android App. The STEINEL Smart Remote (commissioning tool) gives the installer the ability to set basic functions of the entire line of the Control Pro Series of sensors via remote control. Simply download the free iOS or Android APP to any smartphone or tablet and connect via Bluetooth to the Smart Remote. Installer / commisioning agent can commission all STEINEL Control Pro and KNX sensors remotely with ease and convienance. The commissioning agent can save and reload commonly used setting profiles for repetitive commissioning of typical room types.
Dimming Switch . 1 Zone. 1 Slider and 1 Button. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Multi Switch. 3 Dimming Zones. 3 Scenes and Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
2 Button Scene Switch. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Wire Guard Cage. For Control Pro Presence Detectors. It provides protection from damage, e.g. from balls or vandals. Suitable for the following Presence Control PRO presence detectors and connection options: IR Quattro HD, IR Quattro, HF 360 and Dual HF.
3 Zone ON/OFF Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Dimming Switch . 2 Zone. 2 Sliders and 2 Buttons. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Dimming Switch . 3 Zone. 3 Sliders and 3 Buttons. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
The IS 3360 DCS is part of the STEINEL family of high performance commercial motion detection sensors. With 360° of uninterrupted coverage, the IS 3360 DCS provides exceptional lighting control in a wide range of indoor and outdoor spaces and is recommeneded for use in applications such as sports arenas, stairwells, underground parking, parking garages, equipment rooms and warehouses. IS 3360 DCS sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage DCS wall switch. After a period of time where no occupancy has been detected, the sensor switches lighting OFF. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communications to the sensor by the 2 wire bus.
Single Zone ON/OFF Switch. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
"Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’. The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold OFF photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’.
5.8 GHz High Frequency Fixture Integrated 360° Sensor. The HFLUM2-WR is a line voltage occupancy sensor module that installs in a fixture, adding energy saving lighting control in each fixture location. The HFLUM2-WR uses STEINEL’s High Frequency (HF) technology to turn lights on and off based on occupancy. It works by emitting high frequency electromagnetic waves (5.8 GHz) into the controlled area. Movement in the area causes a change in the waves’ echo, resulting in occupancy detection. The sensor can detect motion through many materials including glass and the lens of a fixture, enabling the sensor to be hidden from view.
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
PIR. Outdoor 360° Ceiling Mount Sensor. The STEINEL IS 360 occupancy sensor is rain tight for safe reliable operation indoors and out. The sensors are passive infrared and respond to heat radiated from moving persons or other heat-emitting objects (such as vehicles). They automatically turn lights on when presence is detected and off when a space is left vacant. For unmatched coverage, the IS 360 incorporates three highly sensitive pyroelectric sensors that provide reliable, uninterrupted 360 coverage.
PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.
Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 2 Button. The DT VS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.
Dimming Switch. 2 Zone. 2 Sliders and 2 Buttons. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Multi Switch. 3 Dimming Zones. 3 Scenes and Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.
Dimming Switch. 1 Zone. 1 Slider and 1 Button. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.
Power Pack. Auto (ON) Switching. 20 Amp. Relay. The TR 100-A is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 4 low voltage conductors: Red (+24VDC), Black (-24VDC), Blue (Control Input), Gray (Momentary Switch Input)
Power Pack. Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150-A is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 9 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Orange ( Force On), Brown (Force Off), Gray (Momentary Switch Input), Yellow (Isolated Relay Common), Yellow with Red Stripes (Normally Open Isolated Relay), Yellow with Black Stripes (Normally Closed Isolated Relay)
Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.