160 manufacturers · 18,987 products

2R seriesrelays are designed to be the longest lasting, most reliable relays available. By incorporating a unique single moving contact, both endurance and reliability are significantly enhanced. These relays have been tested to handle 200,000 full load cycles and 1,000,000 no load cycles. They have two high quality nickel-silver contactsthat can handle today’s high-inrush loads. Relays are available with or without status contacts and are available with variousinterface connectors.

The ILC Remote 20 (R20) and Remote 20 Dimming (R20D) relays are designed to be mounted at the power junction box or lighting fixture for direct control of the lighting load. Relays are controlled from the EVO panel using a standard CAT-5 cable connection to the R20 relay RJ-45 jack. The R20 series relay uses oversized contacts designed to handle LED inrush current. Tested at 16 Amps electronic driver that can commonly exceed 200% of running current of the R20D latching relay load. The R20D has galvanically isolated 0-10V dimming which allows for class 1 wiring of the low voltage dimming. Loss of power to the LLEVO panel will force dimmer output level to 100%.

From the Versalux family, this canopy offers easy installation and maintenance features. Hinged door frame with thumbscrews for easy access. "Instaleze" ballast tray, wiring, and/or access features for ease of installation and maintenance. Heavy gauge formed aluminum body and door frame. Stainless steel hardware. Polyester powdercoat finish.

The HCD Pro Direct Mount System is the ultimate commercial downlighting solution for professional engineers and contractors. A completely modular system means fewer parts and pieces, making it easier than ever to specify and install exceptional downlighting in any application. Say goodbye to worrying about compatibility and upgrade to convenient flexibility with HCD Pro.

The HCSQ Square Downlight Series offers a comprehensive solution for the commercial professional. The sleek 4- and 6-inch square fixtures perfectly complement the popular HC Round Downlight Series. The HC/HCSQ Series share the same high-quality LED light engines to create consistency and reliable performance with simplified ordering and stocking. Our precision-formed medium distribution aluminum reflectors have been expertly designed to minimize glare, providing unparalleled visual comfort. The HC/HCSQ Series offers complete fixture flexibility, with options from 500 to 6000 lumens in five distinct color temperatures (80 or 90 CRI). Choose the HCSQ Square Downlight Series for a comprehensive lighting solution that is sure to elevate any commercial space.

The USSL Discrete area and site luminaire combines optical uniformity, energy efficiency and long-term reliability in an advanced, patent pending modern design. Now utilizing a direct-mounted discrete light engine, the USSL Discrete luminaire delivers unparalleled uniformity and improved visual comfort. A versatile quick mount standard arm facilitates ease of installation for both retrofit and new installations. The USSL Discrete fixture replaces 70-1,000W metal halide fixtures in general area lighting applications such as parking lots, walkways, roadways and building areas.

The USSL LED area, site, and roadway luminaire combines optical performance, energy efficiency and long-term reliability in an advanced, patent pending modern design. Utilizing the latest LED technology, the USSL luminaire delivers unparalleled uniformity resulting in greater pole spacing. A versatile mount standard arm facilitates ease of installation for both retrofit and new installations. With energy savings greater than 85%, the USSL fixture replaces 70 - 1,500W metal halide fixtures in general area lighting applications such as parking lots, walkways, roadways and building areas.

The Traditionaire LED outdoor luminaire displays the old-fashioned charm of traditional area lighting, enhancing any setting with distinctive styling. The high-lumen downlight configuration uses discreet LEDs with patented AccuLED Optics technology to deliver uniform and efficient illumination to pedestrian and roadway applications.

Consisting of two versions V2 and Flex. Flex has tilting ability from 0 to 30 degrees. Made of extruded aluminum, accommodating one or two modules with up to 48 LED protected by tempered screen-printed glass. Available with one or two lights, wall or pole mounted, and different height combinations

Continuous lens option available – up to 200’ Extruded aluminum single piece housing 4’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Efficacy up to 150 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current

Standard 4’ and 8’ units, or continuous rows Direct & Indirect light levels can be set to any combination at the factory Soft diffuse direct lighting from a unique indirect source and reflecting off a precision, cavity reflector Standard and premium custom powder coat options Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Architectural High Bay Extruded aluminum single piece housing Two standard lumen packages available Efficacy up to 153 lm/W Soft diffuse lighting with acrylic lens standard Textured powder coat finishes available in black and white Custom powder coat colors available upon request 0-10v dimming is standard Dim to 1% of output current is standard Natatorium rating available 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible

Continuous lens option available – up to 200’ Extruded aluminum single piece housing 4’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Efficacy up to 150 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current

Continuous lensing standard– runs up to 200’ Extruded aluminum single piece housing Standard 4’and 8’ units, or continuous rows Linear runs with proprietary joiner design Light levels can be set at the factory Efficacy up to 125 lm/W Soft diffuse direct lighting Textured powder coat or clear anodize finish Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Two piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens for easy installation Compatible with wall-to-wall applications 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Extruded aluminum single piece housing Standard 4’ and 8’ units Light levels can be set at the factory Efficacy up to 140 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black, and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50 min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Continuous lensing standard– runs up to 200’ Extruded aluminum single piece housing Standard 2’, 4’, 6’ and 8’ units, or continuous rows Linear runs with proprietary joiner design Light levels can be set at the factory Efficacy up to 140 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black, and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50 min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

• Seamless glare eliminating shade • UGR < 19 • Standard 2’, 4’, 6’ and 8’units or continuous rows • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible • Consult factory for TM21, TM30, LM79 and LM80

Continuous lensing standard– runs up to 200’ Extruded aluminum single piece housing Standard 2’, 4’, 6’ and 8’ units, or continuous rows Linear runs with proprietary joiner design Light levels can be set at the factory Efficacy up to 140 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black, and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50 min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Continuous lensing standard– runs up to 200’ Extruded aluminum single piece housing Standard 2’, 4’, 6’ and 8’ units, or continuous rows Linear runs with proprietary joiner design Light levels can be set at the factory Efficacy up to 140 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black, and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50 min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80

Extruded aluminum single piece housing 4’ and 8’ individual units, or continuous rows Linear runs available up to 100’ (High Output) with proprietary lens joiner for seamless optics Straight runs with proprietary joiner design Three standard lumen packages available Efficacy up to 145 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Custom colors available upon request* Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current

• Continuous lensing – runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • Compatible with wall-to-wall applications • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible • Consult factory for TM21, TM30, LM79 and LM80 • IC Rated • Chicago Plenum available • L70 > 50,000 hours

Available in 4’ and 8’ individual fixtures Two standard lumen packages Efficacy up to 155 lm/W Soft diffuse direct lighting Clear anodize finish Custom powder coat colors available upon request Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard CA Title 24 / JA8 installation compatible

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation Compatible with wall-to-wall applications 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 IC Rated Chicago Plenum available L70 > 50,000 hours

Soft diffused direct illumination in a sleek modern minimalist style. Thermally efficient extruded aluminum single piece housing 4’ and 8’ individual units, or custom lengths Toolless height adjustment at the ceiling Textured powder coat finishes available in white, black, and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard Three choices of remote drivers, surface mount, in-wall or powered ceiling canopy.

Seamless glare eliminating shade UGR < 19 Extruded aluminum single piece housing 2’, 4’, 6’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Efficacy up to 130 lm/W Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible (Consult factory for TM21, TM30, LM79 and LM80.)

Single piece aluminum extrusion housing Individual 2’, 4’, 6’ and 8’ units, or continuous rows Linear runs with proprietary joiner design Efficacy up to 140 lm/W Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50 min) available CA Title 24 / JA8 installation compatible

Proprietary linking design for straight rows Continuous row configurations available up to 171’ at 277V and 103’ at 120V Plug-and-play installation Two standard lumen packages Efficacy up to 155 lm/W Soft diffuse direct lighting Clear anodize finish Custom powder coat colors available upon request Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard CA Title 24 / JA8 installation compatible

• Available in 4’ and 8’ individual fixtures • Three standard lumen packages • Efficacy up to 145 lm/W • Soft diffuse direct lighting • Finishes available in clear or black anodize • Custom powder coat colors available upon request* • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • CA Title 24 / JA8 installation compatible

• Proprietary linking design for straight rows • Continuous row configurations available up to 410’ at 277V, and 177’ at 120V • Plug-and-play installation • Three standard lumen packages • Efficacy up to 145 lm/W • Soft diffuse direct lighting • Finishes available in clear or black anodize • Custom powder coat colors available upon request • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • CA Title 24 / JA8 installation compatible

• Tight optical control from beam shaping optics • Regressed light source to minimize glare • Extruded aluminum single piece housing • 2’, 4’, 6’ and 8’ individual units, or continuous rows • Straight runs with proprietary joiner design • Direct and Indirect light levels can be set to any combination at the factory • Efficacy up to 142 lm/W • Textured powder coat finishes available in white, black and silver • Driver removable from top side of fixture • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible

• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 130 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • CA Title 24 / JA8 installation compatible • IC Rated • Chicago Plenum available