160 manufacturers · 18,987 products

Voss /S

Fall /S

Ceiling lamp featuring a non-flammable textile diffuser, light-up body and four tension springs, with their respective supports. The textile diffuser can be machine washed and ironed without losing its features. The combination of various textile diffusers allows for multiple arrangements. Available in white or natural white.The Veroca comes in four sizes, all available with fluorescent or LED bulbs. With regards to their systems, the G13 fluorescent version is sold in conventional, electronic or dimmable-electronic versions; the G5 and 2G11 fluorescent versions, in electronic or dimmable; and the LED version features an electronic-dimmable system.

The SENSORWORX Emergency Power Control device provides a simple method of converting standard light fixtures into emergency light fixures for a UL924 compliant emergency application. Designed by LVS Controls, the SWX-EPC-2 family ensures compliance with both life safety and energy codes and eliminates the wasted energy that is used when emergency lighting is kept on 24 hours a day. These devices are typically ceiling or wall mounted in a junction box with a single gang plaster ring and are usually located in the area where the emergency fixtures are installed.

The SENSORWORX Emergency Power Control device provides a simple method of converting standard light fixtures into emergency light fixtures for a UL924 compliant emergency application. The SWX-EPC-A-2 family ensures compliance with both life safety and energy codes and eliminates the wasted energy that is used when emergency lighting is kept on 24 hours a day. These devices have both ears and a chase nipple, allowing them to be mounted in a variety of places as needed.

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

SENSORWORX line voltage wide view and hallway occupancy sensors are self-contained lighting control solutions that mount to the wall, corner, or ceiling. Using an adjustable angled bracket and multi-position chase nipple, these sensors reduce contractor installation time and provide a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

The SENSORWORX line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX wireless wall switch load controller links to remote occupancy sensors and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The RETROL is a complete retro-solution to convert an older fixture from fluorescent bulbs to a more ecient and flexible LED setup. These kits will be designed for a quick installation. This is your most cost-ecient upgrade path. With your input we can design a solution for almost any existing fixture.

Introducing our new LDE... the newest and most intelligently designed drip edge luminaire on the market. This is the ultimate combination of lighting and water protection for use over doorways. This design features curved contours that are both modern and highly appealing. Available in multiple lengths to match a given door opening. The LDE is as versatile as it is attractive. Constructed from seam-welded extruded aluminum and aluminum cast end caps. Our quick-mount system facilitates installation and maintenance.

The XDL4RWL is a recessed wet location LED linear fixture, design with quality craftsmanship. Engineered for quick and easy tool-less installation. The XDL series provides clean lines, smooth continuous runs, and tight lens fitment. Available in continuous runs and custom angles and lengths.

The LPT8 Series is a T8 Low-Profile Knockdown Fluorescent Strip available in 1' through 8' body lengths. It was designed for surface or suspended mounting applications.

The LPT5 Series is a T5 Low-Profile Knockdown Fluorescent Strip available in 2’ thru 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.

The CS Series is a Commercial Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications.. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for the fixture of this nature.

The 2ST Series is a 2 Lamp Staggered Fluorescent Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for our 2ST. The staggered lamp concept allows for a continuous row of illumination when ran end to end to eliminate dark spots in signs, and continuous run applications, such as cove lighting.

The 2ST Series is a 2 Lamp Staggered Fluorescent Strip available in 2’ through 8’ body lengths. It was designed for surface or suspended mounting applications. Outdoor facilities, high rise garages, building exteriors, educational facilities, recreational facilities, and other intensive use environments are the perfect types of environments for our 2ST. The staggered lamp concept allows for a continuous row of illumination when ran end to end to eliminate dark spots in signs, and continuous run applications, such as cove lighting

A range of small, square and rectangular wall mounted luminaires with options of upward or downward light distributions. Ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLWM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires. This luminaire is available in 2 different sizes and in combinations of down, up or up/down light distributions. The CLWM have a decorative spike option for added lighting effects. The CLWM mounts over a 2”x4” switchbox mounted horizontally. Added securing holes are provided to secure the luminaire to the wall surface. Frosted or clear lenses are available

A range of small, square and rectangular surface mounted luminaires with options ideal to illuminate the wall and surfaces in front of wall and for light accents on vertical surfaces using high efficiency LED’s. The CLCM is designed for indoor and outdoor applications and provides a clean, visually appealing solution for small, unobtrusive wall mounted luminaires.

The 502AE is a stylish choice for any outdoor space. This fixture is available LED and its industrial strength features make it ETL listed and suitable for wet locations. Two lenses on top and bottom of fixture provide uplight and downlight. Advantage's 502AE is designed for wall applications and mounting hardware is included.

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

Available in LED, Incandescent & GU24 Molded of Durable Non-Corrosive UV Resistant Resins Fits Most 3" Diameter Posts UL Listed for Wet Locations

The MWV07 Series is a Wall/Vanity LED Luminaire with a smooth white acrylic diffuser.

The MWV13 Series is an LED Wall/Vanity fixture that was designed to be stylish and functional. It is available with multiple lens and finish options, with options for direct, indirect, front light, and direct/indirect.

The MER LED wall mount medical grade luminaire is the perfect solution for the need of durable, aesthetically pleasing, high efficiency light fixtures. The MER utilizes a one piece housing design with your choice of lens. AntiMicrobial paint optional.

The LOBDID is a stylish Direct/Indirect Over-Bed Luminaire available in 2', 3' and 4' lengths. Various customization options allow this versatile fixture to fit into any design. Direct only option features a stylish closed-top design to prevent unwanted uplight.

The MEK Series is a Slotted LED Wall Mount Linear Fixture and is a classically styled fixture fit for any interior. It is available in stand alone or continuous run application minimum of 4' increments. Driven by performance and a clean aesthetic, the MEK series represents the ultimate in simplicity; a narrow, uniform line of light. Constructed with premium materials with industry leading technology, the MEK Series is available in configurable runs. The MEK Series integrates seamlessly with today’s modern building management systems. With virtually unlimited applications, the MEK Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.

The MEL LED wall mount is a durable direct/indirect medical grade fixture. The MEL utilizes one piece clamshell housing with various lens options to provide for a stylish and efficient medical fixture. Utilizing the latest in LED technology, the MEL was engineered to be a durable, long lasting, high efficiency medical grade fixture. Ideal for use in any healthcare facility area.

The WCL Series is a 13” Wrap wired for LED tubes available in 4' and 8’ body lengths. It is a low-profile, 4 lamp wrap that was designed for surface mounting applications.

The LWD Series is a 11” LED Wrap available in 2', 4' and 8' length. It is a low-profile, narrow wrap that is designed for surface mounting applications. The LWD utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The MLVT Series is a Commercial Grade LED Vapor Tight, gasketed enclosure that is completely dust and moisture resistant. The MLVT utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry

The LWW Series is a 16” LED Wrap available in 4’ body length. It is a low-profile,wrap that is designed for surface mounting applications. The LWW utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The LWLP Series is a 16” LED Puff Wrap available in 4’ body length. It is a lowprofile, wrap that is designed for surface mounting applications. The LWLP utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The LWB Series is a 9” LED Wrap available in 2' and 4' body lengths. It is a low-profile, narrow LED wrap that was designed for surface mounting applications.

The LVTP Series is a Commercial Grade LED Vapor Tight, gasketed enclosure that is completely dust and moisture resistant. The LVTP utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry

The BTW is a rugged series of undercabinet luminaries for use in more demanding areas, such as ones with harsh conditions. With a painted, steel housing and polycarbonate lens, and a steel seam-welded cover that fits over the housing, the BTWC provides durability and high performance. Tamper-Proof screws attach the cover to the housing, creating a tough, yet visually appealing fixture.

Available in LED • Powder Coated Cast Aluminum • Wall or Ceiling Mount • Enclosed & Gasketed • ETL Listed for Wet Locations (IP65) • Bug Proof

Available in LED & GU24 Molded of Durable Non-Corrosive UV Resistant Resins with Powder Coated Aluminum Base Wall or Ceiling Mount UL Listed for Wet Locations

The CWL Series is a Wet Location Fluorescent Troffer available in 1x4, 2x2, and 2x4 body sizes. It was designed for recessed, wet location applications. Multiple lensing options are available.

The LSRR Series is a versatile LED Strip, that is fitted with a round frosted lens, designed to modify existing fixtures into a high efficiency LED system. Designed to save time and energy upgrading fixtures, and leading to reduces costs. Available in 4' and 8' lengths.

The unique design of the patent pending FlexMount™ System gives the High Efficay Retrofit series the ability to easily retrofit a majority of fixtures whether it is a vertical or horizontal installation.

UNV DC Engines Retrofit Kits with 0-10V Dimming

Universal DC Engines Retrofit Kits with 0-10V Dimming

The LWV50 Series is an LED Wall/Vanity fixture engineered with modern aesthetics in mind. It is available in 24", 46", and 48" options.

The LWV35 Series is an LED Wall/Vanity fixture available in 1 or 2 lamp configurations. It is available with multiple lens and finish options.

The LWV16 Series is an LED Wall/Vanity fixture available with multiple lens and finish options.

The LWV13 Series is an LED Wall/Vanity fixture with up, down, and front light capability. It is available with multiple lens and finish options

The LWV07 Series is a Wall/Vanity LED Luminaire with a smooth white acrylic diffuser.

Available in Satin Nickel and Bronze finishes, this luminaire beautifully fits into any design concept.

The PLSW is a beautifully designed wrap that is available in continuous runs. With a satin lens in square and razor edge options, the PLSW makes for a simple, yet aggressively styled luminaire. The PLSW emits a beautiful uniform light output and utilizes the latest in LED technology.

The LSRDID Series is an architecturally designed Suspended Mount Direct/Indirect Steel LED Luminaire that is classically styled and fit for any interior. It is available for continuous run mounting.

The LHCL Series is a Half Cylinder Linear LED fixture available for stand-alone or continuous run applications. It is available for continuous run mounting. Driven by performance and a clean aesthetic, the LHCL series represents the ultimate in simplicity; a narrow, uniform line of light. Constructed with premium materials with industry leading technology, the LHCL Series is available in configurable runs. The LHCL Series integrates seamlessly with today’s modern building management systems. With virtually unlimited applications, the LHCL Series allows architects and designers the freedom to experiment with their designs without exceeding ever decreasing energy budgets.

The BAO is a streamlined high abuse fixture with smooth edges and countersunk fasteners. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. The BAOT is a variation of the BAO with smooth edges. The BAO/BAOT is ideal for areas where the need for aesthetics and protection from vandalism are critical. Suited for areas such as: schools, mental health facilities, stairwells, corridors, detention centers, public transportation areas, and prisons

The BAOF is a streamlined high abuse fixture with smooth edges and countersunk fasteners. Steel end caps and steel body provides strength while an extruded opal smooth polycarbonate lens obscures the light and spreads light evenly. The BAOFT is a variation of the BAOF with smooth edges for applications where an anti-ligature fixture is needed. It is ideal for areas where the need for aesthetics and protection from vandalism are critical. Suited for schools, mental health facilities, stairwells, corridors, detention centers, and public transportation areas

The WV37 Series is a Fluorescent Wall/Vanity fixture available in 1 or 2 lamp configurations. It is available with multiple lens and finish options. It is designed for high abuse environments. High abuse environments include wet areas and other damp environments. Additional uses include areas in which lighting from exteriors is extremely limited, for example, public areas, locker rooms, bathrooms, halls, stairwells, corridors, walls and ceilings.

The LWV60 Series is a Wall/Vanity LED Luminaire that offers vandal resistance.

The LHASM Series is a High Abuse LED Surface Mount fixture designed applications that require a fixture with a high level of vandal resistance. High performance linear configured LED module boards.