160 manufacturers · 18,987 products

The BAM Series is a High Abuse LED Surface Mount fixture designed applications that require a fixture with a high level of vandal resistance. High performance linear configured LED module boards.

The LVVT Series is a narrow LED vapor tight, gasketed enclosure that is completely dust and moisture resistant. IP67 rating. The LVVT utilizes stateof-the-art LED technology to deliver a high CRI and high efficacy output.

The BAN LED combines maximum security construction with energy saving technology. The BAN utilizes one piece clamshell housing as well as security lensing and tamper resistant fasteners for impact resistance and prevent contraband concealment and unwanted fixture penetration. The BAN is ideal for confinement/security applications. Suitable for use in inmate cells, psychiatric wards, secure corridors and general population areas

The MEI provides a supplemental, asymmetric/symmetric surface mount lighting solution in the operating room. The MEI is available in 1x4, 2x2, and 2x4 sizes, and it is typically positioned around the perimeter of the operating room. Available with various housing, doorframe, and lens materials to become the ideal fixture for any operating room application.

The LVT Series is a Commercial Grade LED Vapor Tight, gasketed enclosure that is completely dust and moisture resistant. The LVT utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry

The MEBF is a complete lighting solution for the operating room. High transmission and diffusion lens with choice of symmetric, asymmetric/symmetric, and full asymmetric optics to accommodate the lighting needs of surgical suites. Available in 1x4, 2x2, and 2x4 sizes. Typically positioned around the perimeter of the operating room. Available with choice of housing and doorframe materials, anti-microbial paint, and a MIL STD 461G compliant option, the MEBF is the perfect choice in the operating room surgical suite.

The BAL Series is an architecturally designed surface mount LED fixture. It is available for continuous run mounting. The BAL utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry. The BAL is impact resistance and prevents unwanted fixture penetration. Suited for schools, mental health facilities, stairwells, corridors, detention centers, and public transportation areas.

The CLDF is an IP65, Wet location, IC-rated luminaire which provides a cost-effective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The BAI is a prison grade, vandal resistant, ceiling mounted luminaire. Engineered for high abuse areas, the BAI is a durable, sleek, and efficient fixture. The BAI is a perfect combination of strength and aesthetics. An excellent choice for locations such as prisons, stairwells, schools, restrooms, storage facilities, dormitories, hallways, shower facilities, and locker rooms.

The BAIW is a vandal resistant wall mounted luminaire, engineered for high abuse areas. The BAIW is a perfect combination of strength and aesthetics. An excellent choice for locations such as prisons, stairwells, schools, restrooms, storage facilities, dormitories, hallways, shower facilities, and locker rooms.

The CLG LED Covered Strip Luminaire is designed to deliver general, ambient lighting in a variety of settings. The CLG has a high-efficacy, which provides long life and uniform illumination. The versatility of our CLG ensures it is the perfect choice for both new construction and retrofit applications.

The MEQ provides a supplemental healthcare lighting solution. With an aesthetically pleasing design, combined with the latest in LED technology, the MEQ is the perfect luminaire for any healthcare application. The MEQ is available in 2x2, and 2x4 sizes.

The BAH LED combines maximum security construction with energy saving technology. The BAH utilizes one piece clamshell housing as well as security lensing and tamper resistant fasteners for impact resistance and prevent contraband concealment and unwanted fixture penetration. The BAH is ideal for confinement/security applications. Suitable for use in inmate cells,psychiatric wards, secure corridors and general population areas. UL listed for damp locations. Available in continuous runs, use option BAHCR.

The LRCWLis an IP65, IC-rated luminaire which provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The LRCWL is available in 2x2 and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, and 12W emergency driver. Suitable for ISO 5 Cleanrooms. This fixture was designed for healthcare facilities, cleanrooms, and any insulated ceilings.

The MEBFG is a green and white LED operating room fixture. High transmission and diffusion lens with choice of symmetric, asymmetric/symmetric, and full asymmetric optics to accommodate the lighting needs of surgical suites. Green and white or all green LEDs aid in the surgical room. Available in 1x4, 2x2, and 2x4 sizes. Typically positioned around the perimeter of the operating room. Choice of housing and doorframe materials, antimicrobial paint, and a MIL STD 461G compliant option, the MEBFG is the perfect choice in the operating room surgical suite.

The CLDFR is an IP65, Wet location, IC-rated luminaire featuring a combination of 630nm red and white LEDs for vivarium applications. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The BAQ is built from 16 gauge stainless steel post painted electrostatically applied white TGIC polyester powder coat – 5-stage pre-treatment. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes, one 3/4" tapped hole on back of housing, four 3/4" tapped and plugged holes on sides of housing.

The MEB is a complete lighting solution for the operating room. High transmission and diffusion lens with choice of symmetric, asymmetric/symmetric, and full asymmetric optics to accommodate the lighting needs of surgical suites. Available in 1x4, 2x2, and 2x4 sizes. Typically positioned around the perimeter of the operating room. Available with choice of housing and doorframe materials, anti-microbial paint, and a MIL STD 461G compliant option, the MEB is the perfect choice in the operating room surgical suite.

The BAE is a maximum security, prison grade, surface mount luminaire. The BAE can be both ceiling- or wall-mounted. Engineered with a low-profile clamshell housing, while utilizing inner/outer lenses and tamper resistant fasteners for impact resistance and penetration, and to prevent contraband concealment. UL/ cUL listed for damp locations. The BAE is ideal for correctional and high abuse applications, such as inmate cells, psychiatric wards, secure corridors and general population areas. Available with knockouts for continuous runs (option BAECR).

The MEE series is a combination of both ambient and exam light for hospitals, nursing homes and other patient care facilities. The MEE is an ICrated specification-grade luminaire which provides a cost-effective LED patient room lighting solution. Eliminates the need for wall mounted luminaires. Available in 2'x2' and 2'x4' options, the MEE is the perfect healthcare solution for For use in insulated ceilings.

The CLE is a surface mount IC-rated luminaire that provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLE is available in 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, and wet location. MILSTD 461G available, NSF listed, Red and Green LED option available. Suitable for biosafety labs rated BSL 1 and 2. Suitable for Class 1/ISO 3 Cleanrooms. For use in wet locations (optional), insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The BAS LED combines maximum security construction with energy saving technology. The BAS is ideal for confinement/security applications. This surface mount luminaire is perfect for applications such as inmate cells, psychiatric wards, secure corridors and general population areas. UL listed for damp locations.

The fully enclosed MEC offers ambient and/or examination lighting, dimmable to the appropriate lighting levels for either occasions. The small aperture MEC is flush to the ceiling line, allowing quick, easy, as well as effective wipe-down. Separately switched ambient and exam functions provide the ability to accommodate the many necessary activities performed in the patient room. Specify the nightlight as an option for an additional function. Typically used in pairs, and positioned along both sides of the bed, the MEC offers glare and shadow free illumination. Specify the LED reading and/or chart light for an additional function in the patient room.

The MEO LED features innovative optical technology which provides powerful, focused illumination for examinations. Its exemplary design provides excellent vertical illumination as well as glare-free illumination for both the medical professional and patient.

The MET provides a supplemental lighting solution for Behavioral Healthcare facilities. MET is available in 1x4, 2x2, and 2x4 sizes. Driven by performance and a clean aesthetic, the MET is constructed from premium materials with industry leading technology.

The LSBF is an LED strip with a flat profile that is available in 4’ or 8' body lengths. It is designed for surface or suspended mounting applications. The LSBF utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The BAR was designed to be a vandal resistant surface mount luminaire, with prison grade durability. Engineered with a one-piece design, the BAR brings an additional level of security to prison grade fixtures.

The BAG (up/down) and BAGDL (down only) wall or ceiling fixture combines security features along with diminutive size. Less than 4” deep, a back-pan combined with a one-piece housing maximizes impact resistance and prevents unwanted fixture penetration. Suited for schools, mental health facilities, stairwells, corridors, detention centers, and public transportation areas

MEP offers both Reading and ambient lighting in a beautifully designed fixture. The MEP features innovative optical technology which provides powerful, focused illumination for examinations. Its exemplary design directs the light onto the bed and provides glare-free illumination for both the medical professional and patient. This ergonomical styled design helps bring a relaxed, comfortable feel to any patient room.

The BAF combines maximum security construction features with energy saving technology. UL listed for damp locations; optional wet location under covered ceiling. This surface mounted luminaire utilizes a one-piece housing, security lensing and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. The BAF is ideal for confinement/security applications. Suitable for use in inmate cells, psychiatric wards, secure corridors and general population areas.

The WaveLinx PRO Contact Closure Input Module (CCI-P-V) provides analog devices with an interface and network addressability. It offers two modes : mode one has four inputs for momentary and sustained contact inputs . In the second mode the first channel on the device provides an input to the occupancy sensor. The CCI module communicates with other devices on the network and can easily be managed via the WaveLinx mobile app.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.

The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.

The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.

The PRO Wallstation (W-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Many wallstation configurations also include scene raise/lower buttons to further adjust the light levels.

The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.

The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The WaveLinx DALI Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

• Bi color Red/Green LED’s • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 1.2V 900mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed • The battery operated emergency exit lights are the perfect solution for applications that require both an exit sign and an emergency light.

• The Wet location Fire Led Emergency Light provides lighting in harsh climates • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Suitable for wall mount applications • Universal J-box mounting pattern • 120V/277VAC dual voltage operation • 2*12pcs ultra bright 2835 0.5W LED lamp heads for emergency mode, provide more than 400LM output • Built-in 3.6V 2000mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • Dual head emergency lighting, equipped with easy connect back plate and 180 degree rotating heads, makes it a snap to put this dual voltage unit anywhere

• Aluminum housing with high grade acrylic panel • Plastic mounting plate allows top, back or end mount • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 4.8 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

Limited Warranty: 10 yearsWattage: 100W/150W/200W/240W/300W/350WColor Temperature: Standard 4000K & 5000K • Premium 5050 SMD LEDsDistribution Type: Type III/IV/V distributions • Mounting: Wall mount/Arm mount / Trunnion mount/ Slipfitter/Multi Direction MountEfficacy: Up to 136 LPWLumen output:  14,200lm -51,000lm • 1-10V Dimming

Limited Warranty: 10 yearsWattage: 45W/62WColor Temperature: Standard 4000K & 5000KEfficacy: Up to 120 LPWLumen output:  5580lm – 7688lm • 120-277V / 347-480V • 1-10V Dimmable  • Optional accessories: Internal photocell and emergency battery • Standard DLC 5.1

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Suitable for wall mount applications • Universal J-box mounting pattern • 120-277V Universal Voltage Operation • 2pcs 1W ultra bright LED lamp heads for emergency mode • Up to 200 lumen output • Built in 3.6V 1000 mAh Ni-MH battery for minimum 90 minutes emergency operation

EMWP-CR7054

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

• 120-277 VAC, 50/60Hz • 360 degree, maximum coverage 60′ diameter from 40′ height • 0-10V • Operating temperature: -40 – 158 °F  • IP66 for PIR Lens

The LGA-1 Surface Mount fixture features our innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management while exceeding the Well Building standard for glare reduction. With an impressive light output of up to 159 lm/W, this fixture offers specified lumen outputs (SLO) ranging from 131 to 1179 lumens per foot. Its minimalistic 1.5” aperture and low-profile design enhance its aesthetic appeal, while the toolless latch system and Quick-Click 5-Wire setup ensure simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.

The LGADU-1P Direct/Indirect Suspended fixture features innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management, exceeding the Well Building standard for glare reduction. With a Brilliant by Design™ philosophy, this fixture combines a minimalistic aesthetic with advanced louvered optic solution. It delivers exceptional light output of up to 159 lm/W, with specified lumen outputs (SLO) ranging from 131-1179 lumens per foot. The minimalistic 1.5” aperture and low-profile design enhance its sleek appearance, while the innovative slider optic removal system ensures easy installation and serviceability. The fixture is available in individual lengths and seamless continuous runs, and it incorporates a toolless latch system and Quick-Click 5-Wire setup for simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-1PR-LP LoPro Flush Perimeter fixture offers versatile mounting options with Trimless, Trim Flange, and T-Grid flush configurations. Engineered for low-profile installations, it fits within a slim 2.85"–3.05" depth behind the ceiling, ideal for low-plenum spaces. Designed with uncompromised performance, it provides exceptional glare control with options for diffused (Lambertian) or room-fill optics. With a minimalistic 1.5” aperture and specified lumen outputs (SLO) from 224 lm/ft to 1754 lm/ft, the fixture is available in individual lengths or continuous runs up to 300 feet with no lens breaks. Accessibility is simplified with a patented, toolless “Push to Eject” system, along with a Toolless Latch System and Quick-Click 5-Wire setup for fast, seamless installation. Each fixture is proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR Regress Perimeter fixture features versatile mounting options, including Trimless, Trim Flange, and T-Grid regressed configurations, making it suitable for a variety of applications. It accommodates multi-depth ceiling options for most plenum installations, with a 1.75” regress requiring a depth of 5.75”–6.13” (integral driver) and a 3” regress needing 7”–7.38” (remote driver). Designed for optimal performance optics. The fixture boasts a minimalistic 3” aperture and specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft. Available in individual lengths or seamless continuous runs up to 300 feet with no lens breaks, the HTG-3PR ensures easy accessibility for drivers, wiring, and serviceability from below the ceiling, thanks to its patented toolless “Push to Eject” system. Additionally, the toolless latch system and Quick-Click 5-Wire setup facilitate simple and quick installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-1P Suspended fixture combines sleek architectural design with high-performance lighting, made possible by innovative Microstructure EdgeTech Optics™. Offering seamless illumination and uniformity, it supports a range of optical distributions including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, and Ceiling Wash. With a minimal 1.5" aperture and ultra-low profile, the HTG-1P delivers clean lines and uninterrupted rows up to 250 feet—free of lens breaks, pixelation, or hot spots. Installation is fast and tool-free with the patented “Push to Eject” system. Direct or Indirect orientations are available, along with versatile mounting options: standard aircraft cable or 361° locking rotational aircraft cable. Choose between integral or remote driver configurations, all with concealed hardware for a polished finish. Available with Specified Lumen Outputs (SLO) up to 1480 lm/ft and standard 90+ CRI with optional Tunable White. Custom powder coat finishes are also offered to suit any design vision.

The HTG-3P is a 3-inch suspended linear fixture with Microstructure EdgeTech Optics™ for precise control and seamless, uniform illumination. It supports Batwing, Glare Control, Diffused, Wall Wash, and Ceiling Wash optics, with a low-profile depth of 1.38 to 3.4 inches. Designed to match the HTGDU-3P for architectural consistency, it offers continuous runs up to 250 feet, toolless “Push to Eject” access, and aircraft cable or 361° locking mounting. Available with multiple driver options, custom finishes, and SLO up to 1754 lm/ft. Proudly made in Huntington Beach, CA and BABA compliant.