Line Card
160 manufacturers · 18,987 products
Search
Product TypeAll types▾
15,153 products
BrandAll▾
SortRelevance▾
Cone Sconce merges form and function in a minimalist design that makes a bold yet quiet statement. Mountable in either up or down orientation, it offers flexible placement for modern interiors. Designed for those who value intentional objects, Cone brings sculptural simplicity and subtle elegance to any space.
The CLM-S 20” Recessed Gas Station Canopy luminaire with mounting system designed for typical canopy steel pan structures is available with an optical distribution designed to replace HID lighting systems up to 400w MH or HPS. The fixture housing is designed to emulate legacy HID canopy lights that mount through a 4 minimum diameter cut hole in the canopy. A galvanized steel back plate is provided to allow for installation over larger holes. Driver and power connection are made in an IP66 rated powder coated die cast mounting box above the canopy. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements.
The CLR18 Architectural Round Canopy is available in Type II, III, IV or V distributions designed to replace HID lighting systems up to 400w MH or HPS. Typical area lighting applications include retail centers, industrial parks, schools and universities, public transport and airports, office buildings and medical facilities. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements.
The MTLM luminaire is available in three wattages designed for typical applications including general area, parking, flood, security, and accent lighting for retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be used based on light level and uniformity requirements.
The PKLM small full cutoff wall luminaire is available in three wattages with a specially designed Type IV wide forward throw optical distribution that is designed to replace HID lighting systems of up to 175W MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 25 feet can be used based on light level and uniformity requirements.
The STLM static color cut-off area, wall mounted or flood light luminaire is available in two wattages with a wide choice of mounting configurations and IES Type III or V distributions or a 30¡ narrow beam designed to provide accent colored light using Blue, Green, Red or Amber LED arrays. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories and to heights of 10 to 20 feet based on light level and uniformity requirements.
The WLLM cutoff wall pack luminaire is available with a choice of optical distributions designed to replace HID lighting systems up to 175w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be used based on light level and uniformity requirements.
High lumen output, integrated-LED well light achieves new levels of lighting performance, matching a line-voltage fixture in low voltage. Get the impressive impact you need to light tall trees, flagpoles, and multi-story structures.
High Lumen Output. Powerful integrated LED fixture for maximum impact directional accent lighting. Has integrated RGB LED.
Large sized high lumen output solid brass accent/uplight with integrated LED. Includes frosted lens. Adjustable knuckle is locked with thumbscrew.
Clear convex lens, for uplighting. A complete family of in-grade lighting solutions for a variety of lighting applications. Combines a rugged brass lid with a non-corrosive polymer housing for long life. RGBW Capable, and Bluetooth enabled.
VersatileÊ uplight with numerous options for lamps, mounting options and optional color-tunable, dimmable Bluetooth LED module.
VersatileÊ uplight with numerous options for lamps, mounting options and optional color-tunable, dimmable Bluetooth LED module.
Cast brass lid with open glass lens. Includes integrated Bluetooth RGB LED module standard.
Clear convex lens, for uplighting. A complete family of in-grade lighting solutions for a variety of lighting applications. Combines a rugged brass lid with a non-corrosive polymer housing for long life.
Pickleball & Tennis Court Lighting The Baseline (BAS) is a contemporary styled, low profile linear aesthetic luminaire. With 5 sizes, and unique mounting configurations, the BAS is the versatile fixture that gives a unique signature to all levels of court lighting. The BAS is suitable for mounting oriented into the court or twinned along the edge of the court. Baseline requires no davit arms hanging over the court.
ONE PIECE CORROSION RESISTANT, DURABLE CAST ALUMINUM CONSTRUCTION. MINIMUM .210 WALL THICKNESS. BASE CONSISTS OF A OCTAGONAL LOWER SECTION AND AN OCTAGONAL TAPERED UPPER SECTION CONTAINING A FLUSH HAND HOLE COVER CONFORMING TO BASE DESIGN. HAND HOLE COVER SUPPLIED WITH TAMPER RESISTANT HARDWARE. GROUNDING LUG PROVIDED INSIDE BASE OPPOSITE HAND HOLE.
Round, straight steel pole, comes in 3 diameter sizes: 4", 5" and 6". Height range from 10ft - 30ft maximum. 7 or 11 gauge wall thickness. 9" - 14" bolt circle. Drill mount or tenon mount with optional tenon adapters. Slotted base plate. Steel base plate cover and pole cap. Structural quality steel shaft (46,000 psi min). Structural quality hot rolled steel base plate (36,000 psi min.). Continuous circumferential welding of shaft and base plate. reinforced handhole. Polyester powdercoat standard. Galvanized option. Prime finish only option.
Round tapered aluminum pole. 40 foot maximimum height. 0.125" or 0.188" wall thickness. 10-1/4" - 13" bolt circle. Drill mount or tenon mount with optional tenon adapters. Slotted base plate. Aluminum base plate cover and pole cap. Extruded 6063 alloy shaft, heat treated to a t6 temper. Cast aluminum gusseted base plate, a-356 aluminum, heat treated to a t6 temper. Continuous circumferential welding of shaft and base plate (both inside bottom and outside top). Reinforced hand hole. Polyester powdercoat standard. Anodized shaft option.
The Round Non-Tapered Aluminum Poles (RTNA) from U.S. Architectural Lighting are contemporarily constructed using extruded 6063 alloy aluminum tubing, which is heat-treated to a T6 temper for enhanced durability. These poles are available in heights ranging from 8 to 30 feet, depending on the pole diameter, which can vary between 4 inches, 5 inches, 6 inches, and 6_ inches.Ê
Traditionally styled, two piece, wrap around cast aluminum base for use with integrated shaft. Contoured hand hole cover with tamper proof hardware. Grounding lug opposite hand hole. Compatible with 12" max diameter shafts. Cast aluminum construction with minimum wall thickness of 0.275". 3/4" cast aluminum anchor ring welded 1" above bottom. Standard polyester powdercoat finish.
The modern SNTA, Square, Non-Tapered, Aluminum Series pole by U.S. Architectural Lighting features durable square, aluminum shafts pole with anchor bases for easy installation and maintenance. This series is designed for urban and commercial environments, ensuring structural stability and flexibility with multiple tenon options and finishes.
8" square, straight steel pole. 50 foot maximum height. 7 or 11 gauge wall thickness. 16" bolt circle. Drill mount or tenon mount with optional tenon adapters. Slotted base plate. Steel base plate cover and pole cap. Structural quality steel shaft (46,000 psi min). Structural quality hot rolled steel base plate (36,000 psi min.). Continuous circumferential welding of shaft and base plate. reinforced handhole. Polyester powdercoat standard. Galvanized option. Prime finish only option.
The 1060 series offers fluted shafts constructed from 6063 alloy aluminum with a .188 wall thickness. These shafts are available in 4″, 5″, and 6″ diameters, making them a traditionally styled option for pairing with Sun Valley’s decorative bases.
The straight shafts in the 1040-1090 pole series are extruded from 6063 alloy aluminum and heat-treated for strength. Available in diameters of 4″, 5″, and 6″, these traditionally styled shafts are ideal for pairing with Sun Valley decorative bases.
The Catenary Mount offers an innovative solution for contemporary, cable mounted outdoor lighting design. The Catenary Mount supports pendant-mounted luminaires, providing unparalleled flexibility in lighting placement. The system features a cast aluminum cable hanger compatible with cables from 0.25″ to 0.50″ in diameter, along with a Trulevel™ Coupling System for precise plumb installation. Integrated water-tight glands accommodate wiring with diameters from 0.24″ to 0.47″, ensuring weather-resistant operation. Finished with a durable TGIC polyester powder coat, this mount delivers long-lasting durability and versatility, perfect for illuminating municipal areas, alfresco spaces, or architectural highlights.