160 manufacturers · 18,987 products

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Fixture Fitting with DALI Control (FF-5LT) feeds power and control to any lighting fixture, while allowing the power and control to feed through to the next fixture

The MWS Starter Fixture Cable (SF) starts the MWS system immediately at the electrical junction box or at the switch box and continues to the first lighting fixture. Subsequent fixtures connected to the Starter Fixture Cable are wired with standard Fixture Cables(FC). The line side connector installs into any 1/2" knockout and has #18 tap leads to connect to the fixture wiring. All unused outlets require a MWS dust cover.

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control (TC-5LT) feeds power and control wiring to wall or ceiling fixtures while feeding downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-5LT. See the Extender Cable specification sheet for compatible models.

Feeds power to wall mounted or ceiling mounted fixtures and convenience outlets while feeding circuits downstream to another electrical component. MWS Extender Cables feed power to each T Cable. All unused outlets require a MWS dust cover.

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control Only (TC-PP5LT) feeds only the control wiring to wall or ceiling mounted DALI controls, while feeding both power and control downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-PP5LT. See the Extender Cable specification sheet for compatible models.

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T SO Cord with DALI Control (TS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Extender Cable (EC). See the EC specification sheet for details on compatibility.

Introduces local switching into the MWS system. Switch Drops may be installed during rough-in or renovations. Extender Cables bring power from starters to the first Switch Drop and between consecutive Switch Drops. Switch Drops can also be connected together for multiple switch locations. All unused outlets require a MWS dust cover.

The MWS Starter Fitting is the starting point for the MWS system. The Fitting is installed in a standard 1/2" knockout of an electrical unit. The Starter Fitting is mounted externally and does not impact wire fill. All unused outlets require a MWS dust cover.

MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter

The MWS Splitter (SP) adds an additional power out at any point within the MWS system. All unused outlets require a MWS dust cover.

The CGRK panel retrofit kit is the go-to kit for projects requiring energy savings, simple installation and optional WaveLinx controls. Offering both selectable lumens and selectable color, the CGRK is the ideal fixture for retrofit applications for schools, hospitals and many other facilities.

Introducing the versatile and easy to install round LED high-bay, the Metalux EZBY! Experience up to 30,000 lumens of adaptable brightness with three selectable CCT options in the new EZBY high-bay. Designed for convenience, EZBY is sensor-ready and includes a 6ft cord, mounting ring, and robust IP65 rating. Whether optimizing warehouse flow or upgrading general lighting, the EZBY offers an easy, efficient, and cost-effective solution for your lighting needs.

The SLSTP LED strip series balances performance, aesthetics, and cost and comes in 8’, 4’ and 2’ lengths. Designed with decorative endcaps, junction box cover, tool-less channel cover, single frosted lens (no tandem breaks), CCT / lumen select and dedicated CCT options, the SLSTP is the right choice for stock and design build applications. Models are DLC listed to enable rebates for maximized payback. The SLSTP can be suspended, surface or wall mounted and is suitable for single or continuous row installations.

The Surround is a modern illuminated fixture that elevates the look of any commercial space. The Surround illuminated frame comes standard with (4) selectable CCT's in 80+CRI and is offered with (3) selectable lumen packages in low, medium, and high. The innovative 1.5" wide ribbed lens design delivers a smooth fully luminous aesthetic matching light distribution from standard troffers and panels. The Surround uses the existing T-grid and ceiling tile or can be suspended and comes in (5) different form factors making it a perfect solution for upgrading a variety of spaces. The Surround illuminated slim LED is a great modern solution for commercial spaces like college campuses, modern offices, and conference rooms.

The VT3 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT3 incorporates a sealed and gasketed, reinforced fiberglass housing with a high impact diffuser. This VT3 optical performance is ideal for interior and exterior applications including parking garages, food processing, canopy, manufacturing and complex environments.

The Tandem In-Line Wiring option provides factory installed wiring when fixture sections are applied in pairs, and require left/right lamp switching. To explain, ballast receive their power from the circuit, with lamps getting their power from the ballast. TILW is the method of applying power from the ballast to specific lamps. TILW only applies to 2 or more lamp cross sections. If the luminaire has only one row of lamps, TILW is already present and unnecessary to specify. The TILW option is available on IA/IC, DI/DIM/DIVM, EI/EIM/EIVM, SS, SSL, SN, SNSM, SNRA, STN, STM, STW, RCG, P410, UT, I5 and BSX. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

The CGSB service from below panel is a perfect solution where the aesthetically pleasing look of a fully luminous panel is desired, but serviceability access from below the ceiling is required. The CGSB is fully configurable, allowing for flexibility in design for light levels, color temperatures, dimming options to 1%, connected control systems, emergency and much more. Additionally, CGSB leverages a housing design to fit into most plenum spaces making it a great solution for K-12 schools, general healthcare spaces like lobbies, corridors, and any other space that requires a simple wipe down lens with accessibility from below. The CGSB delivers the perfect combination of a smooth frosted panel with the feature of a room side access door to meet any service from below specification requirements.

SWLED is a connected LED surface or wall mount luminaire which can be used in a broad range of commercial and industrial applications. This series delivers high quality illumination with the latest solid state lighting and electronic driver technology for optimal performance and maximized energy efficiency. Offered with three different lens distributions and six different sensor options the SWLED is an ideal choice for general purpose lighting where customers want to maximize energy efficiency or take full control of the space with enterprise-level connected sensors.

The SkyRidge™ Series sets a new industry standard by offering an aesthetically pleasing, yet affordable LED alternative to fluorescent fixtures. Patented WaveStream™ technology provides unmatched optical performance, efficiency and unique visual style. SkyRidge delivers a distinct blend of technology and beauty, making it the natural choice for today’s commercial environments.

The Metalux WP utility LED wrap light is a DLC compliant fixture designed to retrofit and replace fluorescent wraparound lights. The WP has a compact, low-profile design, prismatic lens and post-painted steel exterior. Standard features include prismatic acrylic lens, surface or suspended mount features, universal voltage cold-start driver, and five year warranty. These features make the WP a combination of quality and value that can be used in most commercial, educational, residential, corridor, stairway, multi-use or utility applications.

The Metalux AP Shoplight is an extruded aluminum integrated LED fixture that comes with a 120V grounded cord & plug. The APSHP replaces 2 or 3-lamp fluorescent shoplights or strips, and is well suited for work benches, counters, work-shops, studios, and storage areas where general task lighting is needed. The APSHP includes mounting hardware and on/off pull chain for easy installation and operation. The APSHP is UL-listed with LEDs rated to 50,000 life-hours and backed by a 3-year warranty.

Metalux™ offers many different mounting options and accessories for use across the Industrial and Strips series of products designed to make installation easy and aesthetically pleasing. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

Benchmark LED is designed for a wide variety of industrial applications where higher ambient performance is required for complex environments. Its heavy-duty diecast aluminum body provides durability, optimal thermal control, and longer system life. Its advanced optical systems delivers premium efficacy and multiple distributions. The Benchmark is an ideal high bay fixture for use in industrial, manufacturing, cold storage, large indoor, sports/recreation, and retail applications.

The WN Series is a surface wraparound luminaire featuring energy efficient performance. The luminaire's clean, low profile design is both appealing and functional. The WN Series utilizes a clear, low brightness, extruded acrylic refractor for high performance and aesthetics. The efficient and stylish WN Series is the perfect wraparound for commercial applications.

The Metalux™ Electronic Undercabinet Series provides an efficient task lighting solution for any decor. Available in either the Ultra Slim profile with T5 lamp technology or Slim profile with T8 lamps. The electronic undercabinet series is not only high quality but an excellent value with post-painted housings, 100% acrylic non-yellowing lenses, and color corrected lamps. Available in various lengths, the undercabinet fixture conforms to various applications such as kitchens, offices, study areas, displays, computer stations and any other application where an inconspicuous light source is required. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

The CGTX series is a fully configurable LED panel designed for today’s world of increasingly complex lighting and control needs. CGTX offers comprehensive solutions including integrated controls, emergency, high lumen output, 90+ CRI and 1% dimming options. Its low profile back-lit design ensures uniform illumination that fits shallow plenums with room to spare. The CGTX is part of the robust CGT family series and ideal for schools, offices, general healthcare, and other commercial spaces.

The Metalux Encounter™ Metric Series redefines ambient lighting by blending contemporary styling with Eaton’s proprietary WaveStream™ technology. The result is exceptional performance and superior energy savings – all at an affordable price. The highly efficient LED system with advanced optical design delivers optimal light uniformity, resulting in soft, natural light for superior visual comfort. Encounter is a perfect balance of form and function, making it an ideal choice for commercial interiors around the world.

The Metalux VT2 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT2 LED incorporates a full metal tray and heat sink inside a reinforced sealed and gasketed fiberglass housing with a high impact diffuser. This Vaportite series is suitable for interior and exterior applications and can be surface, chain, cable or stem mounted.

The Metalux Encounter™ Series redefines ambient lighting by blending contemporary styling with Cooper's proprietary WaveStream™ technology. The result is exceptional performance and superior energy savings – all at an affordable price. The highly efficient LED system with advanced optical design delivers optimal light uniformity, resulting in soft, natural light for superior visual comfort. Encounter is a perfect balance of form and function, making it an ideal choice for commercial interiors.

Metalux WSL - Linear with WaveStream™ technology series redefines linear ambient lighting by offering a balance of the modern contemporary styling with the innovative WaveStream technology to deliver exceptional performance and superior energy savings. WSL’s highly efficient LED system with advance optical design delivers an unparalleled combination of optimal light uniformity for enhanced visual comfort. These exceptional performing Accu-Aim™ optics allow for maximum energy savings while achieving desired light levels.

Metalux™ offers both modular and factor installed motion sensor options with a complete range of coverage patterns to increase energy savings opportunities. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

The NWS Selectable wrap offers selectable color and selectable lumens in both 2' and 4' lengths to adapt into any commercial space. The NWS can be surface, wall, or suspension mounted and is designed to meet energy saving DLC efficiency standards. Save even more with the optional integrated microwave motion sensor which is fully selectable to meet local compliance needs. This sleek wrap, with thoughtfully designed end caps, allows it to blend into any ceiling design with a modern low profile look.

The Metalux Accord™ LED Series combines optimal illumination design and contemporary styling with Cooper's Linear LED Platform. Accord’s high performance LED system with advanced light distribution and attractive appearance deliver unprecedented energy savings, comfort and aesthetics. And, it simplifies installation and maintenance with a tool-less design.

SRL is a linear LED surface, wall or suspension mount luminaire with multiple sensor control options integrated for use in a broad range of commercial and industrial applications. This series utilizes the latest LED systems, electronic drivers and sensing technologies to simplify the installation and maximize efficiency. Integrated sensors are installed, tested and suitable for use with wired and wireless systems. Offered with three different lenses and distributions, this series provides uniformity of light and sensor coverage making it a versatile choice for general and special purpose lighting.

The WN Series is a surface wraparound luminaire featuring energy efficient performance. The luminaire's clean, low profile design is both appealing and functional. The WN Series utilizes a clear, low brightness, extruded acrylic refractor for high performance and aesthetics. The efficient and stylish WN Series is the perfect wraparound for residential applications. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

The Plug-In System provides factory installed branch circuit wiring and plug-in connectors when row mounting fixtures. This labor and time saving option is designed to simplify fixture installation and wiring and allows fixtures to be installed quickly and easily. The PI system is available for fixture sections up to 8' in length for continuous row wiring by simply plugging the sections together. Each PI section is factory wired to the ballast leads and color coded for easy circuit identification. Standard PI system harness contains no separate groundwire, with ground provided by the fixture body. An option to the system provides a separate ground wire in the harness where required. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.

The DLC listed ST LED strip now features 0-10V dimming and CCT select. Use the ST to replace fluorescent strip lights for increased energy savings and utility rebates. The ST comes with a continuous row mount aligner, tool-less channel cover, universal voltage driver, CCT select or dedicated 4000K options and a five-year warranty. These construction features make the ST a combination of quality, performance, and value that helps make ordering, installing and saving energy the top focus of any stock or project business.

The TopTier™ Series of Parking Garage and Canopy luminaires utilizes advanced waveguide technology in a sleek aesthetic to meet even the most stringent design requirements. Patented WaveStream™ technology combines optical precision with visual comfort to provide the highest performance parking garage luminaire available, reducing required fixture counts while achieving maximum uniformity, safety and security.

The BRT6 LED Bollard from McGraw-Edison brings specification-grade performance into the outdoor pedestrian space, while offering tremendous versatility and value. Rooted in a modest visual form appropriate for a wide range of architectural styles and applications, the BRT6 is capable of high output and wide spacing, while producing zero uplight in any configuration.

The Galleon™ wall mounted LED dayform appearance is complementary with the Galleon area/site luminaire bringing a modern architectural style to wall mounted lighting applications. The Galleon family of LED products deliver exceptional performance with patented, high-efficiency AccuLED Optics™, providing uniform and energy conscious lighting for parking lots, building and security lighting applications

The Galleon™ Pedestrian Companion LED luminaire is complementary with the Galleon area/site luminaire providing a cohesive, modern architectural style to area, site and roadway lighting applications. The Galleon family of LED products deliver exceptional performance with patented, high-efficiency AccuLED Optics™, providing uniform and energy conscious lighting for parking lots, building and security lighting applications.

The Boca 612 is a tiny 4-1/2" diameter inground fixture for use with a 120V line voltage PAR20 halogen lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. Designed for recess mounting in concrete, brick, stone or dirt it is suitable for drive-over applications.

The Lumière Eon 303 Bollard luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is constructed from machined and extruded aluminum creating a sealed optical compartment. The LED bollard provides a zero uplight solution with a fixed head in 8.5W, 15.5W, or 30.6W configurations. The Eon Bollard luminaires are ideal for pathway or general ground mount illumination where greater lateral or forward throw illumination is needed. Photocell control options are available.

Lanterra 1002-P1 (one head) and 1002-P2 (2 head) is a small 2.5 O.D., line voltage Path light with dimmable LED. Each model attaches to an extended length-mounting stem. The side swivel mount on P1 gives 360° rotation while the center swivel mount on P2 adds to 180° tilt along with the 360° rotation. The luminaire comes with various mounting, beam optics. It also comes with various lens, louvers and colors or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

Lumiere offers a variety of surface, wall, and tree mounting accessories. All are equipped with a standard 0.5-inch NPS threaded mounting hole to accept fixtures with 0.5-inch NPS threaded stems.

Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.

The Aspen 1900 bollard features a sleek, contemporary aesthetic and low glare fixed optics. Our patented LumaLevel™ leveling system provides quick installation, easy adjustment, secure mounting and protection from vibration. Aspen bollards are 3.5” in diameter with in two standard heights of 24" (610mm) and 30" (762mm).

Rio architectural step lights provide beauty, performance and durability. Transitional styling, low profile design and no visible fasteners provide seamless integration with architectural styles of all kinds. Logical, modular design elements facilitate fast and foolproof installation in all types of wall surfaces including drywall, concrete pour or brick/masonry. All models include IP68 rated outdoor protection, but are also suitable for indoor wall-mounted applications, including those with direct insulation contact (IC). All models are ADA compliant.

Coronado 812 is a compact line voltage fixture for use with PAR38 halogen lamps. The fully adjustable mounting stem provides 340° tilt and 360° rotation for easy aiming. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects.

The Lumière Eon 303 Sign and Ceiling luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, and paired with a recessed junction box is an IP66 rated fixture that will look and perform great for years. The EON 303 Sign and Ceiling luminaires are ideal for wall mounted signaged, surface or ceiling, façade/canopy illumination, and perimeter/pathway illumination.

The Lumière Eon 303 wall mount luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, and paired with a recessed junction box is an IP66 rated fixture that will look and perform great for years. The EON 303 Wall ideal for surface or ceiling, standard or inverted mount for façade/canopy illumination, and perimeter/pathway illumination.

The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.

Lanterra 1002 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

The Monaco 3002 delivers precise, low-glare ingrade illumination designed to elevate pedestrian environments with flexibility and performance. The Monaco 3002 features a 7-LED platform with beam angles ranging from 9° to 35° for tailored lighting effects. The adjustable 3002A offers up to 25° tilt and 360° rotation with lockable aiming, while the 3002N provides a cost-effective fixed uplight option. A durable 7.5” diameter IP68-rated housing ensures long-term reliability, while regressed optics enhance visual comfort. Quick-connect wiring simplifies installation and maintenance.

Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.

The Lumière Eon 303 Accent luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, contains a sealed optical compartment and mounts to an integral recess junction box creating an IP66 rated fixture that will look and perform great for years. The Eon Accent luminaire is ideal for floodlight illumination of low level signage, building façades, or for ground mount applications where greater lateral or forward throw illumination is needed.

Coronado 806 is a ultra-compact line voltage fixture for use with PAR20 halogen lamps. The fully adjustable mounting stem provides 340° tilt and 360° rotation for easy aiming. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects.

The Lanterra 9000 Wall Cylinder Series is a premium line of architechtural wall luminaires. The three available models span three diameters, 2.5", 3.25", and 4.25" to fit the scale and light level most appropriate for a wide range of applications. Line voltage input can be managed with integral or remote drivers while always having the ability to cover a 4" junction box. After installation, the light output can be fine tuned as needed with field interchangeable optics and up to two optical accessories.

The Lumière Eon 303 Pathway luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, contains a sealed optical compartment and mounts to an integral recess junction box creating an IP66 rated fixture that will look and perform great for years. The Eon Pathway luminaire is ideal for walkway applications where mounting heights of 26 inches or less are desired and greater lateral or forward throw illumination is needed.

Rio architectural step lights provide beauty, performance and durability. Transitional styling, low profile design and no visible fasteners provide seamless integration with architectural styles of all kinds. Logical, modular design elements facilitate fast and foolproof installation in all types of wall surfaces including drywall, concrete pour or brick/masonry. All models include IP68 rated outdoor protection, but are also suitable for indoor wall-mounted applications, including those with direct insulation contact (IC). All models are ADA compliant.