160 manufacturers · 18,987 products

Mechanically Latching Relay, 20 Amp SPST + True Override Switch, 24 Vac/dc Coil Input, Status LED and Auxiliary Output

Closet Light Controller, 10 Amp SPST, Class 2 Dry Contact Input, 120-277 Vac Power, 15-Minute Time Out Setting

Closet Light Controller, 10 Amp SPST, Class 2 Dry Contact Input, 120-277 Vac Power

Closet Light Controller, 5 Amp SPST, Class 2 Magnetic Door Switch Input, 120 Vac Power

NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM communication. The device is plug and play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports. NX DMX supports ONYX on PC systems for up to four Universes without any dedicated license. When connected to an ONYX licensed PC or ONYX console the NX DMX is assignable to any one of 255 Universes. NX DMX allows for the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX' outstanding library support.

The new SDC12 features 12 DMX channels, DIP switches to set a starting DMX channel, a master dimmer fader, on/off switch, 3pin and 5pin XLR output, and operates via an external 12VDC power supply (included) or a 9VDC battery (not included).

NX Wing is the complementary USB control surface to Obsidian Control Systems ONYX platform. Based on the NX 2 console the NX Wing utilizes the same rugged design and components with an identical footprint and layout. Through its USB connection the NX Wing provides a responsive, professional hardware surface to operate ONYX on any PC system without compromises. Any user of ONYX will feel instantly familiar with the NX Wing and no setup or additional installation is required. Simply plug it into a user-provided PC with ONYX and get started instantly. NX Wing provides extensive connectivity with 4 DMX Ports, MIDI and Timecode ports while unlocking 64 Universes of control when connected to ONYX on a PC.

The NX2 is the ultimate compact yet powerful fully integrated lighting controller. As a member of the innovative ONYX platform from Obsidian Control Systems the NX2 is feature rich and never restricted inits capabilities. NX2 includes a high-brightness full HD multi-touch screen; 8 assignable parameter encoders;an assistive mini touch-screen; full keypad and command section; a dedicated grandmaster and 10 full playbacks with four freely assignable buttons. Utilizing the latest in industrial components the NX2 contains a powerful new Intel Hexa-Core processor, high speed NVMe SSD drive and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor. The NX2 is ergonomic with its compact footprint, full ONYX command and keypad section and the bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moments notice. With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 2 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at anytime. For powerful visualization of lighting and scenery every NX2 console includes a free CAPTURE Solo Edition license. Register your NX2 at http://obsidiancontrol.com/getcapture

The NX4 is a comprehensive feature packed control surface. With a well-arranged combination of motorized and manual faders as well as an array of playback button the NX4 offers 44 total playbacks in a compact yet extremely powerful package. As a member of the innovative ONYX platform from Obsidian Control Systems the NX4 is feature rich and never restricted in its capabilities. NX4 includes a high-brightness full HD multi-touch screen; 8 assignable parameter encoders; dedicated Intensity encoder; an assistive mini touch-screen; full keypad and command section and a dedicated grand master. Two independent playback sections offer instant access. The main playback with 10 motorized faders plus 10 play-pairs allows for quick page changes while the sub playback with 12 faders and 12 button playbacks allows important cues to always be at the user’s fingertips. Utilizing the latest in industrial components the NX4 contains a powerful new Intel Hexa-Core processor, high speed NVMe SSD drive and 16GB of DDR4 RAM. Fast boot times, instant operation and the ability to process 64 Universes right inside the console without the need for costly external processing networks result in unprecedented power in this form factor.The NX4 is ergonomic with its motorized playback faders, short depth, easy screen access, full ONYX command and keypad section and bright adjustable HD touch screen. It is always ready to run the largest shows and events at a moment’s notice. With four DMX ports, Timecode, Midi and dual Gigabit ports for up to 64 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX4 has all the connectivity and power the ever-increasing sizes of shows demand. Two additional 4K touch monitors are supported for even more direct access at any time. For powerful visualization of lighting and scenery every NX4 console includes a free CAPTURE Duet Edition license. Register your NX4 at http://obsidiancontrol.com/getcapture

The NXK is a small USB powered control surface for ONYX. The ideal companion for the NX1 console and ONYX PC systems, it replicates the full keypad and command section of larger consoles. Four encoders complete the programming experience for fast and direct parameter access. A simple magnetic alignment system allows attachment on either side of the NX1 console or NXP motorized fader wing. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.

The NX P is a motorized fader wing for ONYX. The ideal expansion for the NX1 console and ONYX PC systems, it replicates the full playback section of the NX1 console. Four integrated DMX ports provide instant connectivity to the lighting system. Multiple NX P wings can be connected to any ONYX console or PC system, expanding direct access with 20 playbacks at a time. The flexible button array can be mapped to playback control or powerful function keys. The NX P replicates the layout and all functionality of the NX1 and NX4 console surfaces so all operation is seamless and intuitive. A simple magnetic alignment system allows attachment on any side of the NX1 console or NX K command pad. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.

The NX1 is the essential lighting controller in the innovative and powerful ONYX platform. Fully featured and unrestricted if offers the complete ONYX experience without compromises in an ultra-compact package. Utilizing the full ONYX Operating System the NX1 includes a high-brightness 10.1" HD multi-touch screen; 4 assignable parameter encoders; 10 full motorized playbacks with four freely assignable buttons plus and extra playback and function key hybrid array. A dedicated Master Go section rounds out the efficient front panel design. Including the latest in industrial components the NX1 contains a powerful new Intel processor, high speed NVMe SSD drive and 8GB of DDR4 RAM, allowing fast boot times, instant operation and the ability to process 8 Universes right inside the console. With four DMX ports, a Gigabit network port for up to 8 Universes of Art-Net, sACN plus the ONYX X-Net protocol the NX 1 has ample connectivity and power for a wide variety of shows and applications. One additional touch monitor is supported for even more direct access at anytime. The NX1 is further expandable with the dedicated NXK keypad and the NXP motorized playback wing. A simple magnetic alignment system allows attachment on either side of the NX1. The keypad and playback wing are part of the ONYX platform and can be utilized with all other NX devices or ONYX on any PC system.

More compact and more competitive than its predecessor Nano! Coupled with Hog 4 PC™, the new Hoglet 4™ provides the user with a single unified surface, turning a laptop or desktop into a fully-fledged, powerful and intuitive lighting console. Any computer running Hog 4 PC™ can connect to the Hoglet 4™ over USB creating a state of the art control surface. Utilizing a similar front panel to all Hog 4™ products users will feel right at home. The main play column has also been moved back to the more traditional center of the wing.

The Miniwing 4™, with its ultra-compact and sleek styling is equally at home next to a console or as part of a standalone Hog 4 PC system. It provides 10 additional faders, for the Hog 4, Full Boar 4, Road Hog 4, and Hog 4 PC software. It uses the same high quality controls as found in the Hog 4 range of consoles, ensuring responsive and reliable operation. One Hog LED desk light is supplied, fully dimmable and software controllable.

The RDMX6S™ is an easy-to-use RDM E1.20 compliant 6-way RDM/DMX data splitter featuring a 5pin DMX input, a 5pin DMX loop thru output with built-in termination, and (6) opto-isolated 5pin DMX outputs. Housed in a die-cast aluminum housing, it features a multi-voltage universal auto switching power supply (100-240v), and includes a single unit mounting bracket for truss/clamp installation. Optional single and dual unit rack mount kits are available.

Tempo’s proprietary Dimming Interface Module converts a 4-wire input with 0-10V dimming signal to a 2-wire Electronic Low Voltage (ELV) output to control luminaires with ELV drivers. DIM-Z features a micro-processor based controller that monitors and initiates all signals and functions. An LED light indicator on the housing reports power on/off and self-diagnostic faults. One DIM-Z is required per run up to a maximum 600W (120V) or 1350W (277V).

WallStation 120-230VAC Input in White

Low Voltage Wiring Box with On-Off Switch

Wireless DMX LED Controller 24VDC Input

Wall Mounted Class 2 24VDC/96W Dimmer and Driver

Delivered Lumens: Up to 9009lm CCT: 2700K/3000K/3500K/4000K CRI: 90 Power: 26W, 50W, 79W, 132W, 184W Input: 120-277V, 50/60Hz ELV Dimming: 100-10% 0-10V Dimming: 100-10% TRIAC Dimming: 100-10% Rated Life: 50000 Hours Construction: Aluminum hardware Thin,adjustable powered aircraft cables for an ultra-clean look May be mounted on a sloped ceiling Built in color temperature adjustability. Switch from 2700K/3000K/3500K/4000K Option to pre-select color temperature or adjust in the field

Flex Graze HO SC™ fixtures provide the perfect fit wherever your world refuses to lie flat. Unlike most linear fixtures, which are strictly limited to bend only along one axis, Flex Graze HO SC can achieve both horizontal and vertical bends to precisely match complex profiles. Flex Graze HO SC fixtures also benefit from an industry-leading. ten year limited warranty to ensure complete confidence. A range of driver options are available to allow control via DMX, 0-10V or DALI. Alternatively, Flex Graze HO SC runs can also be integrated directly into mains-level dimming systems using our reverse/forward phase MLE dimmer drivers.

The SoliDrive Series of Constant Voltage Class 2 LED Drivers from Magnitude Lighting are UL Listed and feature a built-in junction box on both the input and output. These drivers are IP65 rated and are suitable for both indoor and outdoor installations. With universal input voltage ranging from 120 to 277VAC, the SoliDrive series of drivers are designed for commercial, industrial and residential applications. Our 0-10V dimming delivers smooth flicker-free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers. Class 2 electronic dimming Connect a compatible 0-10V dimmer and 100-277VAC to dim LED products down to 1% Low profile Super compact aluminum enclosure for easy placement Ready for the elements IP65 enclosure for outdoor use

The SoliDrive Series of Constant Voltage Class 2 LED Drivers from Magnitude Lighting are UL Listed and feature a built-in junction box on both the input and output. These drivers are IP65 rated and are suitable for both indoor and outdoor installations. With universal input voltage ranging from 120 to 277VAC, the SoliDrive series of drivers are designed for commercial, industrial and residential applications. Our 0-10V dimming delivers smooth flicker-free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers.Class 2 electronic dimming Connect a compatible 0-10V dimmer and 100-277VAC to dim LED products down to 1% Low profile Super compact aluminum enclosure for easy placement Ready for the elements IP65 enclosure for outdoor use

TheDDC 1 ACis a two-way DALI to DMX converter. It features one DALI input and one DMX output, allowing conversion of up to 64 channels of DALI into DMX-512 signal. Via an internal dip switch, you can reverse the path, making it DMX input to DALI output. Switch it up Convert DMX to DALI or DALI to DMX for maximum control flexibility Easy to configure Adjust settings via the onboard dip switches or remotely via RDM AC Input No external power supplies required with a 100-240VAC direct input

AL Fade 6 Prois a simple, fader based wall-mount DMX controller designed for single color or multi-color LED lighting products. It features a six-channel DMX output, six user-programmable presets (static color or moving sequence), and a master dimmer function. An IR remote control is included for wireless control up to 30’.Get in touch A simple slider interface makes for an easy to use wall mount DMX controller Set your level Control white or multicolor DMX fixtures and dim from 0-100% The Master Use the master fader to instantly override your programs

ILC has been designing custom switch stationsfor over 30 yearsto complement our lighting controlsystems. We can design switch plates from smallsingle gang controlstations, to large facility floor plan layouts on a slanted enclosure. The design optionsfor materials, switches,status LEDs, graphics, and mounting are virtually limitless. Switch stations can be designed with a hinged locking door that allowsforstatus viewing but limits access only to those with the key

The Intelligent Lighting Controls line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the ILC family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

2R seriesrelays are designed to be the longest lasting, most reliable relays available. By incorporating a unique single moving contact, both endurance and reliability are significantly enhanced. These relays have been tested to handle 200,000 full load cycles and 1,000,000 no load cycles. They have two high quality nickel-silver contactsthat can handle today’s high-inrush loads. Relays are available with or without status contacts and are available with variousinterface connectors.

The ILC TR relay provides a unique solution for remote control and panel mount control applications. Because each relay hasits own internal powersupply, it can be mounted virtually anywhere without additional transformers or powersupplies. By incorporating a unique single moving dual contact design, both endurance and reliability are significantly enhanced. TR relays are magnetically latched, requiring only a momentary rectified pulse to open or close the contacts. Isolated pilot contacts are available for indication of relay status at the switch stations. Available TR-Retro relays automatically turn on upon power-up and require a momentary closure to turn the relay on and off.

The ILC Remote 20 (R20) and Remote 20 Dimming (R20D) relays are designed to be mounted at the power junction box or lighting fixture for direct control of the lighting load. Relays are controlled from the EVO panel using a standard CAT-5 cable connection to the R20 relay RJ-45 jack. The R20 series relay uses oversized contacts designed to handle LED inrush current. Tested at 16 Amps electronic driver that can commonly exceed 200% of running current of the R20D latching relay load. The R20D has galvanically isolated 0-10V dimming which allows for class 1 wiring of the low voltage dimming. Loss of power to the LLEVO panel will force dimmer output level to 100%.

The EVO Lite power pack operates one load of lighting or plug load. This power pack includes 12 configuration options, an on-board relay, and 0-10V dimming, integrated into one package for easy installation. The EVO Lite power pack is ideal for small offices or classrooms, made to meet energy code with daylight harvesting, plug load control, occupancy sensing, and vacancy sensing options. It has two RJ-45 ports: one to wire to switches and additional power packs, and another for sensors and additional power packs. This convenient and easy to install power pack can be used as a single device or combined with other EVO Lite power packs, for multi zone operation.

The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.

The EVO Lite G3 Switch is a cost effective, versatile and easy to use hardwired over Cat-5 device. 1 or 2 Zone control with Press-and-Hold Ramp-Up/Ramp-Down dimming from the EVO Lite Power Pack.

The LightSync G3 data line switch station is a modern, versatile and easy to use digital switch station. The G3 can pre-configured as a Multizone-Dimmer, Scene Switch, or a Non-Dim switch station. These will be configured for 1 to 7 buttons for standard load control, 1 to 6 buttons with dimming buttons for raise/lower or press and hold ramp-up/ramp-down operation that can be configured to dim all, or set of the dimmer outputs controlled. Buttons can be assigned to operate single relays, groups of relays, used for On or Off only operation, activating a relay preset or dimming scene. LED Status indicators for relays on, off, preset, or group state. MZD stations give the operator multi-zone and individual zone adjustment in a single station. LED status indicators for relays on, off, preset, or group state, when an individual zone is selected for dimming the LED will flash for that zone button. Button faces can be changed in the field for color or configuration, and the internal operation can be selected by placing the device in program mode locally, over the LightSync data bus using the diagnostic tool or from the LL-Pro programming software.

Intelligent Lighting Controls wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors, photocells, and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections.

The LightSync EVO Room Controller is a distributed lighting panel that simplifies expansion of a LLEVO or any LightLEEDer panel. The LSEVO-RC supports up to four R20D relays, two photo sensors, and two 6-button G3 switches. Easily connect R20D relays with CAT-5 to control lighting loads, 0-10V dimming, or receptacles. Programming can be easily modified using the ILC Pro Bluetooth app or LightLEEDer Pro software.

Momentary Switch Stations are available from ILC in a Decora or toggle style form. These heavy duty switches have a momentary On/Off with a neutral center position. The switches are manufactured by Leviton®, Hubbell®, or Pass & Seymour® and acceptstandard switch plates. Switches can be wired to signal an input to control a relay(s), group(s), or preset(s) in any of ILC’s panels.

The LightLEEDer programmable lighting control relay panel is the key to a powerful, dependable, flexible and energy efficient lighting system. LightLEEDer panels come with our new Reliant40 relays which feature a superior four contact design—the first true 40Amp lighting relay. Reliant40 relays come in 1-, 2- and 3-pole configurations in a robust breaker-style body. LightLEEDer panels range in size from 4 to 64 relay capacity and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-on modules are available for connecting to BAS, theatrical, or security systems.

The ILC Remote 20 Amp, Emergency Bypass Relay combines normal relay operation with a UL 924 bypass relay in one convenient package. Relays are available in both a wired (R20D-EM) and wireless (WR20D-EM) version that uses the 915MHz radio frequency for communication to ILC wireless devices. When normal power is lost the EM relay will automatically force ON the EM load and send dimming to 100%. When normal power is restored the device will return to normal control. The R20D-EM and WR20D-EM have a relay test button, and a wired input that can be used for a remote test switch or as an override connection from a fire alarm system.

The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

The hinged locking doorswitch station provides a secure enclosure for yourswitch stations by limits accessto those who possessthe key. Each station allowsfor installation of LightSync data line switches along with any other low-voltage switch that fitsin a standard electricalswitch box. Custom switch configurations are also available, designed by ILC for yourspecific project. Switch stations are provided in a 1, 2-, 4-, or 8-gang configuration.

The LightSync Occupancy Sensor 8 Input module is designed to power and receive signals from multiple sensors on each of its 8 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the inputs. This module mounts remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network.

The Aurevo Motus is a discreet sensor that allows the monitoring/triggering of smart room devices based on user-defined programming.

The Aurevo Scene Control is a compact control center that allows users to program and activate customized scenes for Aurevo devices using 4-6 programmable buttons.

The Aurevo Outlet is an intelligent power outlet that enables remote control via the Aurevo Switch, wall station, or central control systems like Aurevo Core or Aurevo Scene Control.

The Aurevo Core is a configurable master control panel that provides centralized management of smart control devices, allowing customized control access and device integration.

The Aurevo Switch is a user-configurable smart switch that enables seamless control of one or more Aurevo Outlet(s) via a wall interface or central control station (Aurevo Core or Aurevo Scene Control).

The Aurevo Dim is a smart wall station that enables precise dimming control of selected light fixtures via a wall interface or integration with the Aurevo Core or Aurevo Scene Control central control systems.

The Aurevo Climate is a room heat/cool control device that enables precise climate control via a wall station or the Aurevo Core system.

The Boca Lighting and Controls SMART Dimmer DALI provides an interface with a dimming protocol of standard DALI show control.

The Boca Lighting and Controls WA5 enables you to send and receive DMX512 data over a 500m radius to power and control fixtures from a single location with its 16dbi directional antenna.

The Boca Lighting and Controls SMART Dimmer DMX provides an interface with a DMX512 dimming protocol and uses Micro-Step technology for high-resolution dimming.

The Boca Lighting and Controls SMART Dimmer 0-10V provides an interface with a dimming protocol of 0-10 volts.

The Boca Lighting and Controls NanoRouter-X provides a DMX interface to 4 independent DMX or analog fixture streams on the network.

The Boca Lighting and Controls PDMX-C provides a Wireless DMX Diagnostic, troubleshooting, and control solution to any Boca fixture DMX networked installation.

The acronym DMX stands for Digital Multiplex. DMX devices are the industry standard for remotely controlling smart light fixtures and other devices.

Remote 277V 300W Class II Magnetic Transformer. Up to 6x50W connections, dimmable with any incandescent dimmer. 15′ wire max. each.

Remote 120V 300W Class II Magnetic Transformer. Up to 6x50W connections, dimmable with any incandescent dimmer. 15′ wire max. each.

4 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.