160 manufacturers · 18,987 products

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Outdoor Contact Input Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present and is intended for outdoor use. This system accessory is used in conjunction with a lighting control panel to switch circuits ON or OFF based on outdoor light levels. The Outdoor Contact Input Photosensor connects to the control panel low voltage switch inputs. The photosensor constantly monitors the level of sunlight and provides a signal to the lighting control panel when the light level crosses the switching threshold.

The Analog Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present. Photosensors use a lens to gather light energy and provide an electrical signal to a controller device that is proportional to the measured light level. The sensor sensitivity is fixed, and based upon the sensor range selected. Available in indoor, outdoor, atrium, and skylight configurations.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OMC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Available as Buy American compliant.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The TSW-MV is ideal for conformance to energy codes where assurance is needed that lights are turned OFF when not in use and an occupancy sensor is not the best application.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

Scene wallstations are pre-engraved low voltage switches that operate on 24 VDC power supplied by the Room Controller or DLVP power module. Each scene wallstation is designed to fit in a standard decorator opening and has two QuickConnect ports for local network connections to eliminate wiring errors. Scene wallstations are Click & Go ready and work immediately upon power up. Click & Go scene wallstations are fully functional out-of-the-box but can be customized to meet your needs using the Room Controller Personal Remote to adjust and save the scene settings.

The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The MicroSet Passive Infrared Line Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is available in both single and dual load control.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.

The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.

Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.

The SP20-RD4 is the latest addition to the Greengate Switchpacks family, delivering a wide array of switching solutions in a single unit. This robust powerpack is designed to deliver unmatched performance. The SP20-RD4 features robust and reliable mechanical latching relays, exclusive fail-safe circuitry, daylight harvesting, bi-level switching and is configurable for energy code requirements. The switchpack is specifically designed to handle high inrush electronic ballast loads and offer unmatched durability and service.

1200VA, 120/277 Volt AC 60Hz, Single-Pole & 3-Way, WBSD-010M-C1 Preset Electro-Mechanical Electronic 0-10VDC Fluorescent Slide Dimmer, 0-10VDC LED Power Supply Dimmer, Suitable for use with Class 1 or Class 2 wiring - White face assembled on device, Ivory and Light Almond color change kits included. The WBSD-010M-C1 can control a load directly or connect to the SP20-RD4 as a manual pushbutton to toggle the load.

The Distributed Low-Voltage Power System personal remote is a handheld IR device used to customize the intensity of LED lighting control zones to achieve a desired lighting scene. The personal remote can also be used to save a created lighting scene to a scene wall station and a scene button on the personal remote for easy recall. The personal remote communicates with the system through an IR interface which is part of an open-loop daylight sensor or closed-loop fixture integrated sensor.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.

The Momentary Decorator Switch is a system accessory for the Greengate Lighting Control System. This switch is recommended for most low voltage switching applications and fits a standard decorator wallplate. The Momentary Decorator Switch is a low voltage contact closure device used with Greengate Lighting Control Panels and Occupancy Sensors. When toggled, the switch momentarily makes a contact closure to the lighting control panel or occupancy sensor, sending an “ON” signal. When not pressed, the switch is in the (open) position.

The Momentary Toggle Switch is a low voltage contact closure switch used with Greengate Lighting Control Panels. When toggled up or down, the switch momentarily makes a contact closure to the lighting control panel, sending an “On” signal and has a center “Off” position. These switches have 0.050” (1.27mm) zinc-plated thick steel mounting straps for corrosion resistance and the combination slot/Phillips head mounting and terminal screws make for ease of installation.

The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

The DALI Installation Checker is a web application that provides a simple way for electrical contractors to test the DALI buses, obtain a list of the devices connected to each DALI bus and compare the as-installed configuration to the as-designed. The tool will allow electrical contractor to eliminate all DALI wiring deficiencies prior to the arrival of the factory specialist hence ensuring on-time startup of a DALI based lighting system.

Fifth Light’s Lighting Control Panel (LCP) is used to control and operate all lighting devices using Digital and Addressable Lighting Interface (DALI) and low-voltage analog signals. It houses the lighting controller, lighting management software and various types of lighting interface modules. Modular design capable to support up to 32 DALI Bus Cards, 48 Digital input cards and 9 Analog Input interfaces hence providing lighting engineers and contractors the flexibility and scalability needed to support all sizes and types of lighting applications, i.e. from small or large facilities, fluorescent to LED, local to networked architecture. Intuitive web based user interface allowing users to manage their lighting system from different computing platforms (desktops, laptops, smart phones, tablets) with access the lighting control network. Factory assembled and pre-wired Lighting Control Panel ready to be installed by the electrical contractor with minimal wiring and eliminating non-valued added on-site panel assembly and wire termination work. LED diagnostics indicators and built-in commissioning mode allowing contractors to easily test and commission the DALI Bus hence reducing the overall commissioning time of a DALI based lighting management system. Built to operate as a local Lighting Control Panel or as part of a distributed lighting control network with multiple lighting control panels and a Central Server Unit for a centralized management of large lighting control system.

Fifth Light’s Relay Panel provides scalable and modular On/Off control over a lighting panel as part of a DALI system for convenient control of multiple On/Off loads.

Fifth Light’s Lighting Management Software (LMS) allows facility managers to design, configure and maintain their facility’s lighting system. The LMS governs all the devices connected to the Fifth Light lighting control panels and the control strategies for each of these devices. Using this intuitive, web-based software application, facility managers are able to easily analyze the building’s lighting system usage and quickly update the system to improve the energy consumption.

The Fifth Light Central Manager is a server-class PC that hosts the Lighting Management Software (LMS). It acts as a system wide historian and global database that holds the system's event journal, system configuration files and interfaces used to interact with third-party applications. The third-party interfaces include BACnet, Web services (XML), Cisco® VoIP, MechoSystems, Somfy® and Embedia. The Central Manager allows users to manage their Fifth Light system via the LMS web-based user interface. All configuration changes made from the Central Manager are then synchronized with each local controller on the system. Similarly all data changes at the local controller level are synchronized in real-time with the Central Manager. The Central Manager provides the capability for: BACnet integration of lighting, Web Services control of lighting, Support for Cisco VoIP phones to control lighting, Centralized shade control along with lighting, and Access from computer browser, mobile phones and tablets.

Fifth Light‘s XML integration module permits 3rd party systems to control and manage the addressable lighting control system. It allows facility managers to provide energy savings and user comfort by easily integrating multiple systems using Web Services.

The Field Relay provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The Fifth Light Virtual Central Manager is an virtualization-ready application tested and certified for a virtual environment powered by VMWare® software. The virtualization-ready application consists of the lighting management software application and the required operating system to run the application. In today’s economy, facility managers must find ways to do more with less, which means reducing operating costs while maintaining the building’s systems. The Fifth Light Virtual Central Manager provides the following benefits. Reducing Hardware Cost – With the Virtual Central Manager, there is no need for dedicated hardware to run the Central Manager. Facility and Utility Cost – In addition to removing the need for dedicated computer hardware, the Virtual Central Manager also reduces the space, power and maintenance required to run the lighting control system. System Availability – The Virtual Central Manager allows users to update their OS, applications and hardware without having to worry about disrupting daily building operations or having hardware/software compatibility issues.

The TSE57 Fifth Light touchscreen provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The Digital Wallstation offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The Fifth Light Sensor Powerpack provides power to low voltage sensors and communicates occupancy data status to the Fifth Light system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The Shade Interface allows users to integrate the Fifth Light system with leading shade control systems providers, i.e. MechoSystems, Somfy® and Embedia. It allows users to send comprehensive commands (up, down, go to scene, position and stop) to the shade controllers from a DALI Wallstation or a Low Voltage Wallstation.

The Multi-Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

FLR Fully Luminous Recessed luminaire, with a clear bottom lens for added protection, can be used in a variety of medical / cleanroom, wet location, or high abuse applications. Choose from 3 sizes and a host of lumen packages and color temperatures, to perfectly suit your needs

The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.

The Circadian LED nightlights bring soft, low-level illumination to any environment. Fitting into a standard junction box (single-gang, handy box, 2-inch minimum inside width) for easy installation, the Circadian Series offers up to 30 lumens of illumination. Specify the thru-wall junction box to use two night lights on opposing sides of the wall with one junction box.

MRI 4" and 6" aperture round downlight, perfect for your MRI suite. Non-ferrous construction, remote drivers and driver enclosures, and MRI filters to complete the job. 4" downlight to 2500 lumens and the 6" downlight delivers up to 4000 lumens. Available 1% dimming, dim to off, and DALI drivers are available. IP65 rated for ingress protection and NSF for easy cleaning and wipe-down

The VRVT1 series is the contractor go to complex environment luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumens. The VRVT1 is available in 4' and 8' sizes, performance up to 11,500 lumens with emergency back-up and sensor options. VRVT1 boasts an IK10 rated lens and housing sealed with Torx head tamper-resistant screws for added protection.

FailSafe ArcMed Sealed InDepth allows for the use of the stylish InDepth luminaire in complex environments such as behavioral health, sterile environments, healthcare, food service/processing/prep, and general wet location environments. Sealed clear bottom lens provides physical protection and also provides dust and water ingress protection.

The Fail-Safe FCZ is a sealed, IP65 rated center basket troffer with high performance, visual comfort and aesthetics. Offered in three different sizes, multiple lumen packages, and optional polycarbonate lenses, the FCZ is an excellent choice for a wide range of applications including vandal-resistant, behavioral health, medical, cleanroom, and hose down.

The 15" Terrapin LED provides exceptional aesthetics with impressive strength and is available in 20, 30 or 40 watt lumen packages. Polycarbonate lens, clear or opal, combined with four face plates provides a choice of different styles. Choose a photocell or motion sensor for control. Select an emergency battery pack to provide egress illumination.

The Fail-Safe EXL offers buyers one of the best high-abuse, specification-grade exit signs on the market. Its architectural low profile combines 14-gauge steel and a 1/8-inch polycarbonate lens to withstand the toughest environments. The door attaches to the housing with four tamper-resistant fasteners. LEDs power the unit for energy-efficient, even illumination. These fixtures are UL/cUL listed for damp locations. The EXL is specifically designed for use in public access areas where safety and security are critical; it is ideal for use in maximum security correctional facilities, public housing, schools, psychiatric wards, detention centers, military barracks, parks, and hospitals.

A sealed recessed Encounter luminaire is accomplished by precisely adhering a clear lens to the fixture bottom. Wet location under covered ceiling standard. Choose from a variety of clear lenses - acrylic or polycarbonate. IP66 standard, NSF listed, Class 100 rated (ENC)

The UCL and UCLV provide effective LED task lighting in many environments. Steel, stainless steel or aluminum construction for years of trouble-free operation. 1', 2', 3', or 4' length for use in a variety of confined spaces. UCL utilizes solid front design with lift-and-shift lens. UCLV, with its solid front design, incorporates a captive lens with 4 screws to secure the cover to the housing.

The Fail-Safe SSB/SPC represents security wiring device hardware for institutional applications. These devices are designed for vandal-resistant applications. When used with pick-proof chalking, the finished installation provides an effective and safe means of protection against vandalism by occupants and against the facility property. Manufactured for use in steel wall, concrete block or poured wall construction, the SSB/SPC prevents costly replacement of essential electrical devices.

The Fail-Safe FCT LED combines maximum security construction features with energy saving technology. This low profile surface mounted luminaire has a clamshell housing, security lensing and tamper-resistant fasteners to maximize impact-resistance and prevent contraband concealment and unauthorized fixture penetration. The fixture can be ceiling or wall-mounted. An emergency battery pack is available as an option. It is UL/CUL listed for damp locations.

The 11" Terrapin LED provides exceptional aesthetics with impressive strength and is available in 10, 15, 20, and 25 watt lumen packages. Polycarbonate lens, clear or opal, combined with four face plates provides a choice of different styles. Choose a photocell or motion sensor for control. Select an emergency battery pack to provide egress illumination.

6 inch LED recessed downlight designed for operating room applications. Featuring a two-stage reflector with excellent light control and low aperture brightness. Lumen packages up to 7000 lumens with color temperatures of 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology, the 3000K LED warms smoothly as dimmed to 1850K, creating a warm glow within the space. IP66 compliant standard, NSF and MILSTD461G available.

Fail-Safe's CLM surface and recessed sealed enclosure luminaire is available with overlapping and inset doors. Available in 1x2, 1x4, 2x2, and 2x4 sizes, the CLM is Class 100 rated, ISO Class 5-8, IP65 compliant, and NSF rated.

Fail-Safe HVSL4 combines beauty and robustness in a small scale design. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. Ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, mental health facilities, hospitals, corridors, dormitories, public rest rooms, common areas, and transit stations