160 manufacturers · 18,987 products

Madrid is an architectural grade flexible tape light for direct 120 Volt input. No driver needed, it connects directly to line voltage, with an open bare wire. This enables run lengths up to 164 feet. Can be installed into extrusions or can be mounted directly to surfaces with mounting clips. MacAdam Step 3 binning. CRI90 IP65 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft18Output (lm/ft)270-320Consumption (watt/ft)4.0Efficacy (lm/watt)67-80Beam Angle120°Voltage120VMax Run Length164 ftCustomization Increment4" Madrid M-L300 Installation Guide 120V Tapelight

The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04

IP42 Dimming OptionNon-DimmingIP RatingIP42Output Power12 WattInput Voltage90~264VACOutput Voltage24V DCDimension (in)3.03 x 1.57 x 1.14SafetyUL8750 NTR12IP42

IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power108 WattInput Voltage88~264VACOutput Voltage24V DCDimension (in)6.26 x 3.81 x 1.5SafetyUL60950-1 NTR100IP00

Mounting Clip for Madrid tapelight

End cap for JF04 Extrusion + JF04-CL90 / JF04-SL90 Lens

Satined round lens extrusion VT03 (Ø 2 9⁄32″) MaterialPMMA / PCColorMilky WhiteDimension (in)Length - 78 3⁄4 , Ø 2 9⁄32CustomizationCut to specified length

IP00 Dimming OptionNon-DimmingIP RatingIP00Output Power156 WattInput Voltage88 ~ 132VACOutput Voltage24V DCDimension (in)7.83 x 3.86 x 1.5SafetyUL60950-1 NTR150IP00

End cap for JG04 Extrusion + JG04-SL Lens

End cap for JF04 Extrusion + JF04-CL / JF04-SL Lens

London Wave is an improved Neon Flex replacement using latest LED technology and creates pixelation free light lines, straight or curved. Made from UV stabilized silicone. Mounts to the surface with mounting clips or aluminum extrusion.

London Wave Side View is made from flexible PMMA and bends in the horizontal axis. Due to using PMMA and not silicone (which is the standard material for this kind of product), LWSV is walk-over rated and IP67. Can be installed in wooden decks, concrete pour applications and is often used as under-bench lighting. CRI90 IP67 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>90LEDs/ft36Output (lm/ft)102-120Consumption (watt/ft)2.9Efficacy (lm/watt)35-41Beam Angle120°Voltage24V DCMax Run Length42 ftCustomization Increment2" London Wave SV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 Color (CCT)RGBWBeam Angle120°Voltage24V DCCustomization Increment2.8" Liquid Light LTV

OSLO L1000 was specifically developed to be used with extrusion JD01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 2.2” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft195Output (lm/ft)~ 1000Consumption (watt/ft)12.1Efficacy (lm/watt)83Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight

OSLO L450 was specifically developed to be used with extrusion JB01. The lumen output is arranged in a way that enables the use of the widths of fixtures with the exact same light density. Thus, the respective 1” wide diffusers will look uniform and harmonious. Using high quality components, OSLO comes with CRI>95 and maximum run lengths of 47’ due to the use of thick copper conductors and ICs along the tapes. CRI95 IP20 Color (CCT)2700K, 3000K, 3500K, 4000KCRI>95LEDs/ft97Output (lm/ft)~ 450Consumption (watt/ft)5.5Efficacy (lm/watt)91Beam Angle120°Voltage24V DCMax Run Length47 ftCustomization Increment1/2" Oslo Installation Guide 24V Tapelight

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. CRI80 IP68 Color (CCT)2700K 3000K 3200K 3500K 4000K 5000K 6500KCRI>80LEDs/ft44Output (lm/ft)276-290Consumption (watt/ft)4.6Efficacy (lm/watt)60-63Beam Angle120°Voltage24V DCMax Run Length32 ftCustomization Increment1.6" Liquid Light LSV

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 ColorTunable WhiteLEDs/ft73Beam Angle120°Voltage24V DCCustomization Increment2" Liquid Light LSV

IP67 Dimming OptionDimming (0-10V)IP RatingIP67Output Power40.08 WattInput Voltage90~305VACOutput Voltage24V DCDimension (in)6.4 x 1.69 x 1.26SafetyUL8750; Design refer to UL60950-1 DTR40IP67

End cap for Liquid Light – Large Top View

Content here

Liquid Light Large Side View is submersible due to being fully encapsulated with high quality, UV stabilized Polyurethane. IP68 rated, solvent as well as saltwater resistant, it can be used in pools, fountains and for marine applications. Bends in the horizontal axis. IP68 ColorStatic AmberLEDs/ft44Beam Angle120°Voltage24V DCCustomization Increment1.6” Liquid Light LSV

End cap for Liquid Light – Large Side View

End cap for Liquid Light – Small Side View

CRI90 IP67 Color (CCT)2700K-4000KCRI>90LEDs/ft73Output (lm/ft)60-853Consumption (watt/ft)5.8Efficacy (lm/watt)23Beam Angle120°Voltage24V DCMax Run Length16 ftCustomization Increment2” Phantom OS

IP67 Color (CCT)RGBW (W=3000K)LEDs/ft29Consumption (watt/ft)7.3Efficacy (lm/watt)23Beam Angle120°Voltage24V DCMax Run Length16 ftCustomization Increment2” Phantom OS

The CT06 is a unique extrusion that is made from high quality anodized aluminum, it is compact giving this extrusion dual functionality as both a closet rod and lighting fixture. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 19⁄32 x 11⁄32CustomizationCut to specified length CT06

The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length LB03OUT

The PH02 is a recessed or surface mounted walk-over fixture that consists of the outer solid aluminum and the sturdy inner, one-piece PMMA extrusion. This fixture can withstand a maximum weight of 30kN and is considered IP67. This extrusion creates uniform light lines and can be used as single fixture or combining several fixtures without shadows, to create continuous seamless light lines and makes for an excellent outdoor and indoor linear light. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 13⁄16 x 1 49⁄64CustomizationCut to specified length PH02

The LB03OUT is a unique extrusion with innovative design that allows to transform an outer dry wall corner into a stunning and refined line of light that can be customized in white, tunable white, in static colors or RGB. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 33⁄64 x 13⁄32CustomizationCut to specified length

The AA01 is a fully regressed and flangeless dome extrusion giving indirect light. The entirely indirect light combined with the 3-dimensional effect make this product a unique and outstanding architectural detail of immense esthetical beauty. Can be customized on site. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 13⁄16 x 1 53⁄64CustomizationCut to specified length AA01

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

The YT02 is a small surface mounted extrusion that is made using quality anodized aluminum. Offering great heat dissipation capabilities, the YT02 is best suited for a low-medium output tape light range. The YT line is known for its size and versatility in applications, which can help facilitate the project specification process. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 11⁄16 x 11⁄32CustomizationCut to specified length YT02

RF Receiver – RGBW/Tunable White , 5 Channel C94.92-RF

RF Receiver – RGBW , 4 Channel C94-RF

RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V C91-RF

DMX/RF – WiFi Controller CRF-WIFI

RF to DMX Converter CRF-DMX

DMX Decoder – 12 channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX12C

DMX Decoder – 5 Channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX5C

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel C94-3ZW

IP67 Dimming OptionDimming (Forward Phase)IP RatingIP67Output Power75 WattInput Voltage120V ACOutput Voltage24V DCDimension (in)4.92 x 2.2 x 0.79SafetyUL8750 FPD75IP67

IP67 Dimming OptionDimming (Forward Phase)IP RatingIP67Output Power40 WattInput Voltage120V ACOutput Voltage24V DCDimension (in)4.92 x 2.2 x 0.79SafetyUL8750 FPD40IP67