Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
270 products
BrandAll▾
SortRelevance▾
Evenlite Wireguards provide enhanced protection for emergency lighting equipment from physical damage
The Décor Designer SM is a sleek designer fixture that combines emergency and night lighting. It provides powerful emergency and normal lighting for over-doors and other exterior locations, with a full 90° cut-off.
The Tufflite H Series provides durable emergency lighting units with the ability to power remote fixture loads.
Tufflite “THZ”Industrial Class 1 Division 2 emergency lighting units are designed for use in Class 1 Division 2, Groups A, B, C, D, Class II Divisions 1&2 Groups E,F,G: T coded T4A, T3B, T3A, T2D, T2A, or T1.
The WeatherWay delivers dependable high-performance egress lighting for both normal and emergency lighting use.
The Décor Designer MM Linear LED combines emergency and night lighting in a sleek, designer fixture.
The PHOENIX series provides a compact self- contained emergency lighting unit with the ability to power remote fixture loads.
The Tufflite S Series provides compact emergency lighting units with the ability to power remote fixture loads.
The Decor DS series provides a self-contained emergency lighting fixture for recessing into suspended grid or lay-in ceiling systems.
Tufflite IXHL Industrial NEMA emergency lighting units are designed for use in hostile areas where oil, water and dust resistant equipment is required.
Aperion APAL delivers high-performance emergency lighting in a sleek, compact, and concealed design.
Telesis NXRH emergency lighting units are designed for use in IP66 and NEMA 4X wet locations
The VRWP cover provides an economical solution to adapt the popular TEBL emergency light to a wet location vandal resistant application.
The AtLite ATLEL series provides a NEMA 4X and UL924 code compliant emergency lighting solution for extreme commercial and industrial environments. The rugged die cast aluminum housing and UV stabilized polycarbonate lens are designed to withstand harsh environmental conditions. The fixture is wet location listed with a temperature rating of -30° to 50°C (-22° to 122°F), is IP66 listed and has a Hazardous location class 1 division 2 option. Two 300 lumen LED heads provide up to 58 feet of emergency egress coverage. Labor saving self diagnostics with a photocell testing capability are standard and perform required monthly and yearly testing. Tamper resistant screws are included to make the fixture vandal resistant.
The AtLite ATLELDWA series is UL924 wet location code compliant, die cast aluminum, architectural grade, wet location and New York City approved Emergency Light. Featuring an aesthetically pleasing look, it eliminates traditional unsightly emergency light trauma. The ATLELDWA is also perfect for indoor applications where an architectural appearance is desired. Key features include maintenance free LED’s with 100 lumen output (superior to a 9 watt incandescent source) or a 300 lumen output (superior to any 12 watt incandescent source), proprietary rotatable accuLED optics, a maintenance free nickel cadmium battery as well as self-diagnostics that reduce the labor associated with NFPA required testing. The SELDWA is available with temperature ratings of -20 °C to 55 °C or 0 °C to 40 °C. Additionally the ATLELDWA’s easy hang feature reduces installation time and cost. It is available with a silver, white, black or bronze finish.
The Rival LED Specification Series meets the standards of architectural requirements while providing many options and accessories to customize any installation.
The RF LED Surface Heads Series provides remote heads (no battery) manufactured in high impact, mar-resistant engineering grade thermoplastic. A highly polished reflector located behind the lamp provides abundant emergency light to the floor when connected to an emergency battery source. Several finishes and lamp styles are available.
The Atlite mini is a UL924 and NYC code compliant LED emergency light available with two or three 80 lumen heads. It's J-box size metal housing is easy to install and creates a minimal presense in the workspace.
The IBAR-M Series clearance bar is a multi-piece, modular, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting for each modular section. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.
This PHXF Series EMERGENCY w/Right Arrow outdoor sign is designed with high-intensity, LED reflected, backlit illumination and a block letter-style message face. The sign message is viewable in daylight conditions when off and can be illuminated at night or in low light conditions to optimize readability.It is designed with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
The IBAR-C Series clearance bar is a single-piece, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.
The IBAR-C Series clearance bar is a single-piece, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.
The IBAR-M Series clearance bar is a multi-piece, modular, 7" x 2.5" extruded aluminum system. Includes Easyglide Adjustable Eyebolts for top mounting for each modular section. Painted traffic yellow and displays your required message in factory-applied, high-performance red reflective vinyl. Custom paint colors and graphics are available upon request.
GC6DRREM
GC8DRREM
Remote Capable Dual Adjustable LED Emergency Light
Remote Capable LED Exit/Emergency Light Combination
DIFFUSER: Opal White Injection Molded Polycarbonate standard. Optional Frosted Opal Lens (FRO). DRIVER: Universal Voltage 120/277v Electronic Driver with 0-10V dimming. EMERGENCY: Optional Integral or Remote LED Emergency Battery FASTENERS: (4) Stainless steel tamperproof Torx screws to secure lens to backplate. FINISH: Extremely durable oven baked Polyester Powder Coat is Standard.
8'' Round, thin profile, LED ceiling light with edge-lit panel for wide, even light distribution. White acrylic diffuser. Available in three finishes. Optional 90 Minute Emergency Backup Batery available in white finish. Retrofit kits available for 4in. and 6in, ceiling cans (sold seperately).
This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.
Modern LED outdoor wall sconce with durable metal housing. White glass diffuser. Powder coat finish. Vertical or horizontal mounting. Mount in groups for a beautiful wall art effect. Available in three sizes and two finishes. Emergency batter back-up option available on larger sizes.
Modern LED outdoor wall sconce with durable metal housing. White glass diffuser. Powder coat finish. Vertical or horizontal mounting. Mount in groups for a beautiful wall art effect. Available in three sizes and two finishes. Emergency batter back-up option available on larger sizes.
Cube Architectural 5.5" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black
Tube Architectural 6" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black
Tube Architectural 8" LED Wall Mount with Emergency Battery Back Up Flood Beam 2700K in Black
RSL11 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 15W, 18W, 20W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM
RSL4 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 8W, 10W, 12W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM
USE OF PRODUCT Great solution for residential, multifamily, and hospitality interior applications where a surface mount fixture is desired. This fixture offers glare control lens, five color temperature selectability, and may be paired with a fire-rated j-box to meet 2-hour requirements. RSL7 (0–10V LUMINAIRE) FEATURES - Wattage Selectable: 9W, 12W, 15W - Color Temperature Selectable: 2700K, 3000K, 3500K, 4000K, 5000K - CRI: 90+ - Voltage/Dimming: 120–277V (0–10V) - Visual Comfort: Glare control lens - Emergency: 8W EM COLOR TEMPERATURE SELECTABLE Color temperature selectable luminaire allows for easy control between 2700K, 3000K, 3500K, 4000K, and 5000K. LENS Specially designed lens designed for visual comfort and optimum glare control. LUMINAIRE CONSTRUCTION Luminaire is constructed of aluminum for maximum LED heat dissipation. FIRE-RATED ENCLOSURE Constructed of 16-gauge galvanized steel to meet 2-hour fire requirements. Comes standard with adjustable bar hangers (14"–24") for wood joist ceiling installations. Luminaire enclosure may be adjusted vertically to accommodate varying ceiling thicknesses. INSTALLATION Fixture may be mounted to a 4" octagonal junction box (supplied by others) or with the RFJ-S-R42 (Fire Rated Enclosure) by Rayon Lighting. EM 8W EM meets 90-minute illumination time requirements. Illumination test switch on the luminaire allows for easy installation and a minimalistic appearance. EM offers overcharge protection, discharge protection, and short circuit protection. LISTINGS/COMPLIANCE/WARRANTY • ETL listed • Energy Star certified • State of California Title 24 and JA8 compliant • Wet location rated • UL 263 (2-hour fire-rated) • IC rated • Air-tight ASTM-E283 • 5-year limited warranty
Pendant indoor series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. Copper-free aluminum extruded housings and wall-mount arm, and die-cast reflector-mount trim, endcaps and canopy. Copper-free die-cast aluminum heat-sink passive cooling system. - Hi-light transmittance, internally coated, soda-lime pressed glass diffuser, physically and chemically quenched to increase thermal shocks and mechanical resistance. The clear or matte prismatic glass diffusers are available in a variety of standard and custom colors. - Darker reflector colors (e.g. blue, red, etc) have an translucent white coating inside to provide a uniform light output while allowing the colored glass to be an elegant accent. The glass diffuser (to be ordered separately) is suspended by three field-adjustable aircraft cables, 75” long. High-efficiency COB combined with an optimized passive cooling system provides a long LED life. Diffuse light emission. Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. Optional, integral, emergency battery-pack designed for a minimum operation of 90 minutes (EMPK). Consult factory for custom finishes and non-catalogued CCT (Kelvin) options. Consult factory for special cable lengths (add SCL to part number). 5-year warranty. - Product meets Buy American requirements within ARRA.
Pendant indoor series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. Copper-free aluminum extruded housings and wall-mount arm, and die-cast reflector-mount trim, endcaps and canopy. Copper-free die-cast aluminum heat-sink passive cooling system. - Hi-light transmittance, internally coated, soda-lime pressed glass diffuser, physically and chemically quenched to increase thermal shocks and mechanical resistance. The clear or matte prismatic glass diffusers are available in a variety of standard and custom colors. - Darker reflector colors (e.g. blue, red, etc) have an translucent white coating inside to provide a uniform light output while allowing the colored glass to be an elegant accent. The glass diffuser (to be ordered separately) is suspended by three field-adjustable aircraft cables, 75” long. High-efficiency COB combined with an optimized passive cooling system provides a long LED life. Diffuse light emission. Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. Optional, integral, emergency battery-pack designed for a minimum operation of 90 minutes (EMPK). Consult factory for custom finishes and non-catalogued CCT (Kelvin) options. Consult factory for special cable lengths (add SCL to part number). 5-year warranty. - Product meets Buy American requirements within ARRA.
Long-lasting energy-efficient wall pack series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Extra-clear, flat, tempered silk-screened soda-lime glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - High-efficiency COB, combined with an optimized passive cooling system, provides a long LED life. - Specular vacuum metallized polycarbonate reflector provides full-cutoff, no glare design, and precision optical control. - IESNA Type III light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral 1-10 V dimming driver. - Integral on-field settable tri-level lumen/wattage packages DIP switch proprietary driver for SHIELD+ 1 (stating factory setting at the lowest level). - Standard knock-out template for multiple junction box mounting. - Suitable for three surface mounted conduit entry points with 1/2" NPS plugs. - BUTTON and SWIVEL photoelectric switch options available (ordered separately). - Consult factory for dimming options, custom finishes, and non-cataloged CCT (Kelvin) options. - Consult factory for remote emergency battery pack options (EMPK). - Product meets Buy American Act requirements within ARRA.
Model#: UVK-900XX The Vekter Extended Arm Post Top is a modern, die-cast aluminum decorative luminaire featuring a square arm design and excellent downward light distribution that meets dark sky compliance standards. Its sleek form and precision optical system deliver outstanding visual appeal with minimal glare and reduced light pollution. This luminaire is available in two configurations—single arm or double arm—to suit a variety of aesthetic and design requirements. What sets the Vekter apart is its availability in Type I, II, III, IV, and V light distribution options, allowing for tailored illumination between luminaires. Wide fixture spacing can be achieved using a Type II optic, while maintaining uniformity that complies with path of egress requirements—resulting in greater energy savings and lower installation costs. For added flexibility, the Vekter can be manufactured with mixed beam optics, such as combining Type II and Type IV within the same fixture, to achieve custom light distribution.
Model#: USA-3XXXX A range of small and large circular wall mounted bulkheads with a vandal resistant UV stabilized polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of different grill and visor options. As with all wall mounted luminaires, these fixtures are provided with a special self-healing waterproof cable gland that prevents water entering the fixture after wiring. This fixture can be provided with an integral self diagnosing emergency battery pack.
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
The ILC Remote 20 Amp, Emergency Bypass Relay combines normal relay operation with a UL 924 bypass relay in one convenient package. Relays are available in both a wired (R20D-EM) and wireless (WR20D-EM) version that uses the 915MHz radio frequency for communication to ILC wireless devices. When normal power is lost the EM relay will automatically force ON the EM load and send dimming to 100%. When normal power is restored the device will return to normal control. The R20D-EM and WR20D-EM have a relay test button, and a wired input that can be used for a remote test switch or as an override connection from a fire alarm system.
Clear-Vu Lighting’s award-winning FLEX SLS Site Lighting System is safer, more energy efficient, cost-effective, and flexible than traditional line voltage temporary lighting systems including incandescent/compact fluorescent/LED lamp-based “stringers” and 400W metal halide fixtures or their fluorescent equivalents for a wide variety of applications. FLEX LED modules are IP66-rated, extremely rugged and durable (can withstand 15′ drop test) and theft-resistant due to the proprietary T-Connectors. And now, with the Intelligent Control System, an entire jobsite’s temporary lighting can serve as an emergency alarm—controlled and managed from a single access point! The FLEX SLS Site Lighting System includes three standard modules designed to simplify layouts in 10/20/30 foot spacing. All the modules can be comingled on the same 24VDC low-voltage bus line, and are backwards compatible with the previous generations of the FLEX System.
Clear-Vu Lighting’s award-winning FLEX SLS Site Lighting System is safer, more energy efficient, cost-effective, and flexible than traditional line voltage temporary lighting systems including incandescent/compact fluorescent/LED lamp-based “stringers” and 400W metal halide fixtures or their fluorescent equivalents for a wide variety of applications. FLEX LED modules are IP66-rated, extremely rugged and durable (can withstand 15′ drop test) and theft-resistant due to the proprietary T-Connectors. And now, with the Intelligent Control System, an entire jobsite’s temporary lighting can serve as an emergency alarm—controlled and managed from a single access point! The FLEX SLS Site Lighting System includes three standard modules designed to simplify layouts in 10/20/30 foot spacing. All the modules can be comingled on the same 24VDC low-voltage bus line, and are backwards compatible with the previous generations of the FLEX System.
Egress marker light with 1W or 2W LED for public access, bridges, tunnels, docks, piers, walkways & pathways.
525 W - 2.2 kW Lighting Inverter This UL 924 Listed, high-efficiency (up to 98.8%) fast-transfer inverter has a 2 millisecond or less transfer time, and includes monitored surge protection for LED lighting / drivers. The “Model FST” performs a weekly inverter self-diagnostic … no other fast-transfer or standby inverter manufacturer offers this! Wall- and floor-mount models provide the required 90 minutes of emergency backup power. Other runtimes up to 120 minutes are available.
58.5 kW - 112.5 kW Lighting Inverter (3 Phase) This LED-compatible, NFPA 101 compliant inverter features an intelligent, robust design providing enhanced levels of quality, reliability, and energy savings. Unique to CPC lighting inverters, the “Model ELS” offers four (4) field-selectable modes of operation based on input power conditions, lighting design, and the desire for high operating efficiency. All kW sizes are UL 924 Listed as “Emergency Lighting Equipment” (90 minutes runtime standard) and “Auxiliary Lighting and Power Equipment” (30, 60, and 120 minute runtimes available). C-UL models Listed to CSA C22.2 No. 141-15 are available with runtimes of 30, 60, or 90 minutes.