160 manufacturers · 18,987 products

Sleek square form meets superb function in Ubik, a lighting family designed to provide a multitude of creative options. Designed with a 2.5" aperture, Ubik Perimeter offers subtle, low-glare illumination in level, shallow, and deep recessed arrangements with HLO (High-Efficiency Lambertian Optic) or parabolic louver options for direct illumination.

Ubik Seal Perimeter offers subtle, low-glare illumination in leveled, shallow, and deep recessed arrangements with parabolic louvers. A gasketed clear polycarbonate lens is mounted on top of the louvers for extra protection. Ubik Seal Perimeter can brighten and broaden a space by illuminating perimeter walls. Use it in corridors,nurses' stations, offices, hospitality locations, and more. Three mounting positions Low-glare perimeter solution Up to 1200 lm/ft

The Via 3 Seal Perimeter creates a compact and continuously illuminated opening at the wall/ceiling intersection. The luminaire installs in grid or drywall ceilings in a choice of three arrangements: level with the ceiling plane, with a shallow 1" regress above the ceiling, and with a deep 3 ¼" regress. Via 3 Seal Perimeter is gasketed and sealed polycarbonate clear lens. Three mounting positions Lit corners available Wet Suitable (IP54)

Via Perimeter  creates a continuously illuminated “slot” at the wall/ceiling intersection. Lighted corners with an adjustable end and middle sleeves are available. Via Perimeter installs in grid or drywall ceilings in a choice of three arrangements: level, shallow 1", and deep 3 ¼".

Cava is a linear LED recessed, surface and pendant luminaire with a remarkably comfortable and surprising appearance. Using completely concealed and indirect LED arrays, Cava provides superior brightness control, while maintaining high efficacy by distributing light over the vaulted interior cavity of the luminaire. See separate spec sheets for other available design and mountings.

Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Two piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens for easy installation Compatible with wall-to-wall applications 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Continuous lensing – runs up to 150’ Standard 2’, 4’, 6’ and 8’units or continuous rows Fixture/run length increments down to 1/16” Single piece aluminum extrusion housing Linear runs with proprietary joiner design Snap-in lens and reflector for easy installation 3 Step MacAdam ellipse binning Efficacy up to 130 lm/W Soft diffuse direct lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible IC Rated Compatible with Armstrong Ceiling Systems and Slot Ceilings IC Rated Chicago Plenum available Compatible with Armstrong Ceiling Systems and Slot Ceilings

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

Standard 2’, 4’, 6’ and 8’units Fixture length increments down to 1/16” Two piece aluminum extrusion housing Snap-in lens for easy installation 3 Step MacAdam ellipse binning Efficacy up to 121 lm/W Soft diffuse indirect lighting Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current is standard 90 CRI (R9 50min) available CA Title 24 / JA8 installation compatible Consult factory for TM21, TM30, LM79 and LM80 L70 > 50,000 hours

• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible

• Continuous lensing - runs up to 150’ • Standard 2’, 4’, 6’ and 8’units or continuous rows • Fixture/run length increments down to 1/16” • Compatible with wall-to-wall applications (Adjustable) • Adjustable section allows for ± 2.7” overall run length • Single piece aluminum extrusion housing • Linear runs with proprietary joiner design • Snap-in lens and reflector for easy installation • 3 Step MacAdam ellipse binning • Efficacy up to 116 lm/W • Soft diffuse direct lighting • Approved for dry and damp locations • 0-10v dimming is standard • Dim to 1% of output current is standard • 90 CRI (R9 50min) available • JA8 installation compatible

Customizable extruded faceplates Continuous lens option available – up to 200’ 4’ and 8’ individual units, or continuous rows Straight runs with proprietary joiner design Soft diffuse direct lighting Textured powder coat finishes available in white, black and silver Premium finishes also available Approved for dry and damp locations 0-10v dimming is standard Dim to 1% of output current

The LGA-1R-LP Recessed LoPro delivers refined visual comfort and superior performance with Point Source Louver (PSL) optics. PSL offers an 80° deeper louver for an “extra quiet” visual experience—both designed to meet or exceed WELL Building glare standards. This low-profile fixture features a minimalist 1.5" aperture and supports a variety of ceiling integration options, including Trim Flange, Spackle Flange, multiple Grid Lay-in and Tegular systems, Bolt Slot, and Armstrong Interlude/USG Identitee. An innovative slider optic removal system ensures easy installation and maintenance. Available in individual lengths or seamless continuous runs, with integrated wired/wireless controls, sensors, and emergency driver options. Specified Lumen Outputs (SLO) available. Proudly crafted in Huntington Beach, CA and BABA approved in most configurations.

The HTG-1PR-LP LoPro Flush Perimeter fixture offers versatile mounting options with Trimless, Trim Flange, and T-Grid flush configurations. Engineered for low-profile installations, it fits within a slim 2.85"–3.05" depth behind the ceiling, ideal for low-plenum spaces. Designed with uncompromised performance, it provides exceptional glare control with options for diffused (Lambertian) or room-fill optics. With a minimalistic 1.5” aperture and specified lumen outputs (SLO) from 224 lm/ft to 1754 lm/ft, the fixture is available in individual lengths or continuous runs up to 300 feet with no lens breaks. Accessibility is simplified with a patented, toolless “Push to Eject” system, along with a Toolless Latch System and Quick-Click 5-Wire setup for fast, seamless installation. Each fixture is proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-3PR Regress Perimeter fixture features versatile mounting options, including Trimless, Trim Flange, and T-Grid regressed configurations, making it suitable for a variety of applications. It accommodates multi-depth ceiling options for most plenum installations, with a 1.75” regress requiring a depth of 5.75”–6.13” (integral driver) and a 3” regress needing 7”–7.38” (remote driver). Designed for optimal performance optics. The fixture boasts a minimalistic 3” aperture and specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft. Available in individual lengths or seamless continuous runs up to 300 feet with no lens breaks, the HTG-3PR ensures easy accessibility for drivers, wiring, and serviceability from below the ceiling, thanks to its patented toolless “Push to Eject” system. Additionally, the toolless latch system and Quick-Click 5-Wire setup facilitate simple and quick installation. Proudly crafted in Huntington Beach, CA, USA.

The HTG-3R-LP delivers high-output performance and architectural elegance in a low-profile design, ideal for any plenum-restricted installation. With depths ranging from 1.5"–1.75" (remote driver) or 2.14"–2.45" (integral driver), it features a sleek 3" aperture and supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics. Offering Specified Lumen Outputs (SLO) from 224 to 1754 lm/ft, the fixture supports seamless runs up to 250 feet with no lens breaks and up to 16’ on-center spacing at 35fc. All components—including drivers and wiring—are accessible from below the ceiling via the patented toolless “Push to Eject” system. Fast, clean installation is ensured with the Toolless Latch and Quick-Click 5 Wire system. Compatible with multiple ceiling types, including Trim and Spackle Flange, Grid Lay-in and Tegular (15/16” or 9/16”), Bolt Slot, Armstrong Interlude/USG Identitee, and 4” TechZone™ for seamless integration. Proudly crafted in Huntington Beach, CA – USA

Engineered for plenum-constrained spaces, the HTG-1R-LP Recessed LoPro delivers high-performance illumination with an ultra-slim profile—just 1.5" to 1.75" deep with remote driver, and 2.14" to 2.45" with integral driver. Featuring a minimalistic 1.5" aperture, it supports Batwing, Glare Control, Diffused (Lambertian), or Wall Wash optics for tailored performance without design compromise. Achieve seamless continuous runs up to 250 feet, with uniform light and no lens breaks. Delivering up to 1480 lm/ft with 90+ CRI and optional Tunable White, the fixture enables up to 16' on-center spacing at 35fc. Installation and maintenance are simplified with the patented toolless “Push to Eject” system, Toolless Latch System, and Quick-Click 5 Wire connection. Compatible with a wide range of ceiling types including Trim Flange, Spackle Flange, 15/16” or 9/16” Grid Lay-in and Tegular, Bolt Slot, or Armstrong Interlude/USG. BABA/BABAA compliant in most configurations – contact factory for details.