160 manufacturers · 18,987 products

The WaveLinx DALI Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The CORE Mechoshades Interface (TRX-SHADES) allows specifiers to achieve a consistent design aesthetic within the space by using the WaveLinx Pro wallstations to control both shades managed by Mechoshades system and lights managed by WaveLinx system.

The LITE Wireless Tilemount Sensor Kit (WTK) is an accessory to the WaveLinx LITE (WLC) system which may be used with out-of-the-box functionality or commissioned via the WaveLinx LITE mobile application. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

The WaveLinx Unmanaged Network Switch with 8 PoE+ ports (GS308PP) provides power and data from a single CAT-5 or 6 cable to devices such as WaveLinx Area Controller and WaveLinx Touchscreen.

The PRO Battery-Powered Wallstation (WWB-Series) is a wireless, battery-powered wallstation with configurable buttons featuring on/off, raise lower, and preset scenes options. Each button’s actions are configurable using the WaveLinx app. The PRO WWB-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. The in-wall wallstation can be installed in a single-gang or multi-gang junction box. The wallstation uses a 2.4 GHz IEEE 802.15.4 standard based radio to form a wireless and reliable mesh network with other PRO devices and WaveLinx Area Controller.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

CORE OpenADR Interface (TRX-OPNADR) allows WaveLinx users to take advantage of utility company incentives by participating in ongoing Demand Response (DR) programs. The CORE OpenADR interface is able to automatically retrieve live power demand information from the utility company and automatically activate load shed profiles according to pre-configured user settings.

The PRO Wallstation (WW-Series) is a wireless, 120/277 VAC powered wallstation with configurable buttons featuring on/off, raise lower, and preset scenes options. Each button’s actions are configurable using the WaveLinx app. The PRO WW-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. The wallstation uses a 2.4 GHz IEEE 802.15.4 standard based radio to form a wireless and reliable mesh network with other PRO devices and WaveLinx Area Controller.

The PRO Battery-Powered Wallstation (WB-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation is available in four hardware configurations with multiple engraving options including generic SCENE versions. The wallstation is easily programmed though the WaveLinx mobile application.

The WaveLinx PRO Tilemount Sensor Kit Without Control Module (WTE) provides motion sensing, daylight dimming and real-time location data. The external plenum rated power supply, WLX-PS-SENSOR, can be used to power the WaveLinx Wireless Tilemount Sensor Kit and the low voltage power supply can power up to 16 sensors. Multiple pre-terminated plenum-rated cable options are also available to simplify the wiring.

The IR Remote (ACC-P-RT) streamlines installers' or set-up technicians' processes when commissioning WaveLinx PRO-enabled or WaveLinx LITE-enabled sensors. The IR Remote allows the installer to communicate directly with the integrated sensor and send commands. Most commonly used commands for WaveLinx PRO include enabling/disabling pairing mode, reverse identification, enabling/disabling closed loop daylighting, adjusting daylight light levels and occupancy sensor sensitivity, resetting a sensor to default factory and performing more advanced functions such as assigning point guards for large zone applications. WaveLinx LITE functionality provides reverse identification functionality during provisioning.

The LITE Line Voltage Wallstation (WWL-Series) is a multi-scene, single area dimming wallstation which provides customized light level for an area. The wallstation is an integral part of the WaveLinx LITE system and is available in small and large button configurations. These wallstations are mains (120-277VAC) powered and provide wireless control of the lighting in an area. The wallstations operate on a wireless mesh network based on IEEE 802.15.1 (Bluetooth® 4.2 Low Energy) standards.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

• Bi color Red/Green LED’s • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 1.2V 900mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed • The battery operated emergency exit lights are the perfect solution for applications that require both an exit sign and an emergency light.

• UL, Energy Star, damp rated • CCT adjustable option by dip switch (3000K/3500K/4000K) • 110-347V AC Input option • Split design of led light engine and trim, one engine allows for seamless integration of multiple trim options • Trim size : 6″ 8″ 10″ • 1-10V dimming • 5 years limited warranty

AVI-DC-PIR

• Provides line voltage On/Off switching and 0-10VDC dimming control • Works with ballasts or LED drivers • High and low modes fully adjustable from 0-10V • Time delay from 10 seconds to 60 minutes • Optional cut off delay • Adjustable ramp up and fade down times • High inrush stability zero crossing circuitry for realiable, long-life operation latching relay is durable for all load • UL773A and FCC

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

• Battery powered with 10+ year battery life • AC 110-277V version • 4 buttons plus trim up/down and OFF • Software configurable 4 Button Scene control and Dimming wall station configurations • Replaceable button faces • Fits standard Decora wall box and multi gang trim plates • Screwless cover plate also provided • UL Listed

AVI-DC-MW

AVI-KIT-LVFA-1CH

AVI ON APP

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed

The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using software from our website

The Pharos LPC (Lighting Playback Controller) is an award-winning, all-in-one control solution for themed entertainment and LED lighting installations

The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using software from our website

Complies with the DMX512 standard protocols

Expert Software helps and guides you through programming the controller

The Pharos LPC X (Lighting Playback Controller X) offers an extreme level of power and integration, making it an ideal solution for landmark lighting installations with significant channel counts

The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using the included software

The Pharos TPS 5 (Touch Panel Station 5”) is an elegant interface with a customizable, 5” capacitive touchscreen, compatible with any Pharos Designer Controller

The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using software from our website

The DMX/RDM operation is a 4 way DMX/RDM splitter, features one DMX/RDM input/THRU and 4 DMX/RDM outputs

In the same size and look as Expert Control and Expert Repeat, this DIN rail mount PoE network switch only requires a 24V DC power supply

Standard DMX/RDM interfaces; Set addresses via the digital display and buttons

Expert Repeat is a convenient DMX512 splitter / repeater with four output ports compatible with the RDM standard to provide DMX distribution to luminaires

The lighting levels, color and effects can be programmed from a PC, Mac, Android, iPad or iPhone using the included software

The Pharos TPS 8 (Touch Panel Station 8”) is a new, spacious, elegant interface with a customizable, 8” capacitive touchscreen, compatible with any Pharos Designer Controller

The Dual DMX Relay (DDR) is a compact, portable, and IP-rated power control solution designed for rapid deployment in entertainment and AV environments. With a single 16-amp input feeding two independently controlled outputs, the DDR provides reliable switching for fixtures, projectors, distributed loads, and remote gear without running power back to a rack. DMX and RDM control ensures seamless integration with existing lighting networks, while its rugged housing and flexible mounting options make it ideal for touring, temporary installs, architectural uplighting, and outdoor events.

RS-232 Controlled Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Time proven, reliable, G-E RR7P3 latching relays snap in and have low voltage plug-in connectors Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 10 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuitcount Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Built-in emergency override function

RS-232 Controllable Circuit Breaker Panel The SCLC series of RS-232 controlled Load Center uses motorized circuit breakers to offer a labor-saving, one-panel alternative to relay panels. The economical Load Center panels require the least wall space for tight locations and are available in 26 and 41 circuit sizes of 3 phase, 4 wire 208Y/120Vac. Load Center’s are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The SCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Emergency override function standard on every panel.

RS-232 Remote Control Circuit Breaker Panel Have as many RS-232 controlled circuits as you need in one power panel. You can mix RS-232 controlled motorized branch breakers and standard QO breakers together for a single power panel solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! Big as it is, the SCP still saves valuable wall space when compared to traditional relay-based control systems. The SCP comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The SCP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers. Saves space compared to breaker panel + relay panel installations Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Easy set-up, no on-site commissioning or factory start-up required Simple jumper system sets RS-232 addressing Individual or zone control of circuits IP / serial integration with Building Management Systems Automatic load shedding feature standard Brownout / Power outage shut-down standard Branch current monitoring available SurgeX in-panel surge elimination modules – optional

Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!

One-Touch Sequential System Control Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277 volt models available Daisy-chains for unlimited circuitcount Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels

One-Touch Sequential System Control The MSP series utilizes remote controlled breakers manufactured by Square D to provide a single panel sequencing solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! The MSP offers a dedicated cabinet for isolated technical grounding, and comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The MSP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers. Sequential turn on of electrical circuits, reverse sequence off, standard Selectable delay step-rate setting standard Simple set-up, no on-site commissioning required Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Automatic load shedding for emergency shut-down standard Brownout (under-voltage) shut-down for processor protection standard Contact closure inputs for one-touch system control standard Contact closure outputs optional on all panels SurgeX in-panel surge elimination modules – optional

Self-contained, web-enabled remote control relay panels Deal with the manufacturer for quick response on quotes, delivery and support! Panel packages are ready to install, includes hardware and software. Integrated web server and browser interface for remote set-up, operation and monitoring. With patent-pending features no one else has! So easy to set up that no on-site factory commissioning is required. Control relays individually or establish up to 12 zones for grouped operation. Simply point and click for easy zone setup and breaker operation. Built in scheduling program with astronomical clock for timed zone control. Built in contact closure inputs for sensor or wall switch control. Built in IP interface for smart phone, tablet or laptop control and monitoring. Seamless integration into any DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional) control system. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit level selectable auto-on egress lighting feature standard (ETL listed UL 924). Optional outbound signaling relay control. Built-in emergency override function standard. Power outage and brownout protection (optional) assures that your circuits never power up or down incorrectly. 120/208 or 277/480 control Locking hinged cover (lock optional) Available in 6 different configurations housing 8-64 relays (8 and 32 relay models shown)

Remote Setup, Control, and Monitoring in One Panel The most advanced self-contained controllable breaker panel on the market today. The RPC combines all the features you’ve come to expect from LynTec panels with new web enabled control and monitoring capabilities. Based on the G3 PowerlinkTM hardware platform by Square D, the RPC uses the latest remotely operated breakers and can control up to 168 circuit breakers with a single controller. In addition, the RPC’s expanded interface options (DMX, sACN, HTTP, Telnet, RS-232 or BacNET (optional)) allow users to monitor and control the system from any remote location. New programmable software platform (patent pending) can be customized for optimal power management. So simple to set up, no on-site factory commissioning is required. Control circuits individually, or establish up to 12 breaker group zones. Built in scheduling program with astronomical clock for timed zone control. Built in IP browser interface for smart phone, tablet or laptop control and monitoring. Built in contact closure inputs for wall switch or sensor operation. Circuit level load-shedding feature standard. Circuit level sequencing with selectable step-rates standard. Circuit selectable auto-on egress lighting feature standard (ETL listed UL 924) Circuit selectable brown-out (under-voltage) protection standard. High current contactor control via I/O/R card optional. SurgeX in-panel surge elimination modules available as an option. Current monitoring and reporting available as an option. Plug-on control bus strips simplify wiring and installation. 120/208V, 240V or 277/480V operation. 200% Neutrals standard 225A Main Standard (150A to 400A or MLO versions optional) Easy setup for sequential system control of audio systems or individual circuit control of non-dimmed lighting circuits. The LynTec isolated technical ground bar reduces electrical noise and improves sound system performance.

The Xtend XPC Power Control Series is composed of independently located remote relay modules that offer flexibility in installation and control. LynTec continues to serve the needs of Pro AVL with protective, reliable, and user-friendly equipment. Professionals in the audio, visual, and lighting industries rely on us to control power in venues from houses of worship, schools, sports venues, conference centers, theaters, auditoriums to your local performing arts center. Although we have a history of outfitting storied venues with our innovative control solutions, our future is everywhere there is amplified sound, performance lighting, and distributed video to control. LynTec’s traditional wall mounted relay and motorized circuit breaker panels are incredible options for many organizations. Our latest offering, the XPC Power Control Series, brings professional and dependable control to every venue, regardless of your wall space or power needs. With a range of products from a standalone 20 or 30 amp cube enclosure to a hardwired vertical rack-mounted strip that can manage up to four 20-amp circuits. This series brings automation to every installation regardless of size or location