160 manufacturers · 18,987 products

Encased in a high-quality metal enclosure that includes multiple 7/8″ knockouts for easy installation, each unit is equipped with circuit breakers to protect both the driver and the LED load. This magnetic LED drivers are phase-dimmable with a standard leading-edge MLV TRIAC dimmer.

RF to DMX Converter CRF-DMX

DMX Decoder – 12 channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX12C

DMX Decoder – 5 Channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX5C

DMX Decoder – 24 Channel (4Amp per channel), 5-pin XLR output, 8/16 bit switches CDMX24C

LED driver and dimmer switch combined in a single gang box. Simplify your installation and save labor costs.Details & Downloads

Wave hand in front of sensor (range ≤ 2.3 inches) to activate lighting; wave again to deactivate lighting.

Detects motion within view of sensor at a range of approximately 9.5 feet On/off functionality only.

Features a fully touch-sensitive housing for full dimming and on/off control.Details & Downloads

This easy-to-use LED Dimmer Switch allows you to adjust the brightness of LED lights with a classic rotary knob without any troublesome flickering. Details & Downloads

These low voltage dimmers offer smooth dimming from 100% - 1% with no flickering, humming, or jumping.Details & Downloads

LED driver and dimmer switch combined in a single gang box. Simplify your installation and save labor costs.

For use with RF/WIFI & DMX controllers Features • 3xAAA batteries (included) • RF signal output • Operation frequency: 434/869.5/916.5 MHz • Controls up to 4 zones • Save up to 3 modes • FCC compliant • Dimensions: 4.75” x 2.25” x 0.75” • 5 year warranty • IP20

For use in DMX system Features • 24VDC power input • 4 channel output • Input protocols: DMX512, DMX512-A • DMX address display • (2) RJ45 Jacks • 5 year warranty • IP20

GeNetix Switch 8 is an eight-port unmanaged Gigabit PoE network switch that provides a total output of up to 200W of Power over Ethernet across its 8 ports. Ports 1-4 support IEEE 802.3bt up to 100W per port. In modes A & B, all ports support 802.3af and 802.3at standards. This rack mountable switch features a rear PowerCon True1 Mains input connector and is also truss mountable via its M12 threaded insert. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix GD4D is a DIN rail mountable RDM-capable 4-Port DMX Splitter fitted with phoenix screw terminals for DMX IN, THRU, and OUT from terminal block connectors, offering a design ideally suited to the needs of permanent installations. GD4D is powered via an external 12-48V power supply (purchased separately). GD4D features an ‘RDM Disable’ option to strip out RDM data and retime the DMX signal. LEDs provide visual indication to know if the GD4D is connected to external power, if RDM is enabled, and DMX input and output status. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix 10Scene Contact is a DIN rail mountable 10-input dry contact trigger interface that integrates ChamSys control solutions, enabling MagicQ and QuickQ Playbacks and Executes to be triggered by open/close contacts, as well as triggering scenes on GeNetix GN5 and GN10 nodes. Its two 10Scene Ports allow the interface to be daisy-chained with 10Scene Wall Plates and up to ten 10Scene Contacts per chain, all connected via the 10Scene Protocol that also powers the interface. 10Scene Contact provides a user-friendly and easily-integrated solution for adding external dry contact trigger remote control to MagicQ, QuickQ, and GeNetix systems. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix Switch 5IP is a five-port IP65-rated unmanaged Gigabit network switch that can be powered either via PoE or via Mains power to its PowerCon True1 Mains Input connector. This compact and rugged all-weather device comes with multiple rigging options for easily mounting in your rig. Port Status LEDs provide visual indication to know if ports are connected/active and if running at Gigabit speed. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix 10Scene Store is a single universe wall or DIN Rail mounted standalone playback device that stores 10 static lighting Scenes (cues) which can be recalled with connected 10Scene wall plates. Load Scenes from either QuickQ or MagicQ show files or program via its in-built DMX Input port. Powered by either PoE or external 48V power supply, this simple installation device supports up to ten 10Scene wall plates, and features one DMX IN (XLR5 & Wago), one DMX OUT (Wago) and a network port. The 10Scene Store operates as a stand-alone device, where 10 Static Scenes can be stored and then replayed. Scenes can be replayed via: Webserver, 10Scene Button stations connected to the unit or via Network using either the ChamSys iOS or Android 10Scene App or UDP messages allowing 3rd Party Scene Control Integration. Scenes can be programmed either via the units direct DMX Input. When DMX Input is received the device is automatically placed into programmed mode, pressing and holding a 10Scene button on a wall station (for 5 seconds) stores the current DMX input as that scene. Disconnecting the DMX Input exits programming mode. When an Incoming DMX Input is received this takes priority over any active Scenes. When connected via Network Scenes can be loaded to the 10Scene Store from either MagicQ or QuickQ. The 10Scene Store has mode which allows incoming Art-Net / sACN to take priority and loop through the devices DMX Output when received. When Art-Net/sACN is lost then the Scenes panel takes over control again, reconnecting Art-Net/sACN will then take priority again. The 10Scene Store supports a single contact triggers, which can be configured to override both active Scenes or Art-Net/sACN data by activating a configured Scene. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage GeNetix simplifies data distribution with a complete range of Nodes, Gateways, Switches and PoE devices. Branch out with these adaptable extensions of our growing family of intuitive networking devices.

GeNetix Switch 5D is a five-port DIN rail mountable unmanaged Gigabit network switch that can be powered either via PoE or via an external 12-48V power supply (purchased separately). When powered by a 48V power supply, four of its ports support 30W of PoE output per port with a maximum of 60W combined output. Status LEDs provide visual indication to know if the GeNetix GS5D is connected to external power, if its network/PoE ports are connected/active, and if the network is running at Gigabit speed. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix GD4IP is a compact IP65-rated 4-port DMX Splitter that comes with multiple rigging options for easily mounting in your rig. Featuring 1 DMX Input to 4 DMX Outputs and an ‘RDM Disable button’ to strip out RDM data and retime the DMX signal, this ruggedly built device comes with Seetronic IP65 connectors and a PowerCon True1 Mains Input connector. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix GD10 is a 19″ 1U rack-mountable, RDM-capable 10-Port DMX Splitter at home in many different environments, with a design suited for both long-term installations and live events. Two selectable operating modes offer either 1×10 or 2×5 DMX signal distribution. GD10 features an ‘RDM Disable button’ to strip out RDM data and retime the DMX signal, and its ruggedly built construction includes a PowerCon True1 Mains Input connector. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix GA10D is a DIN rail mountable 10-Port DMX/Art-Net/sACN to Analog 0-10V Converter fitted with phoenix screw terminals for DMX in/through and 0-10V out from terminal block connectors, offering a design ideally suited to the needs of permanent installations. GA10D is powered via an external 12-48V power supply (purchased separately) and features an onboard menu display with push button navigation for unit configuration, along with LEDs that provide visual indication of output port status. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

A range of DMX passthrough wall plates available in a variety of configurations: All versions come with locking 5-Pin DMX connectors, black faceplates, and screws for installation use. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

MagicQ MQ70 is the latest offering in the Compact Console range of small and lightweight consoles that you can fly with. The MagicQ MQ70 fits within hand luggage carry on restrictions of all the major budget airlines including, Southwest, Easyjet and Ryanair. The console features a 10.1” Multi touch display, with illuminated encoder and fader tracks. The console supports 24 universes with an option to expand to 48. The console has 3 network ports enabling ArtNet and sACN direct from the console, whilst also having 4 assignable physical DMX ports supporting RDM. This feature packed console also includes WIFI inbuilt to the console for quick connection to ChamSys MagicQ Remote focus application without the need for external networking hardware. The MQ70 features an inbuilt UPS which protects both the console and the Ethernet switch in case of power fail. It has low power consumption and does not require a cooling fan – enabling silent operation making it the ideal choice for touring shows, broadcast, theatrical and corporate shows. With built in MIDI input and output, LTC and audio input for synchronization, the MagicQ MQ70 provides many options for integration with show control and audio systems. The MagicQ MQ70 runs the same MagicQ software as other MagicQ consoles, meaning that shows programmed on it can be loaded and ran on any other MagicQ console (within the universe limits).

At home on the largest of shows, MagicQ MQ500M+ Stadium supports 400 universes direct from the console without the need for external processing. MQ500M+ introduces the ability to expand screen real estate via its two Display Port++ External Monitor ports, and adds inbuilt Wi-Fi for connection of Remote Focus application and an inbuilt 4-port Gigabit Network Switch. MQ500M+ features RGB-illuminated faders and encoder playbacks, with 15 fully-motorised fader playbacks, 15 encoder playbacks and 12 backlit multi-purpose Macro/Execute/Playbacks/Palette keys, giving the console a total of 42 playbacks and providing programmers with a powerful work station well-suited for Concert & Touring, TV & Broadcast, Live Events, House of Worship and Theatre applications. MQ500M+ also features dual HD resolution multi-touch 15” displays with adjustable viewing angles and multi-touch gesture support, for a more intuitive workflow. For additional control, connect a MagicQ MQ500M Stadium Wing and get even more playbacks and another touchscreen display as well. MQ500M+ Stadium has inbuilt MagicVis 3D visualiser with high quality beam and gobo rendering, enabling you to pre-program shows offline and save time onsite. This versatile console comes with 4 DMX ports, an intensity wheel and 100-mm split crossfaders for theatre control.

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

SENSORWORX® wide view and hallway occupancy sensors enable mounting to a wall, corner, junction box, or conduit. This flexibility reduces contractor installation time and provides a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.

The SENSORWORX® wireless wide view and hallway occupancy sensors are a simple, yet reliable battery powered control solution. Preferred by contractors for their flexible mounting methods, SENSORWORX wireless sensors greatly reduce total installation time and wireless pairing fuss. Requiring just a few seconds per device, SENSORWORX wireless sensors can be linked to one or more wireless load controllers (such as the SWX-851 wireless wall switch, or a SWX-950 series wireless power pack). Additionally, these sensors can be configured to work in applications with other wireless or wired ceiling, corner, or hallway sensors to provide extended coverage in large or irregularly shaped spaces. As with all SENSORWORX products, the latest passive infrared technology and digital signal processing techniques are used to provide unmatched occupant detection performance and energy savings.

The SENSORWORX low voltage decorator wall switch provides an attractive companion wall station for a low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) manual on, partial-on, or full range dimming user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables users to override a space’s lighting off if necessary. Functioning as a momentary switch, this one button wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the SENSORWORX line of wall switch sensors, ensuring a consistent style across multiple spaces on a project. Additionally, the single button switch has an integrated locator LED with multiple color and intensity settings. Three button dimming units have an integrated 0-10V output, intuitive raise/lower buttons, and a five LED level indicator.

The SENSORWORX line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX wireless wall switch load controller links to remote occupancy sensors and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX® remote dimming and on/off wall stations are battery powered devices that provide manual operation of wirelessly controlled lighting. These attractive wall stations greatly reduce total installation time and wireless pairing fuss. Requiring just a few seconds per device, SENSORWORX wireless sensors can be linked to one or more wireless load controllers (such as the SWX-851 wireless wall switch, or a SWX-950 series wireless power pack). Additionally, these devices can be configured to work together with other wireless or wired wall stations to provide dimming and switching control from multiple locations.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SENSORWORX 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SENSORWORX wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

Heavy duty switchpack capable of switching 20A loads. Providing 24VDC regulated output to sensors, the heavy duty switchpack provides 150mA rating, capable of power multiple sensors from a single device, while the onboard form C relay provides HVAC tracking BAS outputs for easy integration.

The CAT Wallstation (WST-C) is a wired, low voltage powered wallstation with configurable buttons featuring on/off, raise lower, and preset scene options. Each button’s actions are configurable using the WaveLinx app. The CAT Wallstation communicates with other CAT devices, via CAT5e cable, through its two RJ-45 connectors and can be daisy-chained to work with CAT Dimming Switchpack to provide switch control operations. The CAT Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs.

The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.

The WaveLinx CAT Bluetooth Programming Interface (BPI-C-L) module allows users to program a space by enabling data exchange between the CAT devices and the WaveLinx CAT mobile app. The CAT Bluetooth Programming Interface communicates with other CAT devices, via CAT5e cable, through its two RJ-45 connectors. It has a Bluetooth® Low Energy (BLE) Radio Module that securely pairs with a mobile device when within range. Once connected, users can use the WaveLinx CAT application to identify themselves and configure devices within that area. The module is powered by CAT bus power and comes with mounting tabs for easy installation on the wall or a junction box.

The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.

The PRO Wallstation (W-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Many wallstation configurations also include scene raise/lower buttons to further adjust the light levels.

The WaveLinx Wired Occupancy Ceiling Sensor - Multi Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

As part of the WaveLinx System, the PRO Wireless Receptacle (WR-15/WR-20) enables energy savings by turning OFF the top outlet when the area is unoccupied. The wireless receptacle is automatically paired with all WaveLinx occupancy sensors in a space when it is assigned to an area using the Wavelinx Mobile application. The wireless receptacle uses standard AC power wiring and has an internal relay that will Open/Close the controlled outlet. The use of wireless control features of WaveLinx reduces the wiring needed during installation. Use of the wireless control features of the receptacle also includes power measurement capabilities that can be displayed in the WaveLinx Mobile application.

The WaveLinx DALI-2 Occupancy & Daylight Ceiling Sensor (OCS-D2-P06 / OCS-D2-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor is powered & communicates over the two wire DALI-2 communication bus and allows for all device settings be adjusted remotely via WaveLinx software apps.

CORE Public REST API (TRX-API) provides a secure programming interface that enables third-party partners to obtain real-time data from WaveLinx controlled spaces as well as Cooper Lighting Solutions BLE tags. Partners can then use the data to offer value-added solutions that improve business processes and tenant experiences. The CORE Public API interface is hosted on the CORE Core appliances.

The WaveLinx Wired Forward Phase to ELV Power Extender (PE400-1) allows a dimmers power handling capacity to be extended to a full 1000W/VA on 120V input power. It allows a dimmer to dim or switch a fully loaded circuit of electronic low voltage and incandescent loads only.

The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx LITE Battery-Powered Wallstation (WWBL-Series), provides wireless control of the lighting in an area, is available in small and large button configurations, and is fully configurable to provide local control in each area. They provide default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. They mount in a standard wallbox (single or multi-gang) suitable for use with standard wall plates (not included).

The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.

The WaveLinx Wired Digital Wallstation (FDW) offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The CLS Wallstation is the new standard in intuitive layout and operation with a large circular On/Off button, an universal module with up to 10 button configurations and custom engraving. Each button has a backlight indicator light and offers users with strong tactile feedback. Designed to fit with standard decorator wallplates, CLS Wallstation can be ganged together to meet all project needs.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The PRO Outdoor Fixture High / Low Mount Sensor (SWPD*) offers passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for outdoor site and indoor environments with installation heights up to 40 feet and coverage up to 5000 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality. Available color options: white, black and bronze.

The WaveLinx DALI-2 Wallstation offers an intuitive layout and operation with a large circular On/Off button, a universal module with up to 8 different configurations, large or small button, color, and engraving options. Designed to fit with standard decorator wallplates, the Wallstation can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.