160 manufacturers · 18,987 products

A LED lamp collection composed of a suspension (S), ceiling (C), and two wall (W and ARM) versions. Made of aluminium, they feature an opal polycarbonate diffuser and emit direct (1L) or indirect (1L) light, or both (2L), except for the Marc C (1L). The entire collection is available in different finishes: matte grey, satin white, satin black, and oak laminate. A version featuring two “on” settings and a dimmer version are available. Other measurements, finishes and an emergency kit are optional.

A LED lamp collection composed of a suspension (S), ceiling (C), and two wall (W and ARM) versions. Made of aluminium, they feature an opal polycarbonate diffuser and emit direct (1L) or indirect (1L) light, or both (2L), except for the Marc C (1L). The entire collection is available in different finishes: matte grey, satin white, satin black, and oak laminate. A version featuring two “on” settings and a dimmer version are available. Other measurements, finishes and an emergency kit are optional.

Range of outdoor lamps with geometric forms, available in three sizes. Made from corten steel or 316L stainless steel.

Dual-light wall lamp (2L) with an ambient indirect light (touch-dim) and an adjustable direct light (touch on-off). Also available with a single direct source of light (1L). The light source is a high-luminance LED, which features a glass lens to focus the light and improve performance. Available in two finishes: textured white matte outer finish with a satin brass interior, and textured black matte exterior with satin copper interior.

Aluminium ceiling lamp shaped like a circular ring. For its light source, it uses LED floodlight modules that provide uniform lighting. Finishes: matte white, matte bronze, matte black, natural oak wood or walnut. Available in three sizes. Dimmer.

Decorative wall lamp consisting of an opal glass sphere and metal components finished in matte brass or black varnish. Available in two versions: diffused light (1L), or diffused light and adjustable beam for reading (2L).

Decorative table lamp consisting of an opal glass sphere and metal components finished in satin brass or black varnish.

Suspension lamp consisting of one (S1) or two (S2) opal glass spheres. Its metal components are available in two finishes: satin brass or matte black.

Decorative floor lamp consisting of an opal glass sphere and metal components finished in satin brass or matte black.

Lighting system that allows adapting the lighting to the spaces by using different wall or ceiling accessories. It is a tubular system to which lighted blown-glass spheres in an opal white finish, from the C_Ball decorative lamp collection, are attached. Its metal parts are available in a matte black finish.

Floor lamp featuring a double shaft and two heads, both adjustable. The light source is a high-luminance LED bulb, which includes a glass lens that concentrates the light and enhances its output. Available in two finishes: textured white matte outer finish with a satin brass interior, and textured black matte exterior with satin copper interior. Dual-light.

The Ring collection is based on a 25 cm ring that contains a LED light with a 18 cm glass diffuser, creating a space that gives the lamps a visually light look.

BIMU is a simple three-dimensional linear lighting system based on linear components measuring 1000, 1500 and 2000 mm in length and 20 mm in diameter. The linear components are interlinked via a system of fast-connection jacks that allows the light source to be freely rotated on its axis. In addition, the system allows the luminaire to be installed in a stepped format at different heights and angles (its small ears mean the angles are absorbed very naturally). Finishes: Matte black, matte white and black orange.

The SENSORWORX Emergency Power Control device provides a simple method of converting standard light fixtures into emergency light fixures for a UL924 compliant emergency application. Designed by LVS Controls, the SWX-EPC-2 family ensures compliance with both life safety and energy codes and eliminates the wasted energy that is used when emergency lighting is kept on 24 hours a day. These devices are typically ceiling or wall mounted in a junction box with a single gang plaster ring and are usually located in the area where the emergency fixtures are installed.

The SENSORWORX Emergency Power Control device provides a simple method of converting standard light fixtures into emergency light fixtures for a UL924 compliant emergency application. The SWX-EPC-A-2 family ensures compliance with both life safety and energy codes and eliminates the wasted energy that is used when emergency lighting is kept on 24 hours a day. These devices have both ears and a chase nipple, allowing them to be mounted in a variety of places as needed.

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

SENSORWORX line voltage wide view and hallway occupancy sensors are self-contained lighting control solutions that mount to the wall, corner, or ceiling. Using an adjustable angled bracket and multi-position chase nipple, these sensors reduce contractor installation time and provide a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

SENSORWORX® wide view and hallway occupancy sensors enable mounting to a wall, corner, junction box, or conduit. This flexibility reduces contractor installation time and provides a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

The SENSORWORX® wireless wide view and hallway occupancy sensors are a simple, yet reliable battery powered control solution. Preferred by contractors for their flexible mounting methods, SENSORWORX wireless sensors greatly reduce total installation time and wireless pairing fuss. Requiring just a few seconds per device, SENSORWORX wireless sensors can be linked to one or more wireless load controllers (such as the SWX-851 wireless wall switch, or a SWX-950 series wireless power pack). Additionally, these sensors can be configured to work in applications with other wireless or wired ceiling, corner, or hallway sensors to provide extended coverage in large or irregularly shaped spaces. As with all SENSORWORX products, the latest passive infrared technology and digital signal processing techniques are used to provide unmatched occupant detection performance and energy savings.

The SENSORWORX low voltage decorator wall switch provides an attractive companion wall station for a low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) manual on, partial-on, or full range dimming user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables users to override a space’s lighting off if necessary. Functioning as a momentary switch, this one button wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the SENSORWORX line of wall switch sensors, ensuring a consistent style across multiple spaces on a project. Additionally, the single button switch has an integrated locator LED with multiple color and intensity settings. Three button dimming units have an integrated 0-10V output, intuitive raise/lower buttons, and a five LED level indicator.

The SENSORWORX line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX wireless wall switch load controller links to remote occupancy sensors and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX® remote dimming and on/off wall stations are battery powered devices that provide manual operation of wirelessly controlled lighting. These attractive wall stations greatly reduce total installation time and wireless pairing fuss. Requiring just a few seconds per device, SENSORWORX wireless sensors can be linked to one or more wireless load controllers (such as the SWX-851 wireless wall switch, or a SWX-950 series wireless power pack). Additionally, these devices can be configured to work together with other wireless or wired wall stations to provide dimming and switching control from multiple locations.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SENSORWORX 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SENSORWORX wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The RETROL is a complete retro-solution to convert an older fixture from fluorescent bulbs to a more ecient and flexible LED setup. These kits will be designed for a quick installation. This is your most cost-ecient upgrade path. With your input we can design a solution for almost any existing fixture.

Introducing our new LDE... the newest and most intelligently designed drip edge luminaire on the market. This is the ultimate combination of lighting and water protection for use over doorways. This design features curved contours that are both modern and highly appealing. Available in multiple lengths to match a given door opening. The LDE is as versatile as it is attractive. Constructed from seam-welded extruded aluminum and aluminum cast end caps. Our quick-mount system facilitates installation and maintenance.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

N2M is proud to introduce a new standard in high-quality steel lighting poles. American made steel combined with unwavering accuracy and a wide range of drilling and finish options, make N2M poles the perfect choice for your next project. Our BAA compliant poles are an obvious choice over inferior, imported options.

The XDL4RWL is a recessed wet location LED linear fixture, design with quality craftsmanship. Engineered for quick and easy tool-less installation. The XDL series provides clean lines, smooth continuous runs, and tight lens fitment. Available in continuous runs and custom angles and lengths.

▪ Available in 4000k (neutral white) and 5000k (cool white) color temperatures.* ▪ Long-life LEDs provide 174,000 hours of operation with at least 70% of initial lumen output (L70).** ▪ HBLA-15 delivers 15,297 lumens (140 lumens per watt, LPW) at 4000k, and 15,471 lumens (141 LPW) at 5000k.* ▪ HBLA-23 delivers 22,970 lumens (139 LPW) at 4000k, and 23,223 lumens (140 LPW) at 5000k.* ▪ HBLA-30 delivers 30,394 lumens (140 LPW) at 4000k, and 30,742 lumens (142 LPW) at 5000k.* ▪ Universal 120-277 AC voltage (50-60Hz) is standard.

BAA Compliant LED Exit Sign

BAA Compliant Aluminum LED Edgelit Exit Sign

BAA Compliant Wet-Location Incandescent Emergency Unit

BAA Compliant Semi-Recessed Wet Location MR-16 Emergency Unit

BAA Compliant MR-16 Emergency Unit

BAA Compliant Remote Capable Incandescent Emergency Unit

BAA Compliant LED Exit & Incandescent Emergency Combo

The SB Series is a Fluorescent Strip available in 1’ thru 8’ body lengths. It was designed for surface or suspended mounting applications.

The LPT8 Series is a T8 Low-Profile Knockdown Fluorescent Strip available in 1' through 8' body lengths. It was designed for surface or suspended mounting applications.

The LPT5 Series is a T5 Low-Profile Knockdown Fluorescent Strip available in 2’ thru 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.

The CS Series is a Commercial Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications.. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.

The 2ST Series is a 2 Lamp Staggered Fluorescent Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for our 2ST. The staggered lamp concept allows for a continuous row of illumination when ran end to end to eliminate dark spots in signs, and continuous run applications, such as cove lighting.

The 2ST Series is a 2 Lamp Staggered Fluorescent Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for our 2ST. The staggered lamp concept allows for a continuous row of illumination when ran end to end to eliminate dark spots in signs, and continuous run applications, such as cove lighting

A range of small, square and rectangular wall mounted luminaires with options of upward or downward light distributions. Ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLWM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 2 different sizes and in combinations of down, up or up/down light distributions. The CLWM have a decorative spike option for added lighting effects. The CLWM mounts over a 2”x4” switchbox mounted horizontally. Added securing holes are provided to secure the luminaire to the wall surface. Frosted or clear lenses are available

A range of small, square and rectangular surface mounted luminaires with options ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLCM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires.

The 502AE is a stylish choice for any outdoor space. This fixture is available LED and its industrial strength features make it ETL listed and suitable for wet locations. Two lenses on top and bottom of fixture provide uplight and downlight. Advantage's 502AE is designed for wall applications and mounting hardware is included.

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Housing Half Cylinder Open Sconce, Brushed Nickel Trim and Brushed Brass optional. Optical Shade: Sanded White Acrylic Diffuser Creates Excellent Light Distribution and Uniformity. LED: High Efficiency, High CRI, Binned and Mixed to Reach Uniform Light. Electrical High Power Factor, Low THD. Lamp LED Color Temperature Option 3000K, 3500K, 4000K, 5000K. Certification UL/cUL, ETL/cETL Listed, Suitable for Damp Locations.

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations