Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
248 products
BrandAll▾
SortRelevance▾
• Available in 4’ and 8’ individual fixtures • Three standard lumen packages • Efficacy up to 145 lm/W • Soft diffuse direct lighting • Finishes available in clear or black anodize • Custom powder coat colors available upon request* • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • CA Title 24 / JA8 installation compatible
• Proprietary linking design for straight rows • Continuous row configurations available up to 410’ at 277V, and 177’ at 120V • Plug-and-play installation • Three standard lumen packages • Efficacy up to 145 lm/W • Soft diffuse direct lighting • Finishes available in clear or black anodize • Custom powder coat colors available upon request • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • CA Title 24 / JA8 installation compatible
• Tight optical control from beam shaping optics • Regressed light source to minimize glare • Extruded aluminum single piece housing • 2’, 4’, 6’ and 8’ individual units, or continuous rows • Straight runs with proprietary joiner design • Direct and Indirect light levels can be set to any combination at the factory • Efficacy up to 142 lm/W • Textured powder coat finishes available in white, black and silver • Driver removable from top side of fixture • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible
• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible
• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible
• Seamless glare eliminating shade • UGR < 19 • Extruded aluminum single piece housing • 2’, 4’, 6’ and 8’ individual units, or continuous rows • Linear runs with proprietary joiner design • Direct and Indirect light levels can be set to any combination at the factory • Efficacy up to 137lm/W • Textured powder coat finishes available in white, black, and silver • Premium finishes also available • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible
• Continuous lensing standard– runs up to 200’ • Extruded aluminum single piece housing • 2’, 4’, 6’ and 8’ individual units, or continuous rows • Linear runs with proprietary joiner design • Direct & Indirect light levels can be set to any combination at the factory • Efficacy up to 140 lm/W • Soft diffuse direct lighting • Textured powder coat finishes available in white, black and silver • Premium finishes also available • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible
• Continuous lensing standard– runs up to 200’ • Extruded aluminum single piece housing • 2’, 4’, 6’ and 8’ individual units, or continuous rows • Linear runs with proprietary joiner design • Direct & Indirect light levels can be set to any combination at the factory • Efficacy up to 140 lm/W • Soft diffuse direct lighting • Textured powder coat finishes available in white, black, and silver • Premium finishes also available • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible
Customizable extruded faceplates Continuous lens option available – up to 200’ 4’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current
The low profile HARRIS LSCS1 delivers energy savings and reduced maintenance costs when replacing up to 400W HID fixtures.
Introducing our revolutionary iFrame LED System, the pinnacle of lighting innovation. Available in 2'x2' and 2'x4' sizes, this cutting-edge system features 3CCT selectable color temperatures and a 3-power selector, offering unparalleled versatility. Choose between vibrant RGB, RGBW, or advanced Pixel RGB configurations to create the perfect ambiance for any setting. Operating efficiently within 120-277V or 220-347V ranges, the iFrame LED System boasts a minimalistic modular design, ensuring lower shipping costs and effortless installation. Designed for cost-effective labor, it promises both ease and efficiency, making it the ideal lighting solution for modern environments.
Discern embodies a deliberate, low-glare control system, featuring dual-level optical control for exceptional visual comfort through both indirect and direct lighting distributions, all with a built-in programmer. It offers versatility with available lengths of 2′, 3′, 4′ and 8′, and supports continuous runs, providing a wide range of independently controllable direct/indirect distribution options. Discern is designed to significantly enhance the user experience while maintaining top-notch energy efficiency.
The LR-HCO-v2 is a ruggedized LED wall pack designed for demanding applications. Featuring a highly corrosion resistant coated aluminium housing with shatterproof polycarbonate lenses and optional wire guard, the HCO-v2 is suitable for applications with vandalism concerns such as tunnels and walk ways. Available from 45W - 150W with max 21,000lm output. The HCO-v2 can be mounted directly to a junction box or surface with conduit entry on all four sides.
The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.
The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.
The CORE Lighting Application (TRX-LGT250) is an intuitive, web-based application that allows facility managers to remotely perform high-level lighting supervisory management tasks, with the power to configure and monitor their WaveLinx connected lighting system. CORE Lighting is hosted on CORE Core (Pro, Enterprise and Virtual) appliances.
The WaveLinx Wired Occupancy Ceiling Sensor - Multi Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.
CORE BACnet/IP (TRX-BACNET) Interface enables the integration of the WaveLinx Connected Lighting System with BACnet-compatible Building Automation Systems (BAS). BACnet is a data communication protocol for building automation and control networks developed by the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE).
The WaveLinx Wired Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.
The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.
The WaveLinx Wired External Network Aux Power Supply (EXPS-15V) is a system accessory for the WaveLinx Wired Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed. If there are more than 10 wall stations and/or cable runs are greater than 1,000 feet, an External Power Supply is to be used. Each External Power Supply is capable of extending the cable run an additional 1,000 feet, or 10 wall stations.
The WaveLinx Wired DIN Rail System Integrator (SI-2-D-NA) converter for interfacing with third-party devices to and from the WaveLinx Wired network. The SI-2-D enables control of a wide range of equipments and systems such as: audio systems, TVs, projectors, shades, security & fire alarms systems and Building Management Systems.
The WaveLinx Wired Touchscreen Interface (TSI-1-NA) is a module which allows the TSE Touchscreen to connect to the WaveLinx Wired Panel system. With it's integrated timeclock, it can also be used a standalone device to run schedules. The TSI-1 must be installed in a DIN rail enclosure.
The WaveLinx Wired Network Communication Cable (LCCP / LCCNP) is used to interconnect Source Controllers and peripheral devices. The cable provides one 18AWG wire pair to deliver power to peripherals and one 22AWG twisted and shielded wire pair to carry data transmissions. Both non-plenum (LCCNP) and plenum rated (LCCP) versions are available.
CORE Public REST API (TRX-API) provides a secure programming interface that enables third-party partners to obtain real-time data from WaveLinx controlled spaces as well as Cooper Lighting Solutions BLE tags. Partners can then use the data to offer value-added solutions that improve business processes and tenant experiences. The CORE Public API interface is hosted on the CORE Core appliances.
The WaveLinx Wired iCANnet to PC Interface (SW-3-NA) provides an interface between an WaveLinx Wired network and a computer running WaveLinx Wired configuration software. This compact versatile unit can be mounted virtually anywhere. The SW-3 includes a PC-NODE, Network Connection Card, phone style connection cable.
The WaveLinx Wired Universal Interface Module - Mini (UIM-NA) is a network powered universal interface with six configurable inputs. It can be dry contact closure for scene selection. 1.7" diameter potted PCB with 8" flying leads, designed to fit standard junction boxes and ideal for connection to push buttons, dry contact switches and rocker switches. Does not include LED feedback status indicators.
The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.
The WaveLinx Wired Lighting Control Network Jack (LCNJ) is a system accessory to the WaveLinx Wired Lighting Control System. This device allows access to the WaveLinx Wired network while in the space where the lighting levels are being modified. It is preferred to be in the space being modified when setting and saving light levels to create different moods/atmospheres.
The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.