Line Card
160 manufacturers · 18,987 products
Search
Product TypeHardware & Accessories (319)▾
319 products · Hardware & Accessories
Start and extend rows of connected LED lights with these practical accessories. Item required depends on number and type of fixtures in light string.
This 4″ recessed panel trim is compatible with our DRR4-CC recessed fixtures.
This 4″ recessed panel trim is compatible with some of our recessed fixtures.
This 6″ recessed panel trim is compatible with our DRR6-CC recessed fixtures.
This 4″ recessed panel trim is compatible with some of our recessed fixtures.
This 4″ recessed panel trim is compatible with our DRR4-CC recessed fixtures.
Our complete line of accessories will answer all your conception needs.
Sure-Lites Pendant Kits are available for pendant mounting of exits. Each kit includes canopy, mounting hardware, threaded stem and attachment bracket. No electrical components are included. The CAX Series Pendant Kit may require CAX Series Splice Box.
Lens clip accessory for PAR20, PAR30 and PAR38 lamps. Attached directly to the lamp and accepts one or two media. Use with a broad range of optical filters, theatrical tinting color lens and louvers to provide additional light control and artistic expression. Use with Portfolio 4", 6" and 7" directional PAR lamp fixtures.
Metal trim rings provide strength and durability and are available in various painted and plated finishes. Use with most Portfolio 4", 6" and 7" reflectors with removable polymer trim rings.
Feeds power to Industrial HID and fluorescent lighting fixtures wired with Drop SO cords (DS) or Drop cables (DC). Provides circuit selection at each fixture and allows fixtures to be disconnected without interrupting power downstream. All unused outlets require a MWS dust cover.
Supplies power to out-of-system units that are wall-mounted or ceiling-mounted. MWS Drop cables may be plugged into the last component, Splitter (SP) or Circuit T (CT) anywhere within the system.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations.The MWS Drop Cable with DALI Control (DC-5LT) feeds power and control to wall or ceiling fixtures from a compatible Circuit T (CT) or Splitter (SP). See the CT or SP specification sheets for compatibility details.
Used to feed Industrial HID and fluorescent lighting fixtures in open ceiling construction from a Circuit T (CT) or Splitter(SP). Fixtures wired with MWS Drop SO Cords can be disconnected under load for repair or relocation without interrupting power down line.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Drop SO Cord with DALI Control (DS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Circuit T (CT). See the CT specification sheet for details on compatibility. Fixtures wired with MWS DS-5LT can be unplugged under load without interrupting power or control to downstream fixtures.
Continues the system between MWS components that interface with light fixtures, switches and convenience power outlets. Any MWS cable component may have length added with an Extender Cable. All unused outlets require a MWS dust cover.
The MWS Fitting Cable (FC) continues power from the Starter or switch drop to the first lighting fixture and between lighting fixtures. The line side connector snaps into any 1/2" knockout and has 6" #18 leads to connect to fixture wiring. MWS Fixture Cables may have length added with an Extender Cable. All unused outlets require a MWS dust cover.
Feeds Industrial HID and Fluorescent lighting fixtures in open ceiling structure while allowing the circuit to feed through to the nest fixture. All unused outlets require a MWS dust cover.
The MWS Fixture Fitting (FF) or Power Fitting (PF) feeds power to lighting fixture while allowing the circuit to feed through to the next fixture. Tap leads on FF are 18ga, tap leads on PF are 12ga.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Fixture Fitting with DALI Control (FF-5LT) feeds power and control to any lighting fixture, while allowing the power and control to feed through to the next fixture
The MWS Starter Fixture Cable (SF) starts the MWS system immediately at the electrical junction box or at the switch box and continues to the first lighting fixture. Subsequent fixtures connected to the Starter Fixture Cable are wired with standard Fixture Cables(FC). The line side connector installs into any 1/2" knockout and has #18 tap leads to connect to the fixture wiring. All unused outlets require a MWS dust cover.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control (TC-5LT) feeds power and control wiring to wall or ceiling fixtures while feeding downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-5LT. See the Extender Cable specification sheet for compatible models.
Feeds power to wall mounted or ceiling mounted fixtures and convenience outlets while feeding circuits downstream to another electrical component. MWS Extender Cables feed power to each T Cable. All unused outlets require a MWS dust cover.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control Only (TC-PP5LT) feeds only the control wiring to wall or ceiling mounted DALI controls, while feeding both power and control downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-PP5LT. See the Extender Cable specification sheet for compatible models.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T SO Cord with DALI Control (TS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Extender Cable (EC). See the EC specification sheet for details on compatibility.
Introduces local switching into the MWS system. Switch Drops may be installed during rough-in or renovations. Extender Cables bring power from starters to the first Switch Drop and between consecutive Switch Drops. Switch Drops can also be connected together for multiple switch locations. All unused outlets require a MWS dust cover.
The MWS Starter Fitting is the starting point for the MWS system. The Fitting is installed in a standard 1/2" knockout of an electrical unit. The Starter Fitting is mounted externally and does not impact wire fill. All unused outlets require a MWS dust cover.
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter
The MWS Splitter (SP) adds an additional power out at any point within the MWS system. All unused outlets require a MWS dust cover.
The Tandem In-Line Wiring option provides factory installed wiring when fixture sections are applied in pairs, and require left/right lamp switching. To explain, ballast receive their power from the circuit, with lamps getting their power from the ballast. TILW is the method of applying power from the ballast to specific lamps. TILW only applies to 2 or more lamp cross sections. If the luminaire has only one row of lamps, TILW is already present and unnecessary to specify. The TILW option is available on IA/IC, DI/DIM/DIVM, EI/EIM/EIVM, SS, SSL, SN, SNSM, SNRA, STN, STM, STW, RCG, P410, UT, I5 and BSX. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
Cooper Lighting's Modular Power Supply allows external fixture access for safe and easy installation and service. There is no need to remove lamps or reflectors to disconnect fixture power with the Modular Power Supply. Access to the individual fixture's power supply allows servicing without turning off all the fixtures disrupting occupants. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
The Plug-In System provides factory installed branch circuit wiring and plug-in connectors when row mounting fixtures. This labor and time saving option is designed to simplify fixture installation and wiring and allows fixtures to be installed quickly and easily. The PI system is available for fixture sections up to 8' in length for continuous row wiring by simply plugging the sections together. Each PI section is factory wired to the ballast leads and color coded for easy circuit identification. Standard PI system harness contains no separate groundwire, with ground provided by the fixture body. An option to the system provides a separate ground wire in the harness where required. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
Cambria 213 is an ultra-compact low voltage LED and halogen MR16 fixture. It features a unique hanging design that allows placement where standard mounting methods are not possible. Various lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects.
Lumiere lenses and louvers maximize your design alternatives. Each performs a unique task, allowing you to tailor your design to the job at hand. They secure to the interior of the fixture hood behind the lens by an easy-to-use snap ring. Most Lumiere fixtures accept a combination of up to three lenses, louvers, and color and dichroic filters.
Lumiere offers a variety of surface, wall, and tree mounting accessories. All are equipped with a standard 0.5-inch NPS threaded mounting hole to accept fixtures with 0.5-inch NPS threaded stems.
Coronado 812 is a compact line voltage fixture for use with PAR38 halogen lamps. The fully adjustable mounting stem provides 340° tilt and 360° rotation for easy aiming. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects.
Lumiere color and dichroic filters maximize your design alternatives. They secure to the interior of the fixture hood behind the lens by an easy-to-use snap ring. Most Lumiere fixtures accept a combination of up to three lenses, louvers, and color and dichroic filters. Color filters allow for the creation of spectacular lighting effects. You can even use mercury vapor color filters to blend other lamp types with fixtures that use a mercury vapor light source. Dichroic filters provide the best in exacting color rendition.
Monaco 2003 is an extremely compact and attractive MR16 low voltage fixture. The fully adjustable mounting stem provides 200° tilt and 360° rotation for easy aiming. Vertical and horizontal aim-locking mechanisms are standard. Various lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects. Lumiere's exclusive Siphon Protection System (S.P.S.) prevents water from siphoning into the fixture through its own lead wires.
Cambria 206 and 206-2 are single head or dual head small dimmable LED or MR16 low voltage pathway luminaires. Each model attaches to an extended length-mounting stem and delivers 340° tilt and 360° rotation from any mounting position. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects. Lumiere’s exclusive Siphon Protection System (S.P.S.) prevents water from siphoning into the fixture through its own lead wires.
Coronado 806 is a ultra-compact line voltage fixture for use with PAR20 halogen lamps. The fully adjustable mounting stem provides 340° tilt and 360° rotation for easy aiming. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects.
The Lumière Eon 303 Pathway luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is made from machined aluminum, contains a sealed optical compartment and mounts to an integral recess junction box creating an IP66 rated fixture that will look and perform great for years. The Eon Pathway luminaire is ideal for walkway applications where mounting heights of 26 inches or less are desired and greater lateral or forward throw illumination is needed.
SD2925 is a screwdriver for tamper resistant screws supplied with H2925 and H2926 brick lights.
Set of 4 coil springs for use with 301, 310, 401 and 426 trims in the H7 recessed housing family.
H1999 Socket Extender is for use with selected trims and housings to extend the lamp 1” (25mm).
The Distributed Low-Voltage Power System utilizes pre-terminated low-voltage lighting cables for safe, flexible LED lighting installations. Low-voltage lighting cables provide for fast, error free installation of LED light fixtures. Cables are available in pre-terminated lengths typical to application / fixture type for error free connectivity of Class 2 circuits in plenum rated applications.
Pre-terminated Control Cable, couplers and splitters connect the Room Controller or DLVP power module and devices simplifying the Click & Go connection enabling automatic functionality upon power up. Cables are pre-terminated with industry standard RJ45 connectors.
TheAria Wireless DMXsystem is a compact, local, outdoor-rated wireless DMX system. The Aria transceiver can act as both the sending and receiving point, and you can select up to 15 channels on the 2.4 GHz band. The internal wireless radio features both automatic networking and signal routing optimization to ensure the best possible reception of DMX data. A 5dB, omni-directional antenna is included, which provides transmission up to 2600’ line of sight and 300’ between obstructions and walls. Aria can also make a direct connection (without the need for an additional unit) to compatible fixtures such as the Dyna Drum HO, Dyna Drum SO, Dyna Accent, and Dyna Accent Mini which have the internal receiver built-in. Over the air Transmit DMX control signal up to 2,600' (line of sight) and instantly connect to any Aria Direct Connect fixture Link 'em up Up to 250 connection points in a system and utilize up to 8 universes with multiple transmitters Ready for the elements IP66 (wet location) and IK07 impact protection standard
ThePharos LPC X(Lighting Playback Controller X) offers an extreme level of power and integration, making it an ideal solution for landmark lighting installations with significant channel counts. It integrates with the full range of Pharos products and offers an optional real-time video input.Stay in control 10 to 100 universes. Designed to run 24/7. Dive into the details Windows and Mac compatible Designer 2 software application opens up a world of advanced programming options Get in touch Optional TPS wall-mounted touch panel makes it easy to interact with your lighting
Flex Dual Channelis a clean, anodized aluminum channel that allows you to mount three parallel runs of Flex tape and direct their output in opposing directions (usually up and down). Opal polycarbonate lenses help to homogenize the output. Compatible with: Flex One HO Interior Flex One SO Interior Flex Eco Interior Ai Flex Flex Spectrum Interior
Flex Channel Tall Profile is an aluminum mounting channel for Acclaim Flex tape products. It comes as a 4' section, and you can attach it to the mounting surface directly with screws or optional brackets. The system also has optional end caps, joiner clips, and lenses. Compatible with: All interior tapes, all exterior tapesEXCEPTFlex Spectrum exterior.
TheFlex 45 Degree Channelis an anodized aluminum channel which allows for a 45 degree mounting of interior Flex Tape products, in conjunction with optional lenses. Compatible with: Flex Spectrum Interior Flex Eco Interior Ai Flex Interior Flex One HO&SO Interior
The Flex Mini Channel is an anodized aluminum channel for Acclaim Flex Interior products. It features a low profile design that can also accept clear, frosted or opal lenses. Compatible with: Flex One HO Interior Flex One SO Interior Flex Eco Interior Ai Flex
TheArt 500is a touch panel DMX Controller with 1,024 DMX channels and 500 programmable scenes, designed to be the mosteffective control solution for architectural control. Included is the ART 500 software package, which offers an easy to navigate interface, combined with powerful control features. Stay in control 1024 DMX control channels and up to 500 presets Dive into the details PC and Mac compatible software applications open up a world of advanced programming options Get in touch Wall-mounted touch panel makes it easy to interact with your lighting