160 manufacturers · 18,987 products

5.8 GHz High Frequency Fixture Integrated 360° Sensor. The HFLUM2-WR is a line voltage occupancy sensor module that installs in a fixture, adding energy saving lighting control in each fixture location. The HFLUM2-WR uses STEINEL’s High Frequency (HF) technology to turn lights on and off based on occupancy. It works by emitting high frequency electromagnetic waves (5.8 GHz) into the controlled area. Movement in the area causes a change in the waves’ echo, resulting in occupancy detection. The sensor can detect motion through many materials including glass and the lens of a fixture, enabling the sensor to be hidden from view.

PIR Presence Detector. Wall or Ceiling Mount. The IR CM COM1-24 is a low voltage passive infrared corner mount presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features a pyroelectric detector with a high performance lens system creating 520 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The convenient "COM-Link" feature enables multiple sensors to link together via the communication link for peer to peer grouping achieving expanded detection zones with convenient control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience.

PIR High Bay 360° Sensor. (Individual). The HBS 300 (347-480V) High Bay Occupancy Sensor provides 360 degrees of occupancy based lighting control in 347/480 VAC, 60Hz high bay open area applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300 (347-480V) is able to achieve 1416 switching zones.

COEUS ™ (pronounced See Us) is the STEINEL America proprietary building intelligence and centralized control management platform. COEUS software provides reporting, analytics, lighting management and works in conjunction with the DCS Connect. The DCS Connect is our digital control solution controller with BACnet, that allows communication and to operates within the building IoT. COEUS communicates with the DCS Connect via BACnet, integrating into the building for full control in one centralized platform via open protocol on the network VPN allowing for secure remote access. The COEUS solution runs on an on-site pc. There is also a new tablet package, opening up touch screen lighting control as an option to work with our digital controls for easy and sleek lighting scenes. Coeus was the Titan god of intelligence and foresight, who gained great knowledge to see past the obvious. He was the Titan of the North pillar connecting the earth to heavenly knowledge and the North Star. STEINEL America’s COEUS is your guiding light, providing data and analytics to see beyond the obvious and bring intelligence to buildings

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro COM1-24 is a low voltage passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

IP65 Wet Location. PIR High Bay 360° Sensor. (Individual). The HBS 300-WL sensor provides effective lighting control in areas requiring a 360 degree occupancy detection pattern. Best practice for high/low bay open areas requiring IP65 wet location rating. Ideal for warehouses and general damp or wet unconditioned storage areas. The sensor performs at a wide range of mounting heights, up to 45 ft. The EM1 Extendor Module mounts directly to a lighting fixture or junction box. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300-WL is able to achieve 1416 switching zones with best in class radial and tangential detection..

IP65 Wet Location. PIR High Bay Aisle Sensors. (Individual). The HBS 200-WL sensor provides effective lighting control in damp or wet locations. Coverage specifically designed for aisle occupancy detection. Can be used in a wide range of applications that require an IP65 rating. Best practice for unconditioned storage areas, warehouse aisles or any spaces requiring linear detection pattern. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of a fixture is located greater than 1/2" from the bottom edge of the fixture.

PIR Presence Detector. Wall or Ceiling Mount. The IR CM DIM-24 is a low voltage passive infrared corner mount presence detector setting a new standard in lighting and 1-10 volt dimming control with minimal movement required for human presence detection. Provides for superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as occupancy is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness. After the Stay ‘ON’ time DIM before ‘OFF’ delay has expired, the light turns off. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for peer to peer grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience.

Dualtech PIR & 40 kHz Ultrasonic Presence Detector. Wall or Ceiling Mount. The DT CM DIM-24 Dual Technology Presence Detector utilizes PIR and ultrasonic technologies to detect the presence or signature of a person in a space. The logic options for initial “ON” and “Maintained” state of occupancy gives design engineers and installation contractors the choice for proper control of lighting and provides a 1-10 volt dimming output to control ballasts or driver lighting loads. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as presence is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness. After the Stay ‘ON’ time DIM before ‘OFF’ delay has expired, the light turns off. STEINEL’s world class PIR optics and ultrasonic signal processing provide unparalleled line of sight and volumetric presence detection. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for peer to peer grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience.

PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro COM1-WR is a line voltage passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. Features a single pyroelectric detector with a high performance lens system creating 1,760 switching zones. Operational choices of manual on or auto on with either momentary or maintained switch options. Included light level feature provides the option to turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box or Round 3.0 Mud-Ring. The available time saving wireless remote commissioning set up tool and the user /occupant wireless remote provides additional convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).

Dualtech PIR & 40 kHz Ultrasonic Presence Detector. Ceiling Mount. The DT Quattro DIM-24 Dual Technology Presence Detector utilizes PIR and ultrasonic technologies to detect the presence or signature of a person in a space. The logic options for initial “ON” and “Maintained” state of occupancy gives design engineers and installation contractors the choice for proper control of lighting and provides a 1-10 volt dimming output to control ballasts or driver lighting loads. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as presence is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness (1.6 volts), after the Stay ‘ON’ time DIM before ‘OFF’ delay has expired the light turns off. STEINEL’s world class PIR optics and ultrasonic signal processing provides unparalleled line of sight and volumetric presence detection. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for pier to pier grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience. The Control PRO group of presence detectors are available in multiple presence detection technologies for the control of heating, ventilation and air-conditioning (HVAC) and lighting loads (as in the COM2-24 versions) and optional 1-10 volt dimming and daylighting options (in the DIM-24 versions).

DMX Controller – USB, Euroblock, 1 dry contact port, 1 Zone, 128 Channel Input Power5.5 -12V via AC/DC Adapter 5.5v max via USBOutput ProtocolDMX512ProgrammabilityWindows, Mac OS XConnectionsUSB, Euroblock, 1 dry contact portDimension (in)3.38 x 3.38 x 0.39StandardsEC, EMC, ROHS CDMX128C

DMX Controller – 1 zone, 4 Channel Input Power12-24VDCOutput ProtocolDMX512ProgrammabilityN/ADimension (in)3.38 x 3.38 x 1.15StandardsEC, EMC, ROHS, ETL CDMX4C

DMX/RF – WiFi Controller CRF-WIFI

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel C94-3ZW

DMX Controller – USB, Ethernet and RS232 connection, 10 Zone, 1024 Channel Input Power6-7V DCOutput ProtocolDMX512 (x2)ProgrammabilityPC, Mac, Tablet, SmartphoneConnectionsUSB, Ethernet, RS232, Clock, 8 dry contact ports, 5v Output RelayDimension (in)4.17 x 5.75 x .39StandardsEC, EMC, ROHS, ETL C94-10ZDMX

The CASAMBI controllers will remotely control your lighting through the app - downloadable for IOS & Android.

Store up to 500 scenes across 10 separate zones with a full-color display.Details & Downloads

NEW & EXPANDED ACCESSORIESThe new TOUCHDIAL™zone control system controls single color dimming, tunable white, and color changing LED lighting via mobile device and additional TOUCHDIAL controls.Details & Downloads

Commercial-Grade 0-10V Dimmable LED Drivers are essential components commercial building applications and retrofits of low voltage LED fixtures in 0-10V control systems.Details & Downloads

This fully customized DMX color control for color-changing LED lights combines sophisticated control with ease of use.Details & Downloads

DMX wall-mounted color control systems provide professional-level control of color-changing RGB and RGBW LED lighting in one or multiple independent areas.Details & Downloads

Ideal for facilities that may not have access to the outside world via internet connection, the AirMesh Hub is a key component of the entire LED lighting system. It can switch lights off or on, or dim them to a specified level. Zones can be established so that lights in a particular area can be controlled separately from others. The system stores power data, behaviors, alarms and critical events locally for maintenance and troubleshooting.

RDM2go is a multi-functional tool for working with fixtures over a DMX/RDM data line. This palm-sized controller performs a multitude of tasks including RDM functionality, DMX snapshot and test-scene record and playback, DMX input and output monitoring. RDM2go features a built-in DMX cable integrity checker, and an easy to read OLED display. It also addresses Chauvet’s Iluminarc IP fixtures that do not have a display. The unit easily recharges via a standard micro USB jack and comes with a convenient carry pouch and DMX connector converters.

Logic POEX is designed to convert power and signal coming from Logic system controllers for MR16 fixtures. Deploy Ethernet cable runs up to 328 feet (100 meters) and deliver a maximum of 90W (75W useable) to fixtures driven and controlled by Logic system controllers. There is an additional Thru connector which is designed to link the control signal coming from the Logic system controllers to additional fixtures, but not power. Additional POE power injectors are required for fixtures that require POE power out of the Thru port.

Designed to inject POE power to remote fixtures using the latest POE standard IEEE 802.3 bt (Power over Ethernet). The Logic POE Injector has 1 output port and supports a maximum of 92.5 W. This unit can be mounted using the 2 teardrop brackets on either side of the housing. One power cable is included. A Logic controller using the Logic Remote Protocol (proprietary) is required to monitor the POE Injector.

The Logic Drive 2X is designed to feed power and control to remote fixtures using the POE latest standard IEEE 802.3 bt (power over Ethernet) and TCP/IP for control. It has 2 output ports and will support a maximum of 92.5 W/port. The Drive 2X includes one LOGIC Wall Con, which is a single gang wall controller that can recall up to 8 recorded scenes from the Drive 2X. Additional Wall Cons may be added to the system, up to 4 pcs on a single controller to have multiple control locations. The Drive 2X supports DMX, Art-Net, and sACN control protocols, and includes an integrated webserver to configure the date/time settings, which are used in the daily/calendar trigger.

Housed in an IP66-rated enclosure,IlumilinePower & Data Interface takes independent power and data lines and combines them onto our proprietary power and data single cable. For use withIlumiline SLandIlumiline MLfixtures. Power In: Hardwired input to bare wire DMX Data In: Hardwired input to bare wire Power Out/DMX Data Out: Proprietary IP66 output connector

Durable double-shielded Riglink production-gradeDMXlighting cable designed for stable signal transmission.

5-pin Female to 3-pin MaleDMXAdapter cable

Ovation B-565FCboasts groundbreaking features such as an RGBA-Lime color system and the incorporation of RDM, Art-Net™ and sACN plus standardDMXfor programming and networking options. This little powerhouse not only makes a great batten-style light, but is also a tremendous standard wash. A holographic filter is included and locks into place so the fixture can be used in any orientation with no worry about the filter sliding out.

REM MIRA is a high-performance indoor video wall solution with a thin profile that simplifies direct wall mounting and offers easy front installation and servicing of its universal magnetic LED modules. Premium NovaStar A10s Pro receiver cards, MX series processors and COEX VMP software work together to deliver a wide DCI-P3 color gamut and low-latency signal processing, resulting in a top-tier, camera-friendly system in a slim, wall-hugging design that comes with integrated frame linking hardware to save installation labor and time.

IP65-rated Riglink production-gradeDMXlighting cable designed for reliable signal transmission and robust connections in both installed and touring environments.

ConnectFX is the dedicated control app for the WELL CONNECT system, designed for easy operation and seamless WDMX, CRMX,DMX, ArtNet, and sACN control. Patch fixtures, change colors, set and playback scenes, and more, with this remote control solution for lighting professionals, system integrators, and event spaces. ConnectFX delivers dynamic and reliable control solutions when paired with WELL CONNECT. Available for iOS® and Android in both phone and tablet versions. Download Here:

UPLOAD 08 is a USB-connectable hardware device and PC application software designed specifically to upload software updates to both Maverick and Rogue moving heads.

PowerStream 4IP is an ingenious, IP65 rated splitter utilizing Seetronic PowerKon IP65 connectors. Placed in-line, it taps into up to four connections out to fixtures, allowing users to pre-rig a truss and limit the need for additional cables. Designed with production rental houses in-mind,PowerStream 4IP is compact, rugged, and comes with multiple rigging options for hanging in your rig.

Net-XII is a versatile rack-mountable Ethernet-to-DMXnode, which also functions as a merger for two controllers on either Ethernet orDMXinputs. It has the ability to record up to 10DMXpresets, which can be triggered remotely.Net-XII has two 5-pinDMXinputs and eight 5-pinDMXoutputs – all optically isolated, and can output up to eight universes simultaneously. The eight 5-pinDMXoutputs can be individually assigned to either of the twoDMXinputs (or the Ethernet inputs to mix network inputs withDMXinputs in a single device). LTP and HTP merging fully supports network protocols sACN, Art-Net orDMXto merge two incoming controllers to anyDMXoutput. It has RDM over network functionality.Net-XII provides a reliable platform for novice users with its preset configuration library, while providing experts with a highly customizable network infrastructure for complex control systems.

PowerStream 4is an ingenious splitter for powerCON®connections. Placed into the main power feed, it taps into up to five connections out to fixtures, allowing users to pre-rig a truss and limit the need for additional cables.

RDMXSplitter 8 is a versatile RDM and 5-pinDMXopto-splitter with a rugged, durable housing. It features 8 outputs and 2 inputs, so it can instantly go from a 1×8 splitter to a 2×4 splitter for two different universes. To simplify installation next to existing fixtures, PowerCON power linking is also supported to make it easier than ever to isolate, amplify and split a signal. For added versatility, the unit can be either rack or trust-mounted and supports electrical isolation between inputs and outputs up to 1000 V between ports.

NovaStar CVT10 Pro EO Converter is a rugged IP65-rated single-mode fiber converter that works with all NovaStar processors and supports 10x Gigabit Ethernet ports when used with the NovaStar MX40 Pro LED display controller. Full-duplex low-interference data transmission makes this converter suitable for bridging long-distance signal runs. Its outdoor-rated 19″ 2U design is suited to both truss and rack mounting, making it ideal for event production. Features include 10G optical modules, 1G Ethernet ports and a USB-B control port, along with durable Neutrik PowerCON and etherCON connectors and 2x M10 receivers for truss clamp attachment.

CHAUVET produces a variety of cables for all of its fixtures, includingDMXthree- and five-pin connector cables in varying lengths as well as extension cables. All CHAUVETDMXcables are made specifically for lighting and meet stringent standards of suitability and quality to provide safety, shielding and prevent transmission interferences.

Wireless Solutions Micro T-1 Transceiver works with W-DMXand CRMX enabled fixtures to generate a wireless control signal forDMXand RDM protocols. These compact devices can also be set up to transmit or receive W-DMXor CRMX signals to make any fixture or rig wireless. Backward compatible with G3, G4, G4S, and G5 series, and able to operate both W-DMXand CRMX enabled products in G4S Mode. Configurable via Bluetooth with the W-DMXConfigurator app. It also features a 5V USB power supply or can be used with (4) AAA batteries for up to 4 hours in transceiver mode and 8 hours in receiver mode. Indicator LEDs easily show signal strength, battery life, and transceiver or receiver mode.

WELL STX 360 is a large freestanding, battery-operated, and outdoor-ready LED tube that emits 360° of ultra-bright, high-quality, pixel-mappable light. Wireless control of 16 zones of the RGBWW LED’s produce exceptional eye-candy effects with high CRI – so it will look as great on camera as it does in person. In addition to being IP65 rated, WELL STX 360 can also be oriented in any position so you can fully utilize the wireless freedom this fixture is capable of. The unit is packaged as part of a complete kit that includes: 4 WELL STX 360, 4 eyebolts for suspended hanging options, 4 folding floor stands, 1 IR Remote, and 1 charging flight case. The device is also controllable via W-DMX, which can be used with almost any standard lighting controller, including the WELL COM with its built in W-DMXreceiver.

REM MIRA is a high-performance indoor video wall solution with a thin profile that simplifies direct wall mounting and offers easy front installation and servicing of its universal magnetic LED modules. Premium NovaStar A10s Pro receiver cards, MX series processors and COEX VMP software work together to deliver a wide DCI-P3 color gamut and low-latency signal processing, resulting in a top-tier, camera-friendly system in a slim, wall-hugging design that comes with integrated frame linking hardware to save installation labor and time.

RDM2gois a multi-functional tool for working with fixtures over aDMX/RDM data line. This palm-sized controller performs a multitude of tasks including RDM functionality,DMXsnapshot and test-scene record and playback,DMXinput and output monitoring. RDM2go features a built-inDMXcable integrity checker, and an easy to read OLED display. It also addresses Chauvet’s Iluminarc IP fixtures that do not have a display. The unit easily recharges via a standard micro USB jack and comes with a convenient carry pouch andDMXconnector converters.

3-pin Female to 5-pin MaleDMXAdapter cable

NovaStarMX20

NovaStar Fiber Converter CVT-10-S EO Converter offers a single-mode optical/electrical signal conversion solution for indoor use. Full-duplex low-interference data transmission makes this converter suitable for bridging long-distance signal runs. Its 19″ 1U design is both rack and desk mountable. Features include 10G optical modules, 1G Ethernet ports and a USB-B control port. Works with all NovaStar processors and supports 10x Gigabit Ethernet ports when used with the NovaStar MX40 Pro LED display controller.

NovaStar MX40 Pro is an all-in-one LED display controller that integrates video processing and control in a high-performance solution for the most demanding live and on-camera applications. Its powerful VMP display control software brings design, management and monitoring into one intuitive platform. Pair with REM video panels to achieve a fast, low latency system offering a wide color gamut, high bit depths, precise color adjustment, adaptable frame rates and realistic immersion ideal for virtual production and broadcast environments, as well as offering 12G SDI and Fiber long-distance transmission capabilities essential for the world of events and touring.

Ovation B-2805FCis the first batten-style fixture to take advantage of the extended color capabilities of the RGBA-Lime color mixing system. Control is easier than ever thanks to the incorporation of RDM, Art-Net™ and sACN in addition to standardDMXcontrol. For maximum flexibility, up to 10 sections can be controlled individually while its easily accessible Virtual Color Wheel and Color Temperature presets make programming abreeze. An included holographic filter locks into place for enhanced wall/cyc grazing ability.

A stunningly elegant wall station with a seamless, uninterrupted glass front plate, providing a beautiful interface if your project requires user interaction. The 5” touchscreen receives automatically generated pages via Express Control, based on programming in Express software. Easily control your lighting by activating scenes and adjusting intensity for each Space. With single cable installation, Express Touch 5 is a Power-over-Ethernet device. Included is a Universal Mounting Plate which is compatible with world-wide back boxes and boasts a secure and ingenious fitting mechanism.

Express Control offers robust DMX support that is easy to install and easy to use. Delivering up to 1,024 channels for dynamic architectural lighting applications, ideal for intelligent single-scene-per-space playback. Pharos Express Touchscreens (available in 5” and 8” models) provide elegant, wall-mounted user interfaces for intuitive lighting control, complementing the mobile app experience. A standalone solution that is not integrated with the WaveLinx Digital Lighting Control solution.

GeNetix Switch 8 is an eight-port unmanaged Gigabit PoE network switch that provides a total output of up to 200W of Power over Ethernet across its 8 ports. Ports 1-4 support IEEE 802.3bt up to 100W per port. In modes A & B, all ports support 802.3af and 802.3at standards. This rack mountable switch features a rear PowerCon True1 Mains input connector and is also truss mountable via its M12 threaded insert. GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

A range of wall mount network passthrough plates with: Available in versions to fit Single Gang US, EU or UK back boxes GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

ChamSys flight cases are carefully designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are premium cases that: Use high quality foam, cut using high precision C&C to ensure that the ChamSys products fit snuggly and moving parts such as buttons, faders, encoders and displays have maximum protection. Use high quality tough laminate giving superior resistance to knocks and bumps. Are designed with extra room underneath the products for storing accessories and cables – helping to prevent damage to the main product control surface. Use 6 rivet corners, 4 rivet braces for maximum strength. Use quality butterfly catches and case handles. Have custom cut outs in the foam for the working lights. Use ChamSys branding – colour and logo. ChamSys QuickQ flight cases are manufactured in the UK using C&C precision machining. Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products – particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences – our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

VS1+ delivers stunning 4K playback in a compact, lightweight, and robust package—perfect for touring professionals who need power, flexibility, and reliability on the road.

MagicQ Rack is a fully-featured rack mountable version of the MagicQ console designed for installations. It features the same operating system as MagicQ series consoles, but is designed to operate without physical user control, and supports all MagicQ features including scheduled events, OSC, UDP, and MIDI control. Featuring 10 buttons for activation of Playbacks and Executes, MagicQ Rack is easily paired with 10Scene wall plates to create a robust installed lighting control system with all the advanced capabilities of MagicQ such as pixel mapping and multi-element fixture control. Its 24 universes of DMX output are expandable to 48 via licence upgrade and connectivity features include two RDM-enabled DMX ports, inbuilt Wi-Fi for programming and remote control, and four 10Scene ports for connecting up to forty 10Scene wall plates. Ideal for installations and architectural applications, this 19″ 1U unit can be used as a desktop box or rack mounted with the supplied rack ears.

ChamSys flight cases are carefully designed to ensure maximum protection for ChamSys products, increasing the life and maintaining the value. ChamSys flight cases are premium cases that: Use high quality foam, cut using high precision C&C to ensure that the ChamSys products fit snuggly and moving parts such as buttons, faders, encoders and displays have maximum protection. Use high quality tough laminate giving superior resistance to knocks and bumps. Are designed with extra room underneath the products for storing accessories and cables – helping to prevent damage to the main product control surface. Use 6 rivet corners, 4 rivet braces for maximum strength. Use quality butterfly catches and case handles. Have custom cut outs in the foam for the working lights. Use ChamSys branding – colour and logo. ChamSys QuickQ flight cases are manufactured in the UK using C&C precision machining. Please note that flight case manufacturers may advertise lower cost flight cases for ChamSys products – particularly DJ cases made from cheap PVC, with low cost components, and using generic case sizes. Please be aware of the differences – our experience from repairing ChamSys products that have been in these types of cases suggest that they do not provide the same protection as ChamSys flight cases.

MagicQ Rack Mount Dongle is a USB Dongle that unlocks MagicQ PC systems from ‘demo mode’ allowing the restricted functions to be accessed. MagicQ PC Systems are also unlocked from ‘demo mode’ when connected to a MagicQ Wing or MagicQ USB Interface (not MagicDMX), The MagicQ Rack Mount dongle performs the same role in a small form factor – ideal for installations. The Rack Mount dongle can also be used to unlock all 8 layers of MagicHD stand alone, which is required only when MagicHD is not being controlled by a ChamSys console. The Rack Mount Dongle is the same price as the MagicQ Dual DMX Interface, but where the Dongle is small and fits in a rack mounted computer easily, the Dual DMX Interface does not. The Dual DMX Interface however provide two output ports, so customers may find that this a more cost effective solution in some cases. As well as unlocking MagicQ PC Systems from ‘demo mode’ having the rack mount dongle connected also allows the use of 3rd party and virtual MIDI interfaces to input Midi Notes into MagicQ. Full details of the MagicQ PC restricted functions and what the Rack Mount dongle unlocks are available here Note that triggering of Playbacks via USB MIDI is limited to the first 10 playbacks of MagicQ.

Built for the demands of rental houses, this system is strong, reliable, and effortless to operate. Featuring 2 x 4K outputs powered by MediaMaster Pro, it delivers exceptional performance with uncompromising dependability.