160 manufacturers · 18,987 products

The popular NanoLume can now be specified with Boca Lighting and Controls’s Dim to Warm technology, Nano Warm Dim.

Fixture comes in 6” increments (12” minimum)

The Boca Lighting and Controls NICHE-RT is a very small-profile low voltage fixture well suited to coves or task areas where space and energy consumption are constrained.

Boca Lighting and Controls’s HP-Submersible is designed for submersible installations where light output is a concern.

The Boca Lighting and Controls NICHE-HV is a very small-profile line voltage fixture well suited to coves or task areas where space and energy consumption are constrained.

The Boca Lighting and Controls HPCCS is a small-profile fixture well suited for many lighting projects where both space and locating transformers are concerns, but color changing is required.

The Boca Lighting and Controls MonoLink W10V provides a 0-10V Wireless solution.

Boca Lighting and Controls’s Nano HD is a line voltage fixture perfect for Cove Lighting, Wall grazing or Task Lighting in areas where space, output and energy consumption are a factor.

The ‘Slot In The Ceiling’ Series is an LED cast GRG (Glass fiber Reinforced Gypsum) downlight that integrates into the structure. Once installed, the fixture appears to be part of the ceiling and looks like a custom formed linear drywall light niche.

High performance, small aperture, LED wall wash fixture. T-Bar, plaster or drywall for recessed installations as well as Pendant and Cable mount options. Designed for minimal intrusion into the architectural space.

The IW LED Series provides a powerful, high angle, asymmetric wash of smooth even lighting. The totally indirect optical design shields the LEDs from any viewing angle. Ideal for lighting presenters in Video Conferencing applications.

The AK LED Series provides a powerful, high-performance asymmetric wash of smooth, even lighting. In addition to being an exceptional wall wash luminaire, it is shallow enough to recess into a standard stud wall to light the ceiling or floor. LED’s are totally indirect.

The DW LED Series of wall washer/grazer fixtures are designed for placement against or close to the wall (8-12″). When the application requires a wall wash fixture close to the wall, this fixture’s strong vertical throw of light smooths the brightness at the top of the wall to provide even, unscalloped illumination.

Mini, high performance LED cove fixture is made to lay directly into your narrow or prefabricated cove shelf, or be surface mounted to become the cove itself. The one piece reflector design illuminates the cove and minimizes shadows. By projecting light out of the cove and into the space for general illumination, they provide far superior performance than a typical “strip light” or LED tape.

Low profile, 6″ wide, high performance LED cove fixture is made to lay directly into your shallow cove shelf. The superior, one piece reflector design smoothly illuminates the cove and minimizes shadows between fixtures while projecting light out of the cove and into the space for general illumination.

Shallow profile LED cove fixture designed to be mounted directly to walls. Superior reflector optics minimize shadows and projects light into the space out-performing typical “strip light” and LED tapes.

The Cornice Light Cove is a complete cove lighting system providing both the cove itself and the lighting component. The cove is a gypsum based casting available in numerous profiles that are mounted end to end on the wall in 8′ increments that are field cut-able. The butted seams allow for tape and mud, leaving an uninterrupted, continuous cove. The lighting and reflector components drop in. The corners can be mitered on site or you can order precast inside and outside molded corners.

This 8 3/4″ wide, high performance LED cove fixture is made to lay directly into your large cove shelf. The superior, one piece reflector design smoothly illuminates the cove without unsightly shadows between fixtures while projecting light out of the cove and into the space for general illumination.

The HITW LED Series is a unique variety of LED cast GRG (Glass fiber Reinforced Gypsum) fixtures that provide an asymmetric throw of light and integrate into the structure. The GRG castings are available in many sizes from 4×6″ to 8×54″ for the aperture.

The Regrazer is a small cove grazer that grazes walls up to 40’ height with beam spread of 10° x 10°. Made from anodized aluminum it provides great heat dissipation.

The LE05 is a micro grazer with a regressed light source and therefore very low glare, great for the perimeter. Made from anodized aluminum it provides good heat dissipation.

The LD01 is aflangeless mud-overextrusion created from anodized aluminum that transforms perimeters into a beautiful glow which visually disconnects wall from ceiling. This extrusion’s innovative design allows for an invisible light source , making it a unique and outstanding architectural detail of immense esthetical beauty.

AB02 is the perfect extrusion for shelves, under cabinet, and more occasions where small and unobtrusive lighting solutions are required. The sleek design integrates discretely and still offers powerful illumination. The intelligent engineering allows for easy installation without any visible screws. Made from anodized aluminum it has great heat dissipation capabilities.

The JG04 is a 90° extrusion created from high quality anodized aluminum MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 1 3⁄16 x 1 3⁄16CustomizationCut to specified length JG04

The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 39⁄64 x 39⁄64CustomizationCut to specified length JD01

The JC01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 2 x 39⁄64CustomizationCut to specified length JC01

The JB01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only requires a slot for the extrusion and mudding in of the extrusion once it is glued or screwed into the slot. This extrusion can have diffusors up to 19’ 6” length as one piece/roll, creating a seamless look for longer runs. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x W 1 27⁄64 x 39⁄64CustomizationCut to specified length JB01

The JA01 is a flangeless pocket extrusion that combines a hidden light source with a smooth angle in the extrusion to exude an exquisite glow onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 39⁄64 x 2 13⁄64CustomizationCut to specified length JA01

The JF04 is a small 90° extrusion that was created from high quality anodized aluminum. MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 5⁄8 x 5⁄8CustomizationCut to specified length JF04

The LA01 is a recessed pocket extrusion that is crafted from high quality anodized aluminum, measuring just below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch studs or create special stud structures. The pocket extrusion allows for a hidden light source with a smooth angle in the extrusion to exude a beautiful radiant light onto floors, walkways, stairs and can also be used as an uplight (to replace a cove). MaterialExtruded AluminumColorAnodized SilverDimension (in)78 3⁄4 x 31⁄64 x 2 9⁄32CustomizationCut to specified length LA01

120V lighting system with five built-in CCT options. Every fixture can be freely switched to a color temperature of your choice.Details & Downloads

Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Two piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens for easy installation Compatible with wall-to-wall applications 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Two piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens for easy installation Compatible with wall-to-wall applications 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible

• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible

Customizable extruded faceplates Continuous lens option available – up to 200’ 4’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current

Features • 6063-T5 Aircraft Aluminum • Up/down cove styled channel • Connectable • Custom Lengths Available

Features • 6063-T5 Aircraft Aluminum • Cove styled channel • Connectable • Custom Lengths Available

Features • 6063-T5 Aircraft Aluminum • Cove styled channel • Custom Lengths Available

Features • 6063-T5 Aircraft Aluminum • Up/down cove styled channel • Custom Lengths Available

Iluminarc Logic Cove M is a sleek and discreet architectural batten designed for permanent installation into tight spaces, behind decorative elements, or anywhere an accent of illumination is needed. With its four color RGBW system, Cove can provide everything from a soft and pleasing incandescent glow to bold pops of bright, saturated color. Cove uses Power Over Ethernet (POE) to keep cabling efficient and clean, and supports daisy-chaining using widely available Ethernet cable.

Iluminarc LOGIC Cove is a sleek and discreet LED strip luminaire designed for installation into tight spaces. With its high quality 4-color RGBW color mixing system, Cove provides soft, pleasing accent light and indirect illumination of bright, saturated colors and white calibrated CCT presets. Cove utilizes Power Over Ethernet (POE) technology, receiving power and control via an advanced driver. Powerful control options include Calendar Scheduling via onboard webserver, DMX, RDM, Art-Net, Art-RDM, sACN, or you can use the included 8-button wall controller to trigger customizable looks.

With eight leaves of control, theOvation F6.25″ Barn Door helps control the output from wash fixtures. An all metal construction works for any fixture equipped with a 6.25″ accessory slot. Fixture sold separately.

With four leaves of control, theOvation F6.25″ barn door helps you control the output from your wash fixtures. All metal construction, our 6.25” barn door works in theOvation F-95WWLED fresnel as well as any other fixture with a 6.25″ accessories slot.

Maverick Force S Profile is ideal for small to medium multi-faceted projects in need of seamless color-mixing, advanced optics, framing shutters, and control options in a lightweight frame. Just over 50 lbs, this compact unit features a smart optical system that maximizes the output of 14,000 lumens and provides high-quality color mixing with a CTB filter. A 7-slot color wheel is also added with split-color combinations in mind. Maverick Force S Profile includes a custom framing system equipped with dual axis movement and a 120° complete module rotation for fast beam shaping. A speedy effects artillery includes motorized iris, frost, focus, a 5-facet prism and wide zoom ranging from 4.5° to 41.6°. Additionally, custom gobos created in collaboration with leading designers can be stacked on top of one another for dynamic effects. That is a lot packed in a small frame standing just over 2 ft tall. Control as you see fit withDMX, sACN, Art-Net or W-DMX.

Ovation F6.25″ Barn Door IP features an all-metal construction with stainless steel hardware, eight leaves for controlling light output, and fits any fixture equipped with a 6.25″ accessory slot.

With eight leaves of control and its all metal construction,Ovation F7.5″ Barn Door allows you to control output from any of your wash fixtures with a 7.5″ accessory slot. Fixture sold separately.

Ovation F7.5″ Barn Door IP features an all-metal construction with stainless steel hardware, eight leaves for controlling light output, and fits any fixture equipped with a 7.5″ accessory slot.

With eight leaves of control, theOvation F7.5″ barn door helps you control the output from your wash fixtures. All metal construction, our 7.5″ barn door works in theOvation F-165WWLED fresnel as well as any other fixture with a 7.5″ accessories slot.

Maverick Force S Spot is ideal for small to medium multi-faceted projects in need of seamless color-mixing, advanced optics, and control options in a lightweight frame, well under 50 lbs. The compact unit features a smart optical system that maximizes the output of 14,000 lumens and provides high-quality color-mixing with a CTB filter. A 7-slot color wheel is also added with split-color combinations in mind. Maverick Force S features a speedy effects engine that includes motorized iris, frost, focus, a 5-facet prism, and wide zoom ranging from 4° to 43°. Additionally, custom gobos created in collaboration with leading designers can be stacked on top of one another for dynamic effects. That is a lot packed in a small frame standing just over 2 ft tall. Control as you see fit withDMX, sACN, Art-Net or W-DMX. Wider zoom, narrower beams, same lightweight powerhouse Force formula: Meet the newMaverick Force X Spot

The BLADE Cove Light is equipped with an integrated driver designed for wall washing and grazing lighting applications, modular design.