160 manufacturers · 18,987 products

The CLN Series is a Clean Room LED Vapor Tight, gasketed enclosure that is completely dust and moisture resistant. The CLN utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The BAA is a specification grade maximum security recessed luminaire. Designed and engineered for maximum security prison applications, the BAA is available in 1x1, 1x2, 1x4, 2x2, and 2x4 sizes.

The CLU is a narrow spectrum recessed flange LED luminaire. Available with amber, white, or amber and white LEDs. With a narrow spectrum 570nm amber LED circuit, the CLU is able to provide highpurity light without UV for various applications. The high-CRI white LED circuit provides accurate color rendition at a high output.

The CLDFR is an IP65, Wet location, IC-rated luminaire featuring a combination of 630nm red and white LEDs for vivarium applications. Gasketed housing and door frame create a sealed enclosure. The CLDF is available in 1x2, 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, 90 CRI, MILSTD 461G compliant, and 12W emergency driver. Suitable for biosafety labs rated BSL 1 and 2 (inset doorframe) and biosafety labs rated BSL 3 and 4 (overlap doorframe). Suitable for Class 1/ISO 3 Cleanrooms. For use in insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The BAU is an LED surface ceiling mount prison grade fixture.

The BAQ is built from 16 gauge stainless steel post painted electrostatically applied white TGIC polyester powder coat – 5-stage pre-treatment. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes, one 3/4" tapped hole on back of housing, four 3/4" tapped and plugged holes on sides of housing.

The CLB Series is an IP Rated Mini Wash Down LED Clean Room High Bay luminaire. It is compact for tight areas and boasts a gasketed enclosure that is completely dust and moisture resistant. The CLB utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The MEB is a complete lighting solution for the operating room. High transmission and diffusion lens with choice of symmetric, asymmetric/symmetric, and full asymmetric optics to accommodate the lighting needs of surgical suites. Available in 1x4, 2x2, and 2x4 sizes. Typically positioned around the perimeter of the operating room. Available with choice of housing and doorframe materials, anti-microbial paint, and a MIL STD 461G compliant option, the MEB is the perfect choice in the operating room surgical suite.

The BAE is a maximum security, prison grade, surface mount luminaire. The BAE can be both ceiling- or wall-mounted. Engineered with a low-profile clamshell housing, while utilizing inner/outer lenses and tamper resistant fasteners for impact resistance and penetration, and to prevent contraband concealment. UL/ cUL listed for damp locations. The BAE is ideal for correctional and high abuse applications, such as inmate cells, psychiatric wards, secure corridors and general population areas. Available with knockouts for continuous runs (option BAECR).

The MEE series is a combination of both ambient and exam light for hospitals, nursing homes and other patient care facilities. The MEE is an ICrated specification-grade luminaire which provides a cost-effective LED patient room lighting solution. Eliminates the need for wall mounted luminaires. Available in 2'x2' and 2'x4' options, the MEE is the perfect healthcare solution for For use in insulated ceilings.

The CLE is a surface mount IC-rated luminaire that provides a costeffective LED clean room lighting solution. Gasketed housing and door frame create a sealed enclosure. The CLE is available in 1x4, 2x2, and 2x4 sizes. Available options such as anti-microbial paint, and wet location. MILSTD 461G available, NSF listed, Red and Green LED option available. Suitable for biosafety labs rated BSL 1 and 2. Suitable for Class 1/ISO 3 Cleanrooms. For use in wet locations (optional), insulated ceilings. NSF/ANSI 2 Food Zone, Splash Zone and Non-Food Zone Applications.

The BAS LED combines maximum security construction with energy saving technology. The BAS is ideal for confinement/security applications. This surface mount luminaire is perfect for applications such as inmate cells, psychiatric wards, secure corridors and general population areas. UL listed for damp locations.

The fully enclosed MEC offers ambient and/or examination lighting, dimmable to the appropriate lighting levels for either occasions. The small aperture MEC is flush to the ceiling line, allowing quick, easy, as well as effective wipe-down. Separately switched ambient and exam functions provide the ability to accommodate the many necessary activities performed in the patient room. Specify the nightlight as an option for an additional function. Typically used in pairs, and positioned along both sides of the bed, the MEC offers glare and shadow free illumination. Specify the LED reading and/or chart light for an additional function in the patient room.

The MEO LED features innovative optical technology which provides powerful, focused illumination for examinations. Its exemplary design provides excellent vertical illumination as well as glare-free illumination for both the medical professional and patient.

The MET provides a supplemental lighting solution for Behavioral Healthcare facilities. MET is available in 1x4, 2x2, and 2x4 sizes. Driven by performance and a clean aesthetic, the MET is constructed from premium materials with industry leading technology.

The CLPIMP is ideal for biomedical labs, food processing/testing centers, pharmaceutical labs, government facilities, schools and public areas. The CLPIMP is a top access clean room recessed luminaire for IMP ceilings. 625lb load tested to reduce the hazard of foot traffic. One piece overlapping door provides easy cleaning and air-tight integrity of luminaire. Food Zone/Non-Contact listing, ideal for food processing applications.

The CLF is a low-profile, architecturally designed wall-mounted luminaire built to meet the demands of today's clean room facilities. The CLF provides optimal ambient light with due to its specially designed optics. The CLF LED is designed for use in healthcare facilities, specially for use in patient rooms to facilitate all tasks required by both patient and medical professional.

The LSBF is an LED strip with a flat profile that is available in 4’ or 8' body lengths. It is designed for surface or suspended mounting applications. The LSBF utilizes state-of-the-art LED technology to deliver the highest possible efficiency in the lighting industry.

The BAR was designed to be a vandal resistant surface mount luminaire, with prison grade durability. Engineered with a one-piece design, the BAR brings an additional level of security to prison grade fixtures.

The BAG (up/down) and BAGDL (down only) wall or ceiling fixture combines security features along with diminutive size. Less than 4” deep, a back-pan combined with a one-piece housing maximizes impact resistance and prevents unwanted fixture penetration. Suited for schools, mental health facilities, stairwells, corridors, detention centers, and public transportation areas

MEP offers both Reading and ambient lighting in a beautifully designed fixture. The MEP features innovative optical technology which provides powerful, focused illumination for examinations. Its exemplary design directs the light onto the bed and provides glare-free illumination for both the medical professional and patient. This ergonomical styled design helps bring a relaxed, comfortable feel to any patient room.

The BAF combines maximum security construction features with energy saving technology. UL listed for damp locations; optional wet location under covered ceiling. This surface mounted luminaire utilizes a one-piece housing, security lensing and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. The BAF is ideal for confinement/security applications. Suitable for use in inmate cells, psychiatric wards, secure corridors and general population areas.

The WaveLinx Touchscreen Wall Controller (TSC-E-7) provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 7” [17.8cm] touchscreen features a low-profile design with edge-to-edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The WaveLinx PRO Contact Closure Input Module (CCI-P-V) provides analog devices with an interface and network addressability. It offers two modes : mode one has four inputs for momentary and sustained contact inputs . In the second mode the first channel on the device provides an input to the occupancy sensor. The CCI module communicates with other devices on the network and can easily be managed via the WaveLinx mobile app.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.

The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.

The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.

The CORE Lighting Application (TRX-LGT250) is an intuitive, web-based application that allows facility managers to remotely perform high-level lighting supervisory management tasks, with the power to configure and monitor their WaveLinx connected lighting system. CORE Lighting is hosted on CORE Core (Pro, Enterprise and Virtual) appliances.

The PRO Wallstation (W-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Many wallstation configurations also include scene raise/lower buttons to further adjust the light levels.

The WaveLinx Wired Occupancy Ceiling Sensor - Multi Sensor (OCS-D-P06 / OCS-D-P12) combines daylight sensing and occupancy detection into a single device. The Multi-Sensor communicates over the two wire communication bus and allows for all device settings and groups to be adjusted remotely.

CORE BACnet/IP (TRX-BACNET) Interface enables the integration of the WaveLinx Connected Lighting System with BACnet-compatible Building Automation Systems (BAS). BACnet is a data communication protocol for building automation and control networks developed by the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE).

The WaveLinx Wired Digital to Analog Converter (DAC-DC1 / DAC-DC2) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.

The WaveLinx Wired External Network Aux Power Supply (EXPS-15V) is a system accessory for the WaveLinx Wired Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed. If there are more than 10 wall stations and/or cable runs are greater than 1,000 feet, an External Power Supply is to be used. Each External Power Supply is capable of extending the cable run an additional 1,000 feet, or 10 wall stations.

The WaveLinx Wired DIN Rail System Integrator (SI-2-D-NA) converter for interfacing with third-party devices to and from the WaveLinx Wired network. The SI-2-D enables control of a wide range of equipments and systems such as: audio systems, TVs, projectors, shades, security & fire alarms systems and Building Management Systems.

The WaveLinx Wired Touchscreen Interface (TSI-1-NA) is a module which allows the TSE Touchscreen to connect to the WaveLinx Wired Panel system. With it's integrated timeclock, it can also be used a standalone device to run schedules. The TSI-1 must be installed in a DIN rail enclosure.

As part of the WaveLinx System, the PRO Wireless Receptacle (WR-15/WR-20) enables energy savings by turning OFF the top outlet when the area is unoccupied. The wireless receptacle is automatically paired with all WaveLinx occupancy sensors in a space when it is assigned to an area using the Wavelinx Mobile application. The wireless receptacle uses standard AC power wiring and has an internal relay that will Open/Close the controlled outlet. The use of wireless control features of WaveLinx reduces the wiring needed during installation. Use of the wireless control features of the receptacle also includes power measurement capabilities that can be displayed in the WaveLinx Mobile application.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The WaveLinx Wired Network Communication Cable (LCCP / LCCNP) is used to interconnect Source Controllers and peripheral devices. The cable provides one 18AWG wire pair to deliver power to peripherals and one 22AWG twisted and shielded wire pair to carry data transmissions. Both non-plenum (LCCNP) and plenum rated (LCCP) versions are available.

CORE Public REST API (TRX-API) provides a secure programming interface that enables third-party partners to obtain real-time data from WaveLinx controlled spaces as well as Cooper Lighting Solutions BLE tags. Partners can then use the data to offer value-added solutions that improve business processes and tenant experiences. The CORE Public API interface is hosted on the CORE Core appliances.

The WaveLinx Wired iCANnet to PC Interface (SW-3-NA) provides an interface between an WaveLinx Wired network and a computer running WaveLinx Wired configuration software. This compact versatile unit can be mounted virtually anywhere. The SW-3 includes a PC-NODE, Network Connection Card, phone style connection cable.

The WaveLinx Wired Forward Phase to ELV Power Extender (PE400-1) allows a dimmers power handling capacity to be extended to a full 1000W/VA on 120V input power. It allows a dimmer to dim or switch a fully loaded circuit of electronic low voltage and incandescent loads only.

The WaveLinx Wired Universal Interface Module - Mini (UIM-NA) is a network powered universal interface with six configurable inputs. It can be dry contact closure for scene selection. 1.7" diameter potted PCB with 8" flying leads, designed to fit standard junction boxes and ideal for connection to push buttons, dry contact switches and rocker switches. Does not include LED feedback status indicators.

The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.

The WaveLinx Touchscreen Wall Controller (TSE57) provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.

The WaveLinx Wired Lighting Control Network Jack (LCNJ) is a system accessory to the WaveLinx Wired Lighting Control System. This device allows access to the WaveLinx Wired network while in the space where the lighting levels are being modified. It is preferred to be in the space being modified when setting and saving light levels to create different moods/atmospheres.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The PRO Ceiling Sensor (CWPD-1500), a room based wireless sensor is an integral part of the WaveLinx System and offers Passive Infra Red (PIR) occupancy sensing. They have coverage patterns up to 1500 square feet. The room based sensor is battery powered and is one of the smallest ceiling mounted room based wireless occupancy sensors on the market. The sensor operates on a wireless mesh network based on IEEE 802.15.4 standards.

The WaveLinx PRO Mobile App from Cooper enables users to perform setup, configuration and maintenance of the WaveLinx system from a wireless smartphone or tablet. The WaveLinx Mobile App simplifies setup and configuration of the WaveLinx Wireless Connected Lighting (WCL) system, utilizing our patent pending automatic code commissioning features. It allows users who perform the setup to easily define Areas of the building and drag and drop compatible WaveLinx wireless devices into lighting zones in each area. The automatic code commissioning feature automatically applies a code compliant sequence of operations to each WaveLinx device as they are dropped into a lighting zone in an area. It also allows a user performing setup to make site specific energy code compliant adjustments to the automatic code commissioning settings.

The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.

The WaveLinx Wired Digital Wallstation (FDW) offers the specification grade range of wallstations, which combines the easiest user interface in the industry with a large circular On/Off button, a universal module with up to 10 button configurations, large or small button options and engraving. Designed to fit with standard decorator wallplates, Wallstations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.

The CLS Wallstation is the new standard in intuitive layout and operation with a large circular On/Off button, an universal module with up to 10 button configurations and custom engraving. Each button has a backlight indicator light and offers users with strong tactile feedback. Designed to fit with standard decorator wallplates, CLS Wallstation can be ganged together to meet all project needs.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The CORE Locate Application (TRX-LOCBAS) is an intuitive, web-based, real-time location application that allows authorized user to locate and manage their assets within their spaces. Once indoor positioning specialists use the Locate application to configure the system, users can manage assets and locate their positions in real-time. CORE Locate application and associated services are hosted on CORE Core (Pro, Enterprise and Virtual) appliances.

Create a smart building ecosystem with convenient, out-of-the-box functionality. The WaveLinx Area Controller, 2nd Gen (WAC2) is the main component of the WaveLinx Connected Lighting System, coordinating between the WaveLinx mobile app and your WaveLinx-enabled fixtures and devices. It's remarkably simple to set up and program (without the need for an IT network). Patent-pending code commissioning features also reduce commissioning times by 40%. This 2nd Generation of the WaveLinx Area Controller allows for a more extensive coverage area with its increased performance, including the support of up to 200 devices, and up to 50 areas resulting in up to 2.5% BOM cost reduction.

CORE Locate delivers real-time indoor location service and management by leveraging the CORE smart space IoT platform. It's designed to let you monitor activities by sensing the location of your assets, so staff and patients can use the data to make improvements. Among them: optimized business/production workflows, enhanced safety and heightened security.

The PRO Outdoor Fixture High / Low Mount Sensor (SWPD*) offers passive infrared (PIR) occupancy with a photocell for closed loop daylight sensing. The sensors are IP66 rated for outdoor site and indoor environments with installation heights up to 40 feet and coverage up to 5000 square feet. Easy tool-less fixture connection (Zhaga Book 18 socket) with out of the box controls functionality. Available color options: white, black and bronze.

The WaveLinx CORE Pro (TRX-TCPRO2) is an on-premises hardware platform that hosts the CORE Smart Spaces IoT Platform software applications. The CORE software application provides enterprise-level functionality for WaveLinx Connected Lighting system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 20 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third-party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions.