160 manufacturers · 18,987 products

The durable HALO 808 High Performance offers reliable, low-glare, high-power beam performance for accent and display lighting. Featuring high-efficiency LED technology with precision aluminized reflector optics, the 808 delivers energy-saving economical accents to modern spaces. The 808 was engineered to provide exceptional lighting with up to 3,350 lumens and over 35,700 candela of beam power. The beam distribution can also be customized with media, supporting up to two pieces with the media snoot.

ESF twin head LED Security Floodlight provides energy-efficient, low maintenance lighting solution for outdoor areas. Available in 1420 lumen and 2372 lumen Flood, Dusk-to-Dawn, or Motion activated fixture. Integrated LEDs are rated at 50,000 hours of maintenance free operation. This flood light is ideal for walkways, yards, patios, play areas and driveways creating an inviting exterior space as well as providing safety and security. Diffused lens is fully gasketed to keep out moisture, dirt, bugs and other contaminants. Available in white and bronze finish.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Adjustable flush gimbal trim is designed for use with IC or Non-IC AIRTITE™ 3" Halo small aperture line and low voltage housings. This die-cast trim is available in multiple finishes to match interior decor. Adjustable gimbal trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 35° tilt, and –15° reverse tilt and 360° orientation within housing.

Adjustable pinhole with specular clear reflector designed for use with IC or Non-IC AIR-TITE™ 3" Halo small aperture line and low voltage housings. Trim ring is available in multiple finishes to match interior decor. Pinhole trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 15° tilt, and 360° orientation within housing.

Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each circuit can be independently switched. Provides maximum flexibility, with a miniature profile. Suitable for a wide range of commercial, merchandising and residential applications. Join three trac sections with left hand polarity with the Left T Connector.

The Classic pendants family from Halo includes 5 different styles with glass or metal shades. Clean simple lines blend with a variety of interior spaces and provide effective task or accent lighting. The shapes include soft cones, cylinders and tall cones of cased glass in white, amber or blue. These line and low voltage Cylinder Pendants use MR16, T4, A15 or G16.5 lamps.

Smart control made simple. The Pure Smart™ Wi-Fi ON/OFF Switch upgrades any standard light to smart functionality with no hub required. From the wall, the app, or your voice, control traditional lighting loads with ease — while unlocking scheduling, grouping, and automation through the WiZ ecosystem. Designed for pros but simple enough for anyone, this switch brings smart convenience to every room.

Adjustable square baffle designed for use with IC or Non-IC AIR-TITE™ 3” Halo small aperture line and low voltage housings. This die-cast aluminum trim is available in multiple finishes to match interior decor. Trim uses low voltage MR16 or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 15° tilt and integral 350° lamp holder rotation with locking thumbscrew. The trim construction allows use with the Halo H3 series of standard round aperture housings.

The ESF WiZ LED floodlight incorporates WiZ smart lighting control into a durable, twin head design for an advanced smart outdoor lighting solution built for high performance. Featuring a multitude of configurable settings including grouping, scheduling, dimming, white tuning and color tuning, the ESF WiZ does not require a hub and can be wirelessly controlled directly from any compatible smart device utilizing the WiZ app.

Adjustable Coilex® baffle trim designed for use with IC or Non-IC AIRTITE™ 3" Halo small aperture line and low voltage housings. Trim ring is available in multiple finishes to match interior decor. Baffle trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 35° tilt, and 360° orientation within housing.

HALO LTE LED Trims are an economical version of our LT Series with the same non-conductive, dead-front baffle trim and flat, diffuse lens design. Available with dedicated 3000K CCT and flicker-free dimming to 10% in convenient bulk packs. Suitable for new construction, remodel, and retrofit installation in IC (insulation contact) or non-IC housings. These fixtures meet AIR-TITE and code compliance for additional energy savings. LTE Bulk Packs are an excellent choice when you need a low-cost alternative to HALO LT or RL Series.

These canless LED downlights deliver fast, efficient installation without the need for a recessed housing, mounting directly into the ceiling for both remodel and new construction to save time and reduce labor costs; now featuring patented Flip-N-Klip™ Locking Springs, they lock upright during installation and removal to help prevent painful snap-back while improving control and safety; the low-profile design fits tight spaces without sacrificing performance, providing bright, crisp 90+ CRI light with field-selectable color temperature and Dim-to-Warm capability to fine-tune any environment; with long-life performance, flexible configuration, and installer-focused innovation, RL remains a reliable, cost-effective lighting solution.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Live-end feed for TEK4 two-circuit / two neutral 120V 20 Amp track. Multiple breaker sizes are available. Can be utilized on hard or grid ceilings. Can be used with pendant suspended track. Breaker can be used as an on-off switch. Approved by the California Energy Commission - meets Title 24 requirements. cULus Listed.

Miniature size, decorator finishes, push-in connectors, Economy, all combine to make single-circuit Miniature Trac perfect for residential or commercial use. To ensure safe operation the entire track system is fully polarized and grounded. Miniature Trac is available in six finishes to meet any decorating need: White, Matte Black, Antique Brass, Polished Brass, Bronze and Silver. L's, T's and X's allow track to be assembled in almost any pattern.

Versatility has always been the hallmark of track lighting. The modular construction of track and the adjustment capabilities of the trackheads allow the ability to place light exactly where needed and to easily adapt to changing display needs and retail and hospitality configurations.

The HLC Tapered Disk Lights deliver a low-profile, flush ceiling finish with ultra-fast installation from below the ceiling. Designed for high-volume residential applications, they mount directly to compatible junction boxes with no clips or plates required. The twist-release lens allows quick access to the 5-position CCT switch, making color selection simple. Available in economical bulk packs for streamlined contractor installs.

With sleek simple lines, numerous beam distributions and color temperatures, and all-encompassing light output levels, Stasis gives the flexibility to create spaces that draw clout, foot traffic, sales and good reviews.

The HALO Outdoor™ LED Wall Pack Series incorporates advanced LED technology and optical design to bring you a slim-profile luminaire with uncompromising performance. Multiple control options are available, including integral photo control for dusk-to-dawn operation and flood for switch control. This fixture provides area coverage equivalence up to 100W Metal Halide while achieving substantial energy and maintenance savings. Perfect for illuminating residential, light commercial, apartments and hotel buildings.

HALO Outdoor’s new patent-pending LED Area and Wall Light combines high performance optics with super bright energy-efficient LEDs. Its rugged user friendly construction has a dusk to dawn photocontrol for nighttime ON and daytime OFF settings that provides a reliable security solution. This fixture provides larger area coverage than standard 84W CFL, 175W mercury vapor and 300W incandescent area lights while achieving substantial energy and maintenance savings. Perfect for illuminating large areas like barns, side roads, pathways or security lighting.

The Diverge™ off-grid lighting system is a portable solution, utilizing rechargeable lithium-ion battery technology and multiple charging options for a wide range of applications. Delivering an impressive 2400 lumens at full charge, the fixture offers an integrated dimming control, 360 degree motion sensor, polycrystalline solar panel with 20' cord and two USB interfaces for charging purposes. Suitable for storage, marine, remote location and area lighting where 120V wiring is not available.

100 Watt vapor tight floodlight. Vapor tight incandescent light with bulb guard and 1/2 conduit openings on top and sides.

The Receptacle Rated Switchpack includes a 20A relay for ON/OFF control of connected outlets. The Receptacle Rated Switchpack connects to the Greengate Room Controller, DLVP power module, or any standard Greengate Occupancy Sensor. This powerpack provides energy-efficient control of receptacles.

The Passive Infrared Single Level Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The VNW-P-1001-MV uses Passive Infrared (PIR) sensor technology to monitor a room for occupancy and deliver maximum energy savings. The lights are turned ON by pressing the universally recognized light icon pushbutton. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Ethernet Interface Module (EIM) provides secure serial-to-ethernet data transmission to enable data exchange between Keeper Enterprise, Greengate programming software application, and the Greengate panels. The device supports the SSL and SSH protocols, which work by encrypting data before sending it over the ethernet network.

The 0-10V Decorator Dimmer provides full-range classic linear-slide dimming for 0-10 Volt compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. Units feature a preset “ON/OFF” switch that automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The ONW-D-1001-DMV-N combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The OSW-P-0801-120 Passive Infrared Single or 3-way Occupancy Sensing Wall Switch is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. The distance between segments increases the farther you are from the sensor, so motion has to be larger the farther you are from the unit. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain ON as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out.

Available in both a network and stand-alone architecture, Room Controller offers code-compliant lighting, emergency, and plug load control out-of-the-box when connected to Room Controller low voltage devices. The system includes three relays and up to three 0-10 VDC dimming outputs to control compatible dimmable ballasts. Network up to 254 ControlKeeper and Room Controller Network panels.

Dual Relay Switchpacks provide 24 VDC operating voltage to all low voltage, 24 VDC, Greengate occupancy sensors and day lighting controllers. These powerpacks can be used where two circuits need to be controlled at the same point. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. MicroSet self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period.

The Multi-load Decorator Dimmer provides full-range classic linear-slide dimming for 300W dimmable LED and CFL as well as 600W Incandescent, Halogen, Dimmable Fluorescent, Electronic Low Voltage & Magnetic Low Voltage light sources. Preset units feature a preset “ON/OFF” switch that automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-Pole (one location) and 3-Way (multi-location) applications, and features an adjustable Rapid-Start setting which provides additional power for a brief time period to ensure lamp start-up at low dim settings. Compatible with any decorator wallplate. Compatible with most dimmable LED and CFL lamps. Adjustable rapid start feature ensures lamp start-up even at low dim levels.

The TracKeeper™ current limiting panel for track lighting allows designers to easily meet energy codes. Limiting the branch circuit volt-ampere rating with the TracKeeper™ provides you with a fixed power consumption limit for your installation as opposed to calculated values based on watts per linear foot of track. Additionally, the use of high efficiency luminaries will often yield a lower watts/linear foot number than is specified in the code. Available in either 16 or 32 circuit panels.

The Passive Infrared Low Voltage Occupancy Sensing Wall/Corner sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

Instead of pulling line-voltage to low-voltage transformers installed every few feet, bring line voltage to the DLVP power module and pull pre-terminated, low-voltage cable to every fixture, sensor, control, and receptacle control in a space. Available in 2 power levels (300 and 600W), UL924 listed, and pre-assembled, DLVP delivers out-of-the-box, “plug and play” code compliance.

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

The Input/Output Device (OCC-RJ45) provides connection of any Greengate low voltage occupancy sensor, or other low voltage maintain closure, to the Room Controller or DLVP power module to define the occupancy state of the space. The OCC-RJ45 also can be used as an output to the HVAC system, third party systems or Switchpacks based upon room occupancy status.

The External Power Supply is a system accessory for the Greengate Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed.

Pre-terminated Control Cable, couplers and splitters connect the Room Controller or DLVP power module and devices simplifying the Click & Go connection enabling automatic functionality upon power up. Cables are pre-terminated with industry standard RJ45 connectors.

The OSW-P-1001-MV Passive Infrared Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as one of the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with Incandescent, LED, Fluorescent, CFL, MLV, ELV or 1/2 HP motor load.

The 0-10 Volt Slide Dimmer provides full-range classic linear-slide dimming for 0-10V compatible dimmable light sources. These units are ideal for light commercial applications and are compatible with decorator style devices and wallplates. The preset “ON/OFF” switch automatically returns controlled light(s) to a preset level without disturbing the brightness level. The device is designed for both Single-pole (one location) and 3-way (multi-location) applications.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. The ONW-D-1001-MV-N combines Ultrasonic and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.

Combining the functionality of a switchpack, a sensor, and a 0-10V dimmer, this convenient wallbox device saves labor costs and reduces installation times. What's more: it meets all the latest energy codes and standards, including Title 24.

The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems

The MicroSet Ultrasonic Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The ultrasonic sensor uses the Doppler principle. It produces a low intensity, inaudible sound and detects changes in sound waves caused by motion, such as walking into the room, reaching for the telephone, or turning in a chair. They are volumetric in nature and therefore not line-of-sight dependent. Since they fill the space with these sound waves, they are excellent in bathrooms with stalls, enclosed hallways, or other oddly shaped rooms. In addition, they are much more sensitive to smaller motions. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology Dual Relay Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Dual Technology sensor’s combination of Ultrasonic and Passive Infrared technologies offers the most complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy savings. The OAWC-DT sensors are also equipped with MicroSet self-adjusting technology which provides an adaptive and airflow tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Self-adjusting Dual Technology sensors drastically simplify and reduce a contractor’s installation and adjustment time period. Manual On feature for use with 1 or 2 momentary switches controlling 1 or more Switchpacks.

The Passive Infrared (PIR) Single Relay Vacancy Sensing Wall Switch with Night Light is a lighting control and wall switch all-in-one that is used for energy savings and convenience. VNLW-P-1001-MV-N is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. The night light activates when the sensor turns the lights OFF. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Passive Infrared Low Voltage Occupancy Sensing Wall Switch is a motion sensing lighting control and that is used for energy savings and convenience. The wall switch that utilizes an isolated Form-C relay that integrates directly with lighting control, building, and HVAC systems. The ONW-P-1001-SP is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end user awareness and reminding individuals to take control of their lighting to maximize energy savings. HVAC mode allows the load connected to the Form C BAS relay to remain ON when the lights are turned OFF manually.

The TSW-MV is ideal for conformance to energy codes where assurance is needed that lights are turned OFF when not in use and an occupancy sensor is not the best application.

The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.

The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.

The Heavy Duty Switchpack provides 15 VDC operating voltage to all low voltage, 15 VDC, occupancy sensors and daylighting controllers. A single powerpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits. Isolated contacts may also be used to control HVAC, contactors, motors, etc.

The Dual Technology Single Level Occupancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The ONW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR)sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application.

Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.

The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.

Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.

The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.