160 manufacturers · 18,987 products

B16-35-BASE

A13-30-BASE

A20-40-BASE

A9-BASE

C12-30-BASE

B9-21-BASE

B10-27-BASE

C-LU2-3-BASE

EM-24-44-BASE

C-BASE

BC-CI-IVY-7-7

BC-CI-FLUTED-8-7

A14-36-BASE

B14-31-BASE

BD05 2 Piece Decorative Cast Aluminum(Clamshell).For Base Plate 11” 1/4 OD.

DB01, 2 Piece Decorative Cast Aluminum(Clamshell).                             For Base plate 9″ SQ.

CLP-M86 2 Piece Decorative Cast Aluminum(Clamshell).For Base plate 9″ SQ or 12” Sq.

CLP-M40, Decorative Cast Aluminum.(1 pcs)

DB06, 2 Piece Decorative Cast Aluminum(Clamshell).For Base Plate 9″ Sq or 12” Sq.

DB03,2 Piece Decorative Cast Aluminum(Clamshell).For Base plate 9″ SQ.

DB04, Decorative Cast Base.(1 pcs)

DB02, 2 Piece Decorative Cast Aluminum(Clamshell).   For Base plate 9″ SQ.

Traditionally styled, two piece, wrap around cast aluminum base for use with integrated shaft. Contoured hand hole cover with tamper proof hardware. Grounding lug opposite hand hole. Compatible with 12" max diameter shafts. Cast aluminum construction with minimum wall thickness of 0.275". 3/4" cast aluminum anchor ring welded 1" above bottom. Standard polyester powdercoat finish.

Half caged globes available in three sizes. Extruded aluminum arm mount option. Other wall mount arms available. 3" ID tenon mount receptor at base of luminaire. Heavy gauge, precision cast aluminum fitter and cage. Stainless steel hardware. Polyester powdercoat finish.

Prismatic borosilicate glass refracting lens. Heavy gauge, corrosion resistant cast aluminum base. Top is hinged for access. Luminaire base has 3” I.D. opening for tenon. All hardware is stainless steel.

ONE PIECE CORROSION RESISTANT, DURABLE CAST ALUMINUM CONSTRUCTION. MINIMUM .210 WALL THICKNESS. BASE CONSISTS OF A OCTAGONAL LOWER SECTION AND AN OCTAGONAL TAPERED UPPER SECTION CONTAINING A FLUSH HAND HOLE COVER CONFORMING TO BASE DESIGN. HAND HOLE COVER SUPPLIED WITH TAMPER RESISTANT HARDWARE. GROUNDING LUG PROVIDED INSIDE BASE OPPOSITE HAND HOLE.

5" round smooth, straight aluminum shaft for integrated cast aluminum decorative bases. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4" round smooth, straight aluminum shaft for integrated cast aluminum decorative bases. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

6" round smooth, straight aluminum shaft for integrated cast aluminum decorative bases. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4" round fluted, straight aluminum shaft for integrated cast aluminum decorative base. 16 flutes (flat), 0.188" minimum wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

7" to 5" round, fluted, tapered cast aluminum shaft. for integrated decorative cast aluminum base. 16 sharp flutes. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a t6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard.

4" round fluted, straight aluminum shaft for integrated cast aluminum decorative base. 16 flutes (flat), 0.188" minimum wall thickness. 5" round fluted, straight aluminum shaft for integrated cast aluminum decorative base. 18 flutes (flat), 0.188" minimum wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a t6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5" fluted straight to 4" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

ONE PIECE CORROSION RESISTANT, DURABLE CAST ALUMINUM CONSTRUCTION. MINIMUM .210 WALL THICKNESS. BASE CONSISTS OF A OCTAGONAL LOWER SECTION AND AN OCTAGONAL TAPERED UPPER SECTION CONTAINING A FLUSH HAND HOLE COVER CONFORMING TO BASE DESIGN. HAND HOLE COVER SUPPLIED WITH TAMPER RESISTANT HARDWARE. GROUNDING LUG PROVIDED INSIDE BASE OPPOSITE HAND HOLE.

5" to 3" smooth, tapered aluminum shaft for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a t6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4" to 3" smooth, tapered aluminum shaft for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5" smooth straight to 3" smooth straight aluminum transition shaft. For integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (pt). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4-1/4" or 5-1/4" to 3-1/2" round, fluted, tapered cast aluminum shaft. For integrated decorative cast aluminum base. 16 flat flutes. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

6" to 4" smooth, tapered aluminum shaft for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4" smooth straight to 3" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (pt). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5" round fluted, straight aluminum shaft for integrated cast aluminum decorative base. 18 flutes (flat), 0.188" minimum wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

6-1/2" or 7-1/2" to 4" round, fluted, tapered cast aluminum shaft. for integrated decorative cast aluminum base. 12 sharp flutes. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

4-1/4" or 5-1/4" to 3-1/2" round, fluted, tapered cast aluminum shaft. For integrated decorative cast aluminum base. 16 flat flutes. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

6" fluted straight to 4" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5" fluted straight to 3" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

Traditionally styled, two piece, wrap around cast aluminum base for use with integrated shaft. Contoured hand hole cover with tamper proof hardware. Grounding lug opposite hand hole. Compatible with 12" max diameter shafts. Cast aluminum construction with minimum wall thickness of 0.275". 3/4" cast aluminum anchor ring welded 1" above bottom. Standard polyester powdercoat finish.

5-1/2" or 7" to 4" round, fluted, tapered cast aluminum shaft. For integrated decorative cast aluminum base. 8 rounded flutes. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a t6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5" smooth straight to 4" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (pt). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a t6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

6" smooth straight to 4" smooth straight aluminum transition shaft. for integrated cast aluminum decorative base. 0.125" or 0.188" wall thickness. 2-7/8" OD tenon top. 3" long for post top luminaire (PT). 6" long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

The 600 Series base is a highly stylized, tapered cast aluminum base with a 12″ diameter and a height of 34″. This sturdy base features a detailed fluted design and tamper-resistant hardware for security. Finished with a TGIC polyester powder coat, it ensures long-lasting durability for street and landscape lighting installations, blending classic design with robust performance.

The 500 Series base, standing 41″ high with a 12″ diameter, features a traditionally styled design with decorative vertical fluting and a smooth stepped bottom section. Made from robust cast aluminum and finished with a TGIC polyester powder coat, this base ensures both durability and aesthetic appeal. It’s perfect for outdoor lighting, combining elegance with strength.

The traditionally styled 400 Series base offers durable, corrosion-resistant cast aluminum construction with a 12″ diameter bolt circle. Its smooth, stepped bottom section and decorative tapered fluted design make it both functional and visually appealing. Standing 33″ high, the base is designed to pair with a variety of decorative outdoor lighting shafts, perfect for enhancing streetscapes or landscapes.

The 300 Series base offers a traditionally styled design, constructed from corrosion-resistant aluminum. Measuring 43″ in height with a 12″ diameter bolt circle, this base showcases detailed vertical flutes and a smooth, tapered bottom. Its tamper-resistant hardware and durable finish make it ideal for supporting a range of outdoor lighting applications in classic landscapes and streetscapes.

The traditionally styled 200 Series base is built with a wide, smooth-stepped bottom section, topped with an organic stylized rosette, measuring 21″ in height and 19″ in diameter. This durable cast aluminum base supports up to a 6.5″ shaft diameter, perfect for elegant outdoor lighting solutions.

The traditionally styled 100 Series base features a 48″ height and a 14″ diameter. Its cast aluminum construction includes a decorative Rosette at the top and a large hand hole with tamper-resistant hardware. Designed for durability and aesthetic appeal, this base is ideal for supporting outdoor lighting fixtures in public and residential spaces.

6″ round smooth, straight aluminum shaft for integrated cast aluminum decorative bases. 0.125″ or 0.188″ wall thickness. 2-7/8″ OD tenon top. 3″ long for post top luminaire (PT). 6″ long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.

5″ round smooth, straight aluminum shaft for integrated cast aluminum decorative bases. 0.125″ or 0.188″ wall thickness. 2-7/8″ OD tenon top. 3″ long for post top luminaire (PT). 6″ long for multiple luminaires. See Compatibility Chart for base and maximum height. Extruded 6063 alloy shaft, heat treated to a T6 temper. Shaft is circumferentially welded to base. Optional standard base plate for use with split bases, consult factory. Polyester powdercoat standard. Anodized shaft option.