160 manufacturers · 18,987 products

6" PAR30 double gimbal and self-flange ring with a 35-50-degree maxium tilt

Metal Baffle trim for 120V line voltage 4" H99 family recessed housings. Baffles and die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

Albalite Lens trim in the 6" trim family for use in recessed downlighting.

The HALO Flush Mount Series is an energy-efficient puff LED flush mount with a field-selectable CCT switch that enables customization from warm to daylight to suit any decor. The FM has flicker-free dimming down to 10%, round low-profile lens, and LEDs rated for 50,000 hours. The FM LED energy savings are up to 80% over traditional incandescent or fluorescent options. Typical surface mount applications include bedrooms, closets, corridors, stairways, and utility rooms.

Frosted Dome Lens Shower LIght trim in the 4" trim family for use in recessed downlighting.

Set of 4 coil springs for use with 301, 310, 401 and 426 trims in the H7 recessed housing family.

Coilex® Baffle trim in the 6" trim family for use in recessed downlighting.

H1999 Socket Extender is for use with selected trims and housings to extend the lamp 1” (25mm).

Downlight shower trim designed for use with IC or Non-IC AIR-TITE™ 3" Halo small aperture line and low voltage housings. Flat frosted perimeter glass provides even illumination. This wet location listed shower trim uses MR16 low voltage or GU10 line voltage lamps. Shower trim offers 360° orientation within housing.

Say goodbye to mounting restrictions and mismatched lighting. The CJB Integrated JBox Downlight installs just about anywhere in the ceiling and has simplified installation with no need to attach the junction box to wood framing because it is already attached to the fixture. This slim LED downlight features two mounting options: fast installation directly into the ceiling with no housing needed or as an LED trim into an existing housing in retrofit situations. It’s the downlight that gives you the freedom to add a fixture where you want, while maintaining an attractive, consistent look.

Recessed 3" aperture shallow new construction housing for use with LED integrated trims. Suitable for 2x6 residential framing or shallow plenum commercial construction, type IC rated and can be used in direct contact with insulation. Airtight rating reduces airflow between living spaces and unconditioned areas providing additional energy savings. Use with compatible HALO® LED integrated trims and modules providing general, task and accent lighting when energy savings, long life and optical control are required.

The Halo LA4 LED Adjustable Downlight series are adjustable LED modules for 4” aperture recessed downlights. The LA4 gimbals feature adjustment of 35-degree tilt and up to 360-degree rotation. The lens provides uniform illumination and wet location listing.. Precision construction makes any housing AIR-TITE for added savings and code compliance.

Slope Ceiling Baffle trim in the 6" trim family for use in slope ceiling recessed downlighting.

4" White eyeball, 30° tilt with self-flange trim ring.

AIR-TITE Baffle trim in the 6" trim family for use in recessed downlighting.

591WB is a 5-inch aperture shallow baffle with non-electrically conductive “dead front” construction. The baffle and self-flange are polymer. 591WB shallow "dead front" baffle is offered in White baffle with White flange. The shallow trim height provides capability for installation into both shallow and standard 5-inch aperture recessed housings with ML56 LED Light Modules. 591WB LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Adjustable Eyeball trim for 120V line voltage 4" H99 family recessed housings. Eyeball has 30° tilt and can be rotated 360°. Eyeball and die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing. Integral trim socket with screw in plug to housing socket.

Slope Ceiling Reflector trim in the 6" trim family for use in slope ceiling recessed downlighting.

The HALO HLBC is a slim LED downlight designed with visual comfort in mind. It features a regressed prismatic lens for superior glare reduction, while maintaining an ultra-thin 1/2" fixture thickness above the ceiling plane. This means the HALO HLBC can be installed virtually anywhere, regardless of plenum space. The HLBC is perfect for new construction, remodel, or retrofit jobs. The 2-in-1 installation system allows the installer to easily switch from canless installation to retrofit installation. During installation select the perfect color temperature for your space with 5 color temperatures between warm (2700K) to daylight (5000K) or Dim-to-warm option. The dim-to-warm setting begins at 3000K and dims smoothly to 1800K, creating a rich, warm glow resembling candlelight or the sun on the horizon. The HALO HLBC is an ideal solution for residential and light commercial applications where visual comfort and installation flexibility are a priority.

6" White PAR/BR30 eyeball and self-flange ring with a 35-degree maxium tilt

Pinhole trim for 120V line voltage 4" H99 family recessed housings. Die cast trim ring is available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

Halo Roundback Cylinder lampholders utilize a variety of lamps. Lampholders are yoke mounted and are available in satin white and matte black finishes. Models come in both low and line voltage and also offer optional barn doors, color filters, optical lenses and baffles. Halo Roundback lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering and precise beam control are required.

6" Shallow full cone baffle with self-flange ring

6" Full cone reflector with self-flange ring

OT999P Oversized white metal trim ring. Compatible with 990, 992, 993, 994, 996, 998, 999, 1419, 1420, 1421, 1493 and 1498. Dimensions: 4” ID x 5 3/4” OD

The HALO LCR Series comes in sizes 2", 4", 6" and 8" wall wash and downlights. This high-powered LED module installs without the use of a recessed housing, reducing time and expense on remodel or new construction. The downlight has a wide distribution pattern ideal for general area illumination and the wall wash illuminates a vertical surface with uniform brightness. The LCR series comes with dual dimming as standard and is designed for residential, mixed-use, and commercial spaces. The LCR has ultimate flexibility with selectable color temperature and lumens. During installation select the perfect color temperature for your space with 6 color temperatures between warm (2700K) to daylight (6500K). Depending on your ceiling height or desired light level choose from several lumen options. The LCR Series features an emergency battery option and designer trims in smooth or baffle.

Baffle trim for 120V line voltage 4" H99 family recessed housings. Die cast trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

HALO LED Span fixture family is designed for use as a downlight or wall wash light. The SPAN LED is ideal for applications where a wide even distribution of light is desired. The luminaire can be used to wash a wall with light or as a downlight to evenly illuminate a counter. Utilizing LED technology, it is extremely energy efficient.

The HALO Night Light Canless Downlight comes in sizes 4" and 6" and features two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. This canless direct mount downlight does not require a housing for installation. The slim design fits in 2x4 construction or ultra-shallow plenum spaces. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light.

6" Straight metal baffle with two rings narrow and wide.

The Halo RL4 Deep Baffle is a complete LED Bafle-Trim Module for 4-Inch aperture recessed downlights' suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 degree optical cutoff. The Deep Baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.

5" Regressed adjustable baffle, self-flange ring with a 30-degree maxium tilt

Shallow Baffle trim for H25 incandescent housing. Dual position socket support for BR or PAR lamps.

Dome Lens with Reflector trim in the 6" trim family for use in recessed downlighting.

596WB is a 5-inch aperture shallow baffle offered in Matte White with Matte White flange. The shallow trim height provides capability for installation into both shallow and standard 5-inch aperture recessed housings with ML56 LED Light Modules. 596WB LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Metal Baffle trim for use with the H5 series housings. Trim includes dual position socket supports for BR and PAR lamps.

The Bachetta series of lampholders offers the beauty and functional design that sophisticated spaces require. The Bachetta family includes lampholders that support 12V MR16 and PAR30/38 lamps. The light weight and small size of this lampholder family makes them ideal for use in museums, galleries, malls, exhibits and similar areas where high interior light is needed. Trim options include color filters, optical lenses and baffle.

Ideal for accent, task and general area lighting, the 3" aperture LED downlight features field interchangeable optics that provide various distribution patterns for specific application needs. Housing is airtight for direct contact with insulation. Trims are available in a range of finishes and can be installed rimless with an optional rimless adapter. Use where high efficiency, excellent light control and low aperture brightness are required.

Ideal for accent, task and general area lighting, the 3" aperture LED downlight features field interchangeable optics that provide various distribution patterns for specific application needs. Housing is airtight for direct contact with insulation. Trims are available in a range of finishes and can be installed rimless with an optional rimless adapter. Use where high efficiency, excellent light control and low aperture brightness are required.

Open trim with sock support in the 6" trim family for use in recessed downlighting.

5" Specular clear tapered reflector, white self-flange ring

The H38LVICAT is an IC AIR-TITE™ fixture for use with H3 3” series trims. Housing is AIR-TITE™ rated to prevent airflow between heated or air conditioned spaces and unconditioned attic/plenum areas. For use with 12V MR16 lamps. H38LVICAT is IC rated and may be used in insulated ceilings and be covered with insulation.

Reflector trim for 120V line voltage 4" H99 family recessed housings. Die cast trim ring with metal reflector. reflector and trim ring available in a variety of finishes. Three “cat’s paw” springs secure trim in housing.

4" White trim ring, cut-cone reflector with prismatic glass lens.

594 Series of 5-inch aperture eyeball with baffle and self-flange. The precision spun aluminum eyeball with baffle element delivers on functionality of a directional accent. The directional eyeball can be tilted from 0 to 30 degrees, and the rotational mechanism allows for rotation adjustment up to 360 degrees. The 594 series eyeballs may be used in most standard and shallow height 5-inch aperture recessed housings with ML56 LED Light Modules. 594 Series LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

The HALO HLB Smooth-Lens Slim Canless Series provides consistent illumination while mounting virtually anywhere thanks to their sleek, ultra-slim design. Dedicated and selectable color temperatures along with top-tier quality testing, and energy efficient LEDs make these wafer-thin HLBs an excellent downlighting choice for new construction or remodeling.

Metal baffle trim for use with the H5 series housings. Dual position socket support for R or PAR lamps.

HALO Smart Wi-Fi lighting delivers unexpectedly easy setup and control via the WiZ app. Fixtures connect to existing Wi-Fi for smart control at home, away, or with your favorite smart speaker. Enliven any room with millions of colors or tunable whites with lighting scenes from candlelight to party mode.

The HALO RL3 is a complete LED module for 3-inch aperture recessed downlights, suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can choose between five different color temperatures. The flat lens and smooth baffle provide uniform illumination and wet location listing. Precision construction makes any housing airtight for added savings and code compliance.

Accessory / spare trim gasket for use with H7 and EI/ET 700 family trims.

AIR-TITE Reflector trim in the 6" trim family for use in recessed downlighting.

Upgrade your lighting game with RLS Slope Canless LED Downlights - the perfect solution for your sloped ceiling needs. Designed for both remodeling and new construction projects, these fixtures require no housing and feature an adjustment mechanism that allows you to aim light straight down, regardless of the ceiling pitch. With bright, high-quality LEDs and an integrated optic, these downlights provide optimal lighting in even the tallest of sloped ceilings. Don't wait any longer - invest in the best and enjoy reliable and bright lighting today!

HALO's Night Light Recessed LED Trims come in 4" and 5/6" aperture sizes and feature two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light. Use with 4", 5", or 6" new construction and remodel housings.

4" White Trim ring with specular reflector.

696WB is a 6-Inch aperture shallow baffle offered in Matte White with Matte White flange. The shallow trim height provides capability for installation into both shallow and standard 6-Inch aperture recessed housings with ML56 LED Light Modules. 696WB LED Trim is an integral element in the Halo ML56 LED Downlighting System. ML56 LED System is a series of modular LED Light Modules for use with dedicated 5” or 6” ML56 LED trims. The ML56 LED trims in 5" and 6” aperture sizes are designed to fit Halo, All-Pro and others 5” or 6” recessed housings.

Eyeball trim with 30° tilt in the 6" trim family for use in recessed downlighting.

6" Straight-side metal baffle with self-flange ring.

6" Full cone baffle with self-flange ring

Halo Step Cylinder lampholders are designed for R, PAR, A and BR lamps. Lampholders are available in satin white and black and polished brass finishes. These lampholders are compatible with all Halo Power-Trac systems. Ideal for accent and display lighting applications where high coloring rendering is required. Lampholders include baffles and are available in a variety of finishes. Lazer lampholders are compatible with all Halo Power-Trac systems.

5" White PAR30 eyeball, self-flange ring with a 35-degree maxium tilt.