Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
4,145 products
BrandAll▾
SortRelevance▾
The WaveLinx LITE Contact Closure Input is a WaveLinx LITE device that provides the ability to take inputs from other devices, like fire alarm panels, keyed switches, or other devices, incorporating momentary or maintain actions to allow the system to respond to demand response, alert mode, after hours occupancy or a sensor input.
The PRO Wallstation (W-Series) is a multi-scene, single area dimming wallstation which provides customized light level for each area. The wallstation provides default sequence of operations including 50% light level, scene light levels between 30-70% as well as 100% and full off. Many wallstation configurations also include scene raise/lower buttons to further adjust the light levels.
The WaveLinx PRO Universal Voltage Dimming Switchpack (RSP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The RSP-P consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. This powerpack is an integral part of the WaveLinx system. It communicates with other PRO devices and WaveLinx Area Controller using PRO protocol, a 2.4GHz wireless mesh network based on IEEE 802.15.4 standard.
The WaveLinx Wired Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.
The WaveLinx Wired Universal Source Controller, Feed Through (SC-UN-FT) lighting control panel provides feed-through wiring flexibility for both new and existing applications. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, and real-time individual dimmer power metering. Constant live feed per dimmer, for battery powered emergency lighting.
The WaveLinx Wired Sensor Powerpack (FLT-SP) provides power to low voltage sensors and communicates occupancy data status to the WaveLinx Wired system. This Sensor Powerpack is ideal for open spaces that require two or more dual technology sensors.
The WaveLinx DALI Field Relay (FRS-DA) provides On/Off control and network connectivity in order to conserve energy and effectively manage the lighting system. The Field Relay uses advanced switching technology specifically designed to handle the large inrush currents and inductive loads found in lighting applications.
The WaveLinx LITE Switchpack (RSP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights as well as receptacles. The powerpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. The Switchpack integrates into the LITE system by forming a mesh networking while communicating with other LITE devices using Bluetooth protocol.
The remote PRO Outdoor Sensor Extender / Multiplier (RSWPD) housing incorporates a WaveLinx SWPD4 and SWPD5 wireless sensor, and is available in two distinct configurations: In the first configuration (RSWPD-WE), the device acts as a Wireless Extender. It is placed in a location where no WaveLinx enabled luminaire is present, thus providing a way for the wireless system to find a node from which to hop. This is an ideal configuration for when the WaveLinx WAC is too far from the first luminaire. In the second configuration (RSWPD-CM), the device acts as a Control Multiplier to distribute the commands from the WaveLinx system solution to multiple sensorless luminaires at once.
• Bi color Red/Green LED’s • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 1.2V 900mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed • The battery operated emergency exit lights are the perfect solution for applications that require both an exit sign and an emergency light.
• 5 Years limited warranty • 1.8 inch Wide • Wattage switchable 4′ 20W/40W/60W/ 8′ 40W/60W/80W • 100lm/W efficacy • 3CCT adjustable 3000K/3500K/4000K • Length option: 4ft 8ft • 100% downlight • White or black finish available • Driver with 120-277V • Seamless continuous runs 120V run up to 40 FT and 277V run up to 100FT • Multiple mounting option surface mount/pendant mounts
• The Wet location Fire Led Emergency Light provides lighting in harsh climates • Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Suitable for wall mount applications • Universal J-box mounting pattern • 120V/277VAC dual voltage operation • 2*12pcs ultra bright 2835 0.5W LED lamp heads for emergency mode, provide more than 400LM output • Built-in 3.6V 2000mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • Dual head emergency lighting, equipped with easy connect back plate and 180 degree rotating heads, makes it a snap to put this dual voltage unit anywhere
• Aluminum housing with high grade acrylic panel • Plastic mounting plate allows top, back or end mount • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 4.8 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed
Limited Warranty: 10 yearsWattage: 100W/150W/200W/240W/300W/350WColor Temperature: Standard 4000K & 5000K • Premium 5050 SMD LEDsDistribution Type: Type III/IV/V distributions • Mounting: Wall mount/Arm mount / Trunnion mount/ Slipfitter/Multi Direction MountEfficacy: Up to 136 LPWLumen output: 14,200lm -51,000lm • 1-10V Dimming
Limited Warranty: 10 yearsWattage: 45W/62WColor Temperature: Standard 4000K & 5000KEfficacy: Up to 120 LPWLumen output: 5580lm – 7688lm • 120-277V / 347-480V • 1-10V Dimmable • Optional accessories: Internal photocell and emergency battery • Standard DLC 5.1
• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Innovative, easy installation in minutes • Suitable for wall mount applications • Universal J-box mounting pattern • 120-277V Universal Voltage Operation • 2pcs 1W ultra bright LED lamp heads for emergency mode • Up to 200 lumen output • Built in 3.6V 1000 mAh Ni-MH battery for minimum 90 minutes emergency operation
• Injection-molded thermoplastic ABS housing, UL 94V-0 flame rating • Wet location use • Innovative, easy installation in minutes • Letters 6″ height with 3/4″ stroke • Single or double face • Universal J*box mounting pattern • 120V/277VAC dual voltage operation • Built -in 3.6 V 500mAh Nickel cadmium battery for minimum 90 minutes emergency operation • Maximum 24 hours for full recharge time • Test switch and charge indicator • 0℃ to 40℃ indoor damp location listed
• 120-277 VAC, 50/60Hz • 360 degree, maximum coverage 60′ diameter from 40′ height • 0-10V • Operating temperature: -40 – 158 °F • IP66 for PIR Lens
The LGA-1 Surface Mount fixture features our innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management while exceeding the Well Building standard for glare reduction. With an impressive light output of up to 159 lm/W, this fixture offers specified lumen outputs (SLO) ranging from 131 to 1179 lumens per foot. Its minimalistic 1.5” aperture and low-profile design enhance its aesthetic appeal, while the toolless latch system and Quick-Click 5-Wire setup ensure simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
Laguna 1 Suspended delivers refined architectural lighting with advanced optical performance, featuring a minimalist 1.5" aperture and low-profile form. The Point Source Louver (PSL) optics provide a deeper louver and “extra quiet” visual experience. Engineered to meet or exceed WELL Building standards for glare control, it combines aesthetics with comfort. The fixture offers a readily accessible integral driver and a unique slider optic removal system for effortless installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White come standard. Proudly crafted in Huntington Beach, CA and BABA compliant in most configurations.
The LGADU-1P Direct/Indirect Suspended fixture features innovative Point Source Louver (PSL) design that utilizes high-efficiency 90+ CRI chips for precise light management, exceeding the Well Building standard for glare reduction. With a Brilliant by Design™ philosophy, this fixture combines a minimalistic aesthetic with advanced louvered optic solution. It delivers exceptional light output of up to 159 lm/W, with specified lumen outputs (SLO) ranging from 131-1179 lumens per foot. The minimalistic 1.5” aperture and low-profile design enhance its sleek appearance, while the innovative slider optic removal system ensures easy installation and serviceability. The fixture is available in individual lengths and seamless continuous runs, and it incorporates a toolless latch system and Quick-Click 5-Wire setup for simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.
The HTG-1PR-LP LoPro Flush Perimeter fixture offers versatile mounting options with Trimless, Trim Flange, and T-Grid flush configurations. Engineered for low-profile installations, it fits within a slim 2.85"–3.05" depth behind the ceiling, ideal for low-plenum spaces. Designed with uncompromised performance, it provides exceptional glare control with options for diffused (Lambertian) or room-fill optics. With a minimalistic 1.5” aperture and specified lumen outputs (SLO) from 224 lm/ft to 1754 lm/ft, the fixture is available in individual lengths or continuous runs up to 300 feet with no lens breaks. Accessibility is simplified with a patented, toolless “Push to Eject” system, along with a Toolless Latch System and Quick-Click 5-Wire setup for fast, seamless installation. Each fixture is proudly crafted in Huntington Beach, CA, USA.
The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
The HTG-3PR Regress Perimeter fixture features versatile mounting options, including Trimless, Trim Flange, and T-Grid regressed configurations, making it suitable for a variety of applications. It accommodates multi-depth ceiling options for most plenum installations, with a 1.75” regress requiring a depth of 5.75”–6.13” (integral driver) and a 3” regress needing 7”–7.38” (remote driver). Designed for optimal performance optics. The fixture boasts a minimalistic 3” aperture and specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft. Available in individual lengths or seamless continuous runs up to 300 feet with no lens breaks, the HTG-3PR ensures easy accessibility for drivers, wiring, and serviceability from below the ceiling, thanks to its patented toolless “Push to Eject” system. Additionally, the toolless latch system and Quick-Click 5-Wire setup facilitate simple and quick installation. Proudly crafted in Huntington Beach, CA, USA.
The HTG-1P Suspended fixture combines sleek architectural design with high-performance lighting, made possible by innovative Microstructure EdgeTech Optics™. Offering seamless illumination and uniformity, it supports a range of optical distributions including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, and Ceiling Wash. With a minimal 1.5" aperture and ultra-low profile, the HTG-1P delivers clean lines and uninterrupted rows up to 250 feet—free of lens breaks, pixelation, or hot spots. Installation is fast and tool-free with the patented “Push to Eject” system. Direct or Indirect orientations are available, along with versatile mounting options: standard aircraft cable or 361° locking rotational aircraft cable. Choose between integral or remote driver configurations, all with concealed hardware for a polished finish. Available with Specified Lumen Outputs (SLO) up to 1480 lm/ft and standard 90+ CRI with optional Tunable White. Custom powder coat finishes are also offered to suit any design vision.
The HTG-3P is a 3-inch suspended linear fixture with Microstructure EdgeTech Optics™ for precise control and seamless, uniform illumination. It supports Batwing, Glare Control, Diffused, Wall Wash, and Ceiling Wash optics, with a low-profile depth of 1.38 to 3.4 inches. Designed to match the HTGDU-3P for architectural consistency, it offers continuous runs up to 250 feet, toolless “Push to Eject” access, and aircraft cable or 361° locking mounting. Available with multiple driver options, custom finishes, and SLO up to 1754 lm/ft. Proudly made in Huntington Beach, CA and BABA compliant.
The HTG-3R-LP delivers high-output performance and architectural elegance in a low-profile design, ideal for any plenum-restricted installation. With depths ranging from 1.5"–1.75" (remote driver) or 2.14"–2.45" (integral driver), it features a sleek 3" aperture and supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics. Offering Specified Lumen Outputs (SLO) from 224 to 1754 lm/ft, the fixture supports seamless runs up to 250 feet with no lens breaks and up to 16’ on-center spacing at 35fc. All components—including drivers and wiring—are accessible from below the ceiling via the patented toolless “Push to Eject” system. Fast, clean installation is ensured with the Toolless Latch and Quick-Click 5 Wire system. Compatible with multiple ceiling types, including Trim and Spackle Flange, Grid Lay-in and Tegular (15/16” or 9/16”), Bolt Slot, Armstrong Interlude/USG Identitee, and 4” TechZone™ for seamless integration. Proudly crafted in Huntington Beach, CA – USA
Engineered for plenum-constrained spaces, the HTG-1R-LP Recessed LoPro delivers high-performance illumination with an ultra-slim profile—just 1.5" to 1.75" deep with remote driver, and 2.14" to 2.45" with integral driver. Featuring a minimalistic 1.5" aperture, it supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics for tailored performance without design compromise. Achieve seamless continuous runs up to 250 feet, with uniform light and no lens breaks. Delivering up to 1480 lm/ft with 90+ CRI and optional Tunable White, the fixture enables up to 16' on-center spacing at 35fc. Installation and maintenance are simplified with the patented toolless “Push to Eject” system, Toolless Latch System, and Quick-Click 5 Wire connection. Compatible with a wide range of ceiling types including Trim Flange, Spackle Flange, 15/16” or 9/16” Grid Lay-in and Tegular, Bolt Slot, or Armstrong Interlude/USG. BABA/BABAA compliant in most configurations – contact factory for details.
The HTGDU-1W Arm Mount delivers precision illumination through advanced Microstructure EdgeTech Optics™ and individually controlled direct and indirect MEO™ optics. Its minimalist 1.5" aperture and ultra-low profile support PRO optic options—including Ceiling Wash, Wall Wash, and Diffused (Lambertian)—with Narrow Distribution available for wall wash applications. Engineered for versatility, it features 361° locking rotational arm hubs with beautifully machined end caps and matching hardware, plus an innovative, toolless “Push to Eject” system for effortless installation and service. Custom powder coat finishes and Specified Lumen Outputs (SLO) up to 1480 lm/ft. are available, with 90+ CRI standard and Tunable White optional. Proudly crafted in Huntington Beach, CA, and BABA compliant in most configurations.
The HTG-3P-PDS delivers high-performance lighting with clean aesthetics, featuring Microstructure EdgeTech Optics™ for precise control, seamless illumination, and uniform output. This 3" aperture fixture utilizes a minimalist 1/8" suspension cord, available in silver or white with chrome-plated connectors—carrying both positive and negative wires for streamlined installation. Suspension lengths extend up to 10 feet from canopy to fixture. Designed for both direct and indirect configurations, the ultra-low-profile form supports individual lengths and continuous runs up to 250 feet with no lens breaks or visual hotspots. Choose from a wide range of optics including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, or Ceiling Wash. Additional features include a toolless “Push to Eject” system, custom powder coat finishes, SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White. Proudly manufactured in Huntington Beach, CA and BABA compliant in most configurations.
The HTG-1 Surface combines sleek design with advanced performance, featuring Microstructure EdgeTech Optics™ for precise light control, seamless illumination, and superior uniformity. With a minimalist 1.5" aperture and ultra-low profile, it offers flexible optic options including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Available in individual lengths or seamless runs up to 250 feet with no lens breaks or hotspots. Installation is quick and easy with the innovative toolless “Push to Eject” system, and the design features no visible fasteners for a clean aesthetic. Choose from integral or remote drivers, custom powder coat finishes, and SLO outputs up to 1480 lm/ft with 90+ CRI standard. Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
Designed for direct T-Grid mounting, the HTG-3 Surface T-Grid delivers seamless integration and high-performance illumination with a minimal 3" aperture and ultra-slim 1.38" depth. Featuring Microstructure EdgeTech Optics™ (MEO™), it offers optic options including Batwing, Glare Control, Diffused (Lambertian), and Wall Wash. Achieve clean, continuous runs up to 250 feet with no lens breaks or hotspots, and design flexibility with mitered lit corners. The innovative toolless “Push to Eject” system and flush T-Grid mounting make installation fast and clean. Supports 16' on-center spacing with Batwing optics and offers SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White options. Available in custom powder coat finishes. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
Engineered for direct T-Grid mounting, the HTG-1 Surface T-Grid delivers sleek, integrated performance with a minimalist 1.5" aperture and ultra-low profile. Powered by Microstructure EdgeTech Optics™ (MEO™), it offers a variety of precision optics including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Designed for visual comfort and performance, it supports outputs from 193 to 1480 lm/ft. Available in 2'–8' lengths or seamless continuous runs up to 250 feet without lens breaks or hotspots. Mitered lit corners align cleanly with T-Grid layouts. Features include a toolless “Push to Eject” system for effortless installation and a flush T-Grid mounting mechanism. Custom powder coat finishes, 90+ CRI, Tunable White, and BABA compliance available. Proudly crafted in Huntington Beach, CA.
Innovative Microstructure EdgeTech Optics delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused (Lambertian). • Full 361° locking rotational arm hubs. • MEOTM allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. • Wall Arm Mount with 1” rotational hub. • Optional Ceiling Arm Mount with 1” rotational hub. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Beautifully machined end caps and matching arm hardware. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.
The HTG-3W, a 3" Aperture Wall Mount Linear fixture, incorporates innovative Microstructure EdgeTech Optics™ (MEO™) for exceptional optical control, ensuring seamless illumination and uniformity in performance. This sleek fixture offers a minimalistic, low-profile design, made possible by MEO™ technology, and is available in individual lengths or continuous runs up to 300 feet without lens breaks. Installation is simplified with a patented tool-less "Push to Eject" system, allowing for easy serviceability, and the design is free of visible fasteners, delivering a clean, refined aesthetic. Standard finishes include silver anodized, powder-coated white, and powder-coated black, with additional custom anodized and powder-coated RAL options available for a tailored aesthetic. HTG-3W fixture is proudly crafted in Huntington Beach, CA, USA.
The HTG-1P-RD-PDS combines cutting-edge Microstructure EdgeTech Optics™ with a minimalist suspension design for sleek, high-performance lighting. With a discreet 1/8” silver or white cord and chrome-plated connectors, each suspension cable carries both positive and negative conductors and supports drops up to 10 feet. This ultra-low-profile 1.5" aperture fixture delivers seamless, uniform illumination with your choice of Batwing, Glare Control, Diffused (Lambertian), Wall Wash, Room Fill, or Ceiling Wash optics. Available in direct or indirect configurations, with individual lengths or continuous runs up to 250 feet—free from lens breaks or pixelation. Installation is quick and easy with the toolless “Push to Eject” system. Features include custom powder coat finishes, SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertian) Optics. MEO™ allows for minimalistic 3” Aperture fixtures with extremely low profiles. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.
Innovative Microstructure EdgeTech Optics™ delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control or Diffused Optics. MEO™ allows for minimalistic 1.5” Aperture fixtures with extremely low profiles. Direct or Indirect illumination. Individual fixture lengths and seamless continuous rows with no lens breaks up to 400 feet. Window mullion mount or over doorways Remote and Integral Driver options Mullion mount — Innovative Toolless “Push to Eject” system allows for easy installation and serviceability. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available Proudly crafted in Huntington Beach, CA – USA.
The HTG-1W Rotational Arm Mount combines sleek design with powerful performance, featuring Microstructure EdgeTech Optics™ for precise light control, uniform illumination, and exceptional visual comfort. With a minimalist 1.5" aperture and ultra-low profile, it supports Batwing, Glare Control, or Diffused optics in direct or indirect configurations. Ideal for mounting to window mullions or over doorways, the fixture is available in individual lengths or seamless continuous runs up to 250 feet without lens breaks. The toolless “Push to Eject” system ensures easy installation and serviceability, with no visible fasteners for a clean architectural finish. Offered with remote or integral driver options, custom powder coat and anodized finishes, and specified lumen outputs. Proudly made in Huntington Beach, CA.
The Huntington 3 is a 3" aperture fixture that mounts directly to the T-Grid for seamless performance and integration. • Specify Batwing, Glare Control, Diffused (Lambertian) optics or Wall Wash Optics. • MEOTM allows for minimalistic 3” Aperture fixture while only being 1.38” deep. • High performance with visual comfort (224-1713 lm/ft). • Individual fixture lengths and seamless continuous rows with no lens breaks, pixelation or hotspots up to 400 feet. • Mitered lit corner patterns. • Innovative Toolless “Push to Eject” System allows for easy installation and serviceability. • Innovative T-Grid mounting mechanism for flush T-Grid surface mounting. • 16’ on center spacing with MEOBW (Batwing). • Custom powder coat and anodized finishes. • Specified Lumen Outputs (SLO) available. • Proudly crafted in Huntington Beach, CA - USA.
The HTGDU-3P is a 3-inch direct/indirect suspended fixture featuring Microstructure EdgeTech Optics™ for seamless, uniform illumination with precise optical control. It supports Batwing, Glare Control, Diffused, Wall Wash, Room Fill, and Ceiling Wash optics, with PRO options available. Designed with a 3.4 x 3.4 inch profile to match the HTG-3P, it offers individually controlled direct and indirect outputs, toolless “Push to Eject” installation, and continuous runs up to 250 feet. Mounting options include aircraft cable and 361° locking, with integral, remote, or in-canopy driver configurations. Proudly made in Huntington Beach, CA.
• Innovative Microstructure EdgeTech OpticsTM delivers unparalleled optic control and exceptional performance with seamless illumination and uniformity. Specify Batwing, Glare Control, Diffused (Lambertion) optics. • MEO allows for minimalistic 3” Aperture fixtures with extremely low profiles. • PRO optics available with Asymmetric, Wide and Narrow distributions. • Individually controlled Direct and Indirect MEO optics and lumen outputs. • Wall Mount or Rotational Arm Mount • Innovative Patent Pending Tool-less “Push to Eject” system alows for easy installation and serviceability. • Individual fixture lengths and seamless continuous rows with no lens breaks, pixilation or hotspots up to 400 feet. • Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. • Specified Lumen Outputs (SLO) available • Proudly crafted in Huntington Beach, CA - USA
The HTGDU-1P features cutting-edge Microstructure EdgeTech Optics™ for unmatched optical control and seamless, uniform illumination. Offering a minimalist 1.5" aperture and ultra-low profile, it supports a range of customizable optics - including Batwing, Glare Control, Diffused, Room Fill, Ceiling Wash, and Wall Wash. Individually controlled direct and indirect MEO™ optics deliver tailored lumen output. Available with custom powder coat finishes, tool-free installation, and flexible mounting options including 361° rotational aircraft cable. Choose from integral, remote, or emergency drivers, with SLO outputs up to 1480 lm/ft. Available as 90+ CRI standard, with Tunable White available. Made in Huntington Beach, CA and BABA compliant in most configurations.
Innovative Microstructure EdgeTech OpticsTM creates precise optic control, seamless illumination and uniformity with no pixilation or hot spots. Specify Batwing, Glare Control or Diffused Optics. MEO allows for minimalistic 1.5” Aperture fixtures with extremely low profiles Individually controlled Direct and Indirect MEO Optics and Lumen Outputs. Individual fixture lengths and seamless continuous runs with no lens breaks, pixilation or hotspots up to 400 feet. Integral Driver, Remote Driver, In-Canopy Driver and In-Canopy Emergency Driver options. No visible fasteners Custom powder coat and anodized finishes Specified Lumen Outputs (SLO) available
Shape offers the choice of aesthetically pleasing lens style to add visual appeal to office space. The back-lit LED engine with TIR optic ensures visual comfortable illumination.
Direct mount canless downlight with deep arch bezel • Small 2.6” aperture but powerful up to 800LM output • IC and Damp location rated with FT6/CMP plenum rated cable • Multiple optic option with excellent glare control and visual cut-off • 90CRI, 5CCT field changeable standard • Warm dim 3000-1800K optional
Peak Jr color changeable full cut off wall pack is aesthetically designed to meet specifier’s every wall-mounted lighting application. The modern rectilinear design comes in lumen packages ranging from 1,600 to 3,700 lumens to provide budget-friendly architectural outdoor wall mount illumination.
Vertical Lit Architectural Troffer