160 manufacturers · 18,987 products

High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD COM1-WR is a line voltage, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features four digital pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 100 is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. These are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.

DCS Connect with BACnet. 3 x 20 A Relays. 3 x 0-10 V Dimming, Wireless BLE Mesh, Time Clock with Astronomic Funcations. STEINEL's new DCS Connect answers the demand for a cost-effective digital controller that maximizes energy savings while allowing occupants to control their lighting preferences. We made it functional out of the box with predefined and customer use cases. With no front end needed and packed with standard features, this model has BACnet allowing a building intelligence and managment control integration.

Super Duty Power Pack. Manual/Auto (ON) Switching. 20 Amp. Relay. The TR 200 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 200 is a Class 2 Output Power Supply, suitable for parallel interconnection. Wires: All wires have UL Style 1659, 250°C, 600V insulation: • 18 AWG: Black for Line and White for Neutral • 12 AWG: two Red wires for normally closed dry contact from the 20A relay • 22 AWG: 5 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Brown (Communication Link), Gray (Switch Input)

Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150 is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devides. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. Each power pack contains a Mode Switch to select either manual ON or automatic ON operation. In manual ON mode, occupants operate a low voltage momentary switch to turn lights ON.

Super Duty Power Pack. Manual/Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 250 is a full-featured super duty lighting and plug load power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. The power packs switch the load(s) on and off in response to signals from control inputs. The TR 250 contains force on and force off inputs for use with a building management system and an isolated normally open and normally closed relay for signaling a BMS, HVAC controls or other low voltage devices. The TR 250 is a Class 2 Output Power Supplies, suitable for parallel interconnection.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

"Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’. The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold OFF photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

"PIR Wall Switch Occupancy Sensor 2 Button The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’. The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching." The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’.

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 2 Button. The DT VS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Power Pack. Auto (ON) Switching. 20 Amp. Relay. The TR 100-A is a full featured power pack that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 4 low voltage conductors: Red (+24VDC), Black (-24VDC), Blue (Control Input), Gray (Momentary Switch Input)

Power Pack. Auto (ON) Switching, Force ON/OFF, Isolated NO/NC. 20 Amp. Relay. The TR 150-A is a full featured power pack with an isolated relay that provides power to STEINEL low voltage occupancy sensors and other control devices. They are Class 2 output power supplies, suitable for parallel interconnection. The power packs switch the load(s) ON and OFF in response to signals from the control devices. All wires have UL Style 1659, 250°C, 600V insulation: 18 AWG: Black for Line and White for Neutral 12 AWG: two Red wires for normally open dry contact from the 20A relay 22 AWG: 9 low voltage conductors: Red (+24VDC), Black (-24 VDC), Blue (Control Input), Orange ( Force On), Brown (Force Off), Gray (Momentary Switch Input), Yellow (Isolated Relay Common), Yellow with Red Stripes (Normally Open Isolated Relay), Yellow with Black Stripes (Normally Closed Isolated Relay)

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The DT VS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 1 Button. The DT VS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR Wall Switch Vacancy Sensor. 1 Button. The IR VS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming.Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small offices, conference rooms or break rooms. For best performance use this sensor in enclosed spaces no larger than 20’ x 16’. The DT WLS 2 is a line voltage, two relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold OFF photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR. 0-10 Volt Dimming. Wall Switch Occupancy Sensor. The IR WLS DIM is a line voltage, Passive Infrared (PIR) wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. Control options via Smart Remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Occupancy Sensor. 1 Button. The DT WLS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) wall switch occupancy sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

PIR. 0-10 Volt Dimming. Wall Switch Vacancy Sensor. The IR VS DIM is a line voltage, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. Control options via Smart Remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

PIR Wall Switch Occupancy Sensor. 1 Button. The IR WLS 1 is a line voltage, single relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold OFF photocell daylight option will keep the lighting load off if the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for pier to pier grouping achieving expanded detection zones and multiway switching.

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro COM1-WR is a line voltage passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides additional convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

Dualtech PIR & 40 kHz Ultrasonic Wall Switch Vacancy Sensor. 1 Button. The DT VS 1 is a line voltage, single relay, Dual Technology (PIR & ultrasonic) vacancy (manual ON) sensor intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to maintain the load ON with either or both technologies. The convenient "Switch Link" feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

PIR Wall Switch Occupancy Sensor. 2 Button. The typical application is for bi-level switching in small office, conference, and break rooms. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’. The IR WLS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch occupancy sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The hold off photocell daylight option will keep the lighting load OFF when the light level is greater than the threshold level setting. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

SENSORWORX wireless power pack controllers switch on/off power to a connected lighting load as directed by wirelessly linked sensors and wall controls. Additionally, the unit’s 0-10V dimming option greatly simplifies applications where dimming control from multiple switch locations is required. For applications where a hybrid wireless/wired architecture is desired, this wireless power pack can also be ordered with auxiliary low voltage connections. The SENSORWORX wireless power pack is rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

SENSORWORX line voltage photocell and daylight harvesting sensors provide a compact control solution without requiring a powerpack. Basic on/off units are capable of directly switching lights off when ambient levels are high enough that desired overall light levels will be still be maintained. Lights will be switched back on once ambient level falls below the desired setpoint. Units with the daylight harvesting (dimming) option track a space’s overall illumination and dim connected lighting to achieve energy savings. During times of high daylight contribution to a space, controlled artificial lighting will be gradually dimmed to a minimum dimmed level. During times of no or low daylight contribution, controlled artificial lighting will increase back up to its maximum level. The sensor can also be configured to switch lighting off completely in maintained high daylight conditions. Additional configurable parameters include high & low trim levels and fade rates. All photocells provide the option of selecting the ambient light threshold (e.g., setpoint) from a range of preset values or running an auto-selection mode where the unit will determine the setpoint based on the measured amount of light it is controlling.

The SENSORWORX line voltage wall switch & 0-10 volt dimmer provides a stylish solution for spaces where manual dimming control is required. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection. For dimming adjustment, intuitive raise and lower buttons are present in addition to the on/off button. Five vertically stacked LEDs are provided to indicate the current dimming level. Configurable dimming parameters include High/Low Trims, Turn on Levels, and Curve Types. This dimmer also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

​The SENSORWORX wireless wall switch load controller links to remote occupancy sensors and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical dimmers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SENSORWORX family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.

The SENSORWORX family of line voltage ceiling mount occupancy sensors provides a compact control solution capable of switching lighting loads without requiring a powerpack. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions.

The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in a addition to an on/off button.

SENSORWORX power packs transform incoming line voltage power to low voltage as needed by sensors or other control devices. Additionally, they switch on/off power to the connected lighting load as directed by the sensors and controls. SENSORWORX power packs utilize a powerful microprocessor to optimize its switching timing in order to ensure long relay life even when controlling high-inrush LEDs and ballast loads. As with all SENSORWORX products, these power packs are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple and an optional snap-on low voltage wire chamber make for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.

The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost-effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.

Easily adjustable compact digital ceiling sensor that excels due to its ability to utilize an industry leading mobile app to provision and troubleshoot. The mobile app allows contractors and technicians cut onsite time through an intuitive interface that provides active sensor feedback and provisioning flexibility. The device’s slim form factor provides a sleek aesthetic that blend into the ceiling maintaining the spaces visually appeal.

Heavy duty switchpack capable of switching 20A loads. Providing 24VDC regulated output to sensors, the heavy duty switchpack provides 150mA rating, capable of power multiple sensors from a single device, while the onboard form C relay provides HVAC tracking BAS outputs for easy integration.

The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.

The PRO Wallstation (W-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Many wallstation configurations also include scene raise/lower buttons to further adjust the light levels.

The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.

The PRO Tilemount Sensor Kit (WTA) provides PIR occupancy, daylight dimming and control for connected downlight luminaires or other luminaires that do not support the WaveLinx Integrated Sensor. The Tilemount Sensor Kit provides 0-10V dimming control of LED and non LED loads for 120-277V 3 amp luminaires.

The WaveLinx LITE Industrial Sidecar Sensor Kit (WIM-WH-SKIT) is an integral part of the WaveLinx Lite Connected Lighting System and offers 120-277VAC 6-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx LITE Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx PRO Industrial Sidecar Sensor Kit (SWPD*-WH-SKIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous dimming of 0-10V LED luminaires. The intended use of the Sidecar Sensor Kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx integrated sensor. Adding the WaveLinx Industrial Sidecar Kit requires access to fixture internal components and should only be used by qualified professionals – consult fixture manufacturer for safety and warranty impact.

The WaveLinx DALI Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.

The LITE Wireless Tilemount Sensor Kit (WTK) is an accessory to the WaveLinx LITE (WLC) system which may be used with out-of-the-box functionality or commissioned via the WaveLinx LITE mobile application. The wireless tilemount sensor kit is typically used to provide occupancy sensing and daylight dimming for luminaries that cannot include integrated occupancy and daylight sensors.

WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.

The PRO Wallstation (WW-Series) is a wireless, 120/277 VAC powered wallstation with configurable buttons featuring on/off, raise lower, and preset scenes options. Each button’s actions are configurable using the WaveLinx app. The PRO WW-Series Wallstation’s elegant design enhances the aesthetic of a space while allowing occupants to adjust the room’s brightness levels based on their sensitivity and needs. The wallstation uses a 2.4 GHz IEEE 802.15.4 standard based radio to form a wireless and reliable mesh network with other PRO devices and WaveLinx Area Controller.

The WaveLinx PRO Tilemount Sensor Kit Without Control Module (WTE) provides motion sensing, daylight dimming and real-time location data. The external plenum rated power supply, WLX-PS-SENSOR, can be used to power the WaveLinx Wireless Tilemount Sensor Kit and the low voltage power supply can power up to 16 sensors. Multiple pre-terminated plenum-rated cable options are also available to simplify the wiring.

The LITE Line Voltage Wallstation (WWL-Series) is a multi-scene, single area dimming wallstation which provides customized light level for an area. The wallstation is an integral part of the WaveLinx LITE system and is available in small and large button configurations. These wallstations are mains (120-277VAC) powered and provide wireless control of the lighting in an area. The wallstations operate on a wireless mesh network based on IEEE 802.15.1 (Bluetooth® 4.2 Low Energy) standards.

The WaveLinx PRO Industrial Standalone Sensor Kit (SWPD*-KIT) is an integral part of the WaveLinx Connected Lighting (WCL) System and offers 120-277VAC 8-amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The intended use of the kit is to provide daylight dimming and control for industrial luminaires that do not support the WaveLinx Industrial integrated sensor. Alternatively, the WaveLinx Industrial Standalone Sensor Kit can provide occupancy inputs to the WaveLinx system when not directly connected to loads.

• Bi color Red/Green LED’s • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 1.2V 900mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed • The battery operated emergency exit lights are the perfect solution for applications that require both an exit sign and an emergency light.

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

• AC input voltage range: 100-277V • Low power consumption and high reliability • 8-15s delay when turn off • Strong anti interference ability • Switch life is greater than 5000 cycles • Approved application patent • Suitable for dry and humid environment

• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed